Course detail

Vehicle Powertrain

FSI-QHVAcad. year: 2027/2028

The Vehicle Powertrain course introduces students to the fundamental concepts and layouts of powertrains for passenger and commercial vehicles featuring various propulsion systems. The computational powertrain models covered in the course serve as an essential tool for determining suitable concepts and parameters for contemporary power units. In addition to the engine itself, students are acquainted with the key functional assemblies of the drivetrain responsible for transmitting torque to the driven wheels. Computer laboratory sessions are complemented by practical demonstrations of the relevant powertrain components.

Language of instruction

Czech

Number of ECTS credits

6

Assignment to study programme types

Master's

Mode of study

Not applicable.

Learning outcomes of the course unit

The student understands the general principles of the generation and transmission of forces and torques in powertrains. The student is able to select and apply an appropriate computational model for the conceptual calculation of a powertrain with respect to the loading of its components and assemblies, as well as vibration and noise. The student can assess and evaluate the suitability of a chosen powertrain concept for a given application. The student is able to carry out the conceptual design of a powertrain sub-assembly.

Entry knowledge

Knowledge of undergraduate-level mathematics, including elementary algebra and geometry (algebraic expressions and equations, quadratic equations, trigonometric functions, analytic geometry), combinatorics, linear algebra (matrices, determinants, systems of linear equations, etc.), differential and integral calculus, and ordinary differential equations. Fundamental knowledge of kinematics, dynamics, mechanics of materials, and machine design.

Rules for evaluation and completion of the course

The course is concluded with a course credit and an examination. Obtaining the course credit is conditional upon attendance, active participation in computer laboratory sessions, and passing a credit test during the final week of the semester. The examination assesses the knowledge acquired in both lectures and sessions; it is written and divided into two parts covering engines and transmissions. Both parts carry an equal maximum number of points, and a minimum combined score of 50% across both parts is required to pass the examination. The written examination may be followed by an oral component to further verify the student's knowledge.

Aims

The aim of the Vehicle Powertrain course is to provide students with fundamental knowledge of the conceptual design and calculations of the power unit and other parts of the drivetrain. The course is designed to help students understand the interrelationships concerning the design, loading, vibration, and noise of powertrain components, which they can subsequently apply in more specialised courses and, in particular, in engineering practice.

Study aids

The required study materials are available on the e-learning platform for the course Vehicle Powertrains (QHV).

Prerequisites and corequisites

Not applicable.

Basic literature

ACHTENOVÁ, Gabriela; BANĚČEK, Jan a KOLÁŘ, Josef. Převodná ústrojí motorových vozidel: návrh odstupňování převodovek. Praha: České vysoké učení technické v Praze, 2014. ISBN 978-80-01-05557-1. (EN)
BASSHUYSEN, Richard van a SCHÄFER, Fred. Internal combustion engine handbook: basics, components, systems, and perspectives. 2nd rev. ed. Warrendale (PA): SAE International, 2016. ISBN 978-0-7680-8024-7. (EN)
DAVITASHVILI, Nodar a BAKSHALIEV, Valeh. Dynamics of Crank-Piston Mechanisms. Singapore: Springer, 2016. ISBN 978-981-10-0322-6. (EN)
Naftové motory čtyřdobé. 1. díl. 2. vyd. Praha: Státní nakladatelství technické literatury, 1962. (CS)
FISCHER, Robert; KÜÇÜKAY, Ferit; JÜRGENS, Gunter; NAJORK, Rolf a POLLAK, Burkhard. The Automotive Transmission Book. Cham: Springer, 2015. ISBN 978-3-319-05262-5. (EN)
GUZZELLA, Lino a SCIARRETTA, Antonio. Vehicle Propulsion Systems: Introduction to Modeling and Optimization. 3rd ed. Berlin: Springer, 2013. ISBN 978-3-642-35912-5. (EN)
HEISLER, Heinz. Advanced Engine Technology. Oxford: Arnold, 1995. ISBN 1-56091-734-2. (EN)
CHEN, Yong. Automotive Transmissions: Design, Theory and Applications. Singapore: Springer, 2021. ISBN 978-981-15-6702-5. (EN)

Recommended reading

ACHTENOVÁ, Gabriela a KLÍR, Vojtěch. Převodná ústrojí motorových vozidel: kloubové hřídele. 2. vyd. Praha: České vysoké učení technické v Praze, 2018. ISBN 978-80-01-06470-2. (CS)
ACHTENOVÁ, Gabriela a TŮMA, Vlastislav. Vozidla s pohonem všech kol. Praha: BEN – technická literatura, 2009. ISBN 978-80-7300-236-7. (CS)
ACHTENOVÁ, Gabriela. Převodná ústrojí motorových vozidel: diferenciály a děliče momentu. 1. dotisk 1. vyd. Praha: České vysoké učení technické v Praze, 2015. ISBN 978-80-01-04855-9. (CS)
GARRETT, Thomas Kenneth; NEWTON, Kenneth a STEEDS, William. The Motor Vehicle. 13th ed. Oxford: Butterworth-Heinemann, 2001. ISBN 978-0-7506-4449-5. (EN)
STAN, Cornel. Alternative Propulsion for Automobiles. Berlin: Springer, 2017. ISBN 978-3-319-31929-2. (EN)

Classification of course in study plans

  • Programme N-AAE-P Master's 1 year of study, winter semester, compulsory-optional, profile core courses
  • Programme N-ADI-P Master's 1 year of study, winter semester, compulsory-optional, profile core courses

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Syllabus

1) Powertrain mechanisms, crank mechanism kinematics

2) Crank mechanism dynamics, computational models

3) Inertial forces and moments in the crank mechanism and their balancing

4) Balancing of crank mechanisms in in-line and horizontally opposed twin-cylinder engines

5) In-line three-cylinder and four-cylinder engines and balancing of their crank mechanisms

6) Balancing of crank mechanisms in in-line five-cylinder and six-cylinder engines, torque analysis of in-line engines

7) Balancing of crank mechanisms in V-engines

8) Transmission concepts, clutches

9) Manual transmissions

10) Dual-clutch transmissions

11) Automatic transmissions

12) Transmissions for hybrid and electric powertrains

13) Differentials, final drives, all-wheel drive systems

Computer-assisted exercise

26 hours, compulsory

Teacher / Lecturer

Syllabus

1) Application of Matlab software for analytical solutions of powertrain kinematics and dynamics

2) Kinematics and dynamics of the crank mechanism; mass reduction of the connecting rod

3) Vibration of drives with reciprocating engines and its computational modelling

4) Comparison of different modelling approaches and their suitability for specific applications

5) Inertial effects in the crank mechanism and their balancing

6) Engine torque and its numerical Fourier analysis

7) Cam mechanisms

8) Application of Romax Concept software in the conceptual design of transmissions

9) Manual gearboxes and gear-shifting principles

10) Methods of determining gearbox gear ratios

11) Force effects in transmissions

12) Conceptual design of bearings for automotive gearboxes

13) Conceptual design of gears for automotive gearboxes