Course detail
Construction documents examination
FAST-CW02Acad. year: 2009/2010
Activities related with the construction and their inspection by the production company staff, construction supervisor and accredited laboratories. Photo and film documentation of construction by using internet - Parc.cz system, into the system also the photo of the initial condition can be inserted, construction management from the point of view of quality and occupational safety regulations.
Language of instruction
Czech
Number of ECTS credits
4
Mode of study
Not applicable.
Guarantor
Department
Institute of Technology, Mechanisation and Construction Management (TST)
Learning outcomes of the course unit
By mastering the course the students will acquire basic knowledge of technology procedures implemented on a selected site that they will visit regularly. They will document the implemented technologies by photos or camera recordings. At the semester end the students will produce a CD and write commentary to the course of the selected operations procedures.
Prerequisites
Knowledge of technology processes of buildings works and basic knowledge of the foundation engineering.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
Not applicable.
Assesment methods and criteria linked to learning outcomes
Requirements for successful completion of the subject are specified by guarantor’s regulation updated for every academic year.
Course curriculum
1. Photo documentation before the start of construction, periodic photographing of units from the agreed places, air photos and film recording, film recording of important technology activities, time sampling recording of the construction by digital camera installed on site, creation of an archive CD disc with documentation. DVD creation with video documents and inserting of documents.
2. Design planning documents and their completion for working drawings, insulation details, details of opening fills, roof and attic.
3. Proposals for technology procedures of main and demanding activities and new unknown procedures, earth works, walling plasterboard structures, padding warm, plastering.
4. Builders log keeping, construction preparation, inspection plan in Contec system and Book of in-process inspections, health safety and protection project.
5. Geotechnical categories for various structure types, types of geological surveys, soil borings, drills, suitability of the base soil, environmental impacts, resistance of structures against deformations, impact of the new structure on the surrounding buildings. Life time, material protection.
6. Properties of the base soil, separation capability, soil classification, consistency, rock strength, site supervision, monitoring and maintenance, evaluation of geotechnical information, natural slope of free bulk rocks, bulking, absorption capacity.
7. Embankments, drainage, improving and stiffening of base soil, basic requirements, inspection and manners of the compacting extent, depositing and compacting procedure, compacting experiment, general requirements for the inspection within the site supervision.
8. Building foundation, types of humidity, insulations, suitable formwork, inspection of foundation construction, manners of concrete pouring, using a pump, feeder pipe, crane, establishment of dump areas and site roads.
9. Bearing and peripheral structures, ceramic, sandwich, timber constructions, special materials, application of IZO - beams.
10. Establishment of structures of gyps, attic partitions, opening fills, installation of roof windows, correct application and positioning of the diffusion foil and vapour barrier – use of producer CD and discussion on the details.
11. Performing and assembly of ceiling structures, monolithic and semi-products, inspection junctions during realization, lifting mechanisms, crane ways, building lifts
12. Performing of contact thermal insulations, external and indoor plasters, inspection manner, correct performance, prescription of inspection markings on site.
13. Performing of residential and industrial floors, procedural principles, inspection manner before laying of the final layer.
2. Design planning documents and their completion for working drawings, insulation details, details of opening fills, roof and attic.
3. Proposals for technology procedures of main and demanding activities and new unknown procedures, earth works, walling plasterboard structures, padding warm, plastering.
4. Builders log keeping, construction preparation, inspection plan in Contec system and Book of in-process inspections, health safety and protection project.
5. Geotechnical categories for various structure types, types of geological surveys, soil borings, drills, suitability of the base soil, environmental impacts, resistance of structures against deformations, impact of the new structure on the surrounding buildings. Life time, material protection.
6. Properties of the base soil, separation capability, soil classification, consistency, rock strength, site supervision, monitoring and maintenance, evaluation of geotechnical information, natural slope of free bulk rocks, bulking, absorption capacity.
7. Embankments, drainage, improving and stiffening of base soil, basic requirements, inspection and manners of the compacting extent, depositing and compacting procedure, compacting experiment, general requirements for the inspection within the site supervision.
8. Building foundation, types of humidity, insulations, suitable formwork, inspection of foundation construction, manners of concrete pouring, using a pump, feeder pipe, crane, establishment of dump areas and site roads.
9. Bearing and peripheral structures, ceramic, sandwich, timber constructions, special materials, application of IZO - beams.
10. Establishment of structures of gyps, attic partitions, opening fills, installation of roof windows, correct application and positioning of the diffusion foil and vapour barrier – use of producer CD and discussion on the details.
11. Performing and assembly of ceiling structures, monolithic and semi-products, inspection junctions during realization, lifting mechanisms, crane ways, building lifts
12. Performing of contact thermal insulations, external and indoor plasters, inspection manner, correct performance, prescription of inspection markings on site.
13. Performing of residential and industrial floors, procedural principles, inspection manner before laying of the final layer.
Work placements
Not applicable.
Aims
Making the student acquainted with technology processes, application of elaborated technology processes at regular inspection of individual constructions in the construction process. On a selected construction regular video records are taken for individual technology procedures and photo documentation is made on the course of construction. At the end the students prepare a CD with comments based on the obtained documentation on the construction course.
Specification of controlled education, way of implementation and compensation for absences
Extent and forms are specified by guarantor’s regulation updated for every academic year.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Blaich J.: Poruchy staveb. Jaga Group, Bratislava, 2001. (CS)
Cihlářský svaz Čech a Moravy: Cihlářský lexikon. 2001. (CS)
Juríček I.: Technológia pozemných stavieb - hrubá stavba. Jaga Group, Bratislava, 2001. (CS)
Musil F., Tuza K.,: Stavebně technologické projektování hrubé stavby. Ateliérová tvorba, VUT Brno, 1992. (CS)
Vlček K.: Stavebně technologická příprava staveb. Jaga Group, Bratislava, 1998.
Cihlářský svaz Čech a Moravy: Cihlářský lexikon. 2001. (CS)
Juríček I.: Technológia pozemných stavieb - hrubá stavba. Jaga Group, Bratislava, 2001. (CS)
Musil F., Tuza K.,: Stavebně technologické projektování hrubé stavby. Ateliérová tvorba, VUT Brno, 1992. (CS)
Vlček K.: Stavebně technologická příprava staveb. Jaga Group, Bratislava, 1998.
Recommended reading
Platné technické normy. 0.
Classification of course in study plans