Course detail

Technological Preparation of Production

FSI-HTVAcad. year: 2026/2027

Methodology of production planning applied in manufacture of engineering components focused on the machining technology. Designing production procedures for machining of typical engineering components. Analysis of technological influence on the manufacturing process. Optimization of a machining manufacturing process.

Language of instruction

Czech

Number of ECTS credits

6

Mode of study

Not applicable.

Guarantor

prof. Ing. Josef Sedlák, Ph.D.

Department

Institute of Manufacturing Technology (ÚST)

Entry knowledge

Technological characteristics of cutting methods, machine tools, cutting tools.

Rules for evaluation and completion of the course

Course unit credit requirements:
-participation in the exercises,
-delivery of assigned papers.
The exam will be written and oral and the resulting classification will be in accordance with Article 12 and 13 of the current BUT Study and Examination Regulations.
It is classificated to the ECTS grading scale.

 

Missed lessons will be compensated in alternative exercises by arrangement with the teacher.
Attendance in lectures is recommended.
Attendance in exercises is compulsory.
The attendance to the seminar is regularly checked and the participation in the lesson is recorded.

Aims

The course will familiarise students with the methodology of designing production procedures for machining of typical engineering components with respect to individual stages of the manufacturing process.

 

Students will be acquainted with an analytical approach applied for solution of the basic problems in designing production procedures applied in manufacturing of engineering components. They will be familiarised with respective technological issues including quantification of the time consumption and economic appraisal..

Study aids

Theses from the lectures. Script Special machining technology.

Prerequisites and corequisites

Not applicable.

Basic literature

KOCMAN, Karel a Jaroslav PROKOP. Technologie obrábění. 1. vydání. Brno: Akademické nakladatelství CERM, s.r.o., 2001, 270 s. ISBN 80-214-1996-2 (CS)
KOCMAN, Karel. Speciální technologie - Obrábění. Brno: Akademické nakladatelství CERM, 2004, 227 s. ISBN 80-214-2562-8. (CS)
VIGNER, A., ZELENKA, A. a M. KRÁL. Metodika projektování výrobních procesů. Praha: SNTL, 1984, 592 s. (CS)
ZEMČÍK, Oskar. Technologická příprava výroby. Brno: Akademické nakladatelství CERM, 2002. 160 s. ISBN 80-214-2219-X. (CS)

Recommended reading

ZEMČÍK, O. Technologická příprava výroby. Přílohy a témata cvičení. Dostupné na CD knihovna FSI a internetu ‹kst.fme.vutbr.cz/obrabeni/publikace/› (CS)
ZEMČÍK, Oskar. Technologická příprava výroby. Brno: Akademické nakladatelství CERM, 2002. 160 s. ISBN 80-214-2219-X. (CS)

Classification of course in study plans

  • Programme N-STG-P Master's

    specialization STM , 2 year of study, winter semester, compulsory
    specialization MTS , 2 year of study, winter semester, compulsory
    specialization STG , 2 year of study, winter semester, compulsory

Type of course unit

 

Lecture

39 hod., optionally

Teacher / Lecturer

prof. Ing. Josef Sedlák, Ph.D.

Syllabus

1. Methodology for designing manufacturing processes for machined components – design of semi-finished products
2. Classification of time consumption and determination of time consumption in engineering production
3. Selection of the optimal machine tool variant
4. Technological aspects of multi-machine operation
5. Methodology for designing manufacturing processes for machined components - machining allowances
6. Technology for manufacturing rotating components - shafts
7. Technology for manufacturing rotating components - flanges, discs, bushings, pins
8. Gear production technology
9. Non-rotating component production technology
10. Preparation of semi-finished products for machining operations
11. Checking the dimensional accuracy of machined surfaces
12. TgPV as an integrated part of the production process
13. Technological design, design and technological standardization

Laboratory exercise

39 hod., compulsory

Teacher / Lecturer

prof. Ing. Josef Sedlák, Ph.D.

Syllabus

1. Design of semi-finished machined parts
2. Standards for unit and batch operation times
3. Presentation
4. Selection of the optimal machine tool variant.
5. Multi-machine operation
6. Presentation
7. Inter-operation allowances for machining
8. Production process for shaft I
9. Production process for shaft II
10. Presentation
11. Production process for spur gear
12. Presentation
13. Credit