Course detail

Technology of Building Operations 1 (E)

FAST-BWB001Acad. year: 2023/2024

The task of the construction engineering is not only to plan the building correctly but also to perform it in high quality and reasonably. The topic of the branch of technology of buildings is the construction execution. The technology deals with methods and procedures of an optimum creation of the building process creation. So that these processes could be modelled, optimised and successfully controlled in technology, time and resource aspects they should be get known at first recognized. The subject includes study of the areas of construction processes related especially with the main construction production. It is lay-out of buildings and built-up structures, principles of technology processes and links, performing of technology stages of earth works, carcass substructure and building facing outer. It deals with technology, space and time structure, sequence, readiness of the working place, mutual links and quality and environmental requirements.

Language of instruction

Czech

Number of ECTS credits

Mode of study

Not applicable.

Guarantor

doc. Ing. Radka Kantová, Ph.D.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Entry knowledge

Basic knowledge of designing and planning of building constructions.

Rules for evaluation and completion of the course

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Aims

·Acquiring of knowledge of selected construction processes, on requirements for their readiness before execution, balance of sources, principles of technology procedures of individual construction processes, their sequence and links, requirements for their quality, safety and environment protection in the course of their realization.
The students will master the objective of the Technology of Building Operations course II, i.e. they will acquire knowledge of selected building processes and their construction readiness, of the needs of the process resources, erection procedure and safety, quality and environmental requirements.

Study aids

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

JURÍČEK, Ivan. Technológia pozemných stavieb. Hrubá stavba. Jaga group, 2001. ISBN 80-88905-29-X (SK)
KOLB Josef. Dřevostavby - Systém nosných konstrukcí, obvodové pláště. Praha: Grada Publishing, 2011. ISBN 978-80-247-4071-3 (CS)
LÍZAL, Petr a kol.. Technologie stavebních procesů pozemních staveb. Úvod do technologie. Hrubá spodní stavba. CERM Brno, 2003. ISBN 80-214-2536-9 (CS)
MARŠÁL, Petr. Stavební stroje. Brno: CERM, 2004. ISBN 80-214-2774-4 (CS)
MOTYČKA, Vít. Technologie stavebních procesů. CERM Brno, 2005.  (CS)
STRAKA Bohumil, NOVOTNÝ Miloslav, KRUPICOVÁ Jana, ŠMAK Milan, VEJPUSTEK Zdeněk. Konstrukce šikmých střech. Praha: Grada Publishing, 2013. ISBN 978-80-247-4205-2 (CS)
ŠTUMPA, Bohumil a ŠEFCŮ, Ondřej. 100 osvědčených stavebních detailů - klempířství a pokrývačství. Praha: Grada Publishing, 2012. SBN 978-80-247-3572-6 (CS)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BPC-SI Bachelor's

    specialization VS , 2 year of study, summer semester, compulsory-optional

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

Ing. Jitka Laura Vlčková, Ph.D.

Syllabus

1. Introduction into the scientific branch of the technology of constructions. Analysis of building processes. Principles of modelling of building processes, process design. 2. Earth work processes. Laying-out of the building, definition of the foundation pit, trenches, wells. Manners and procedures of their execution. Applicable mechanization. 3. Processes of building foundation. Technology principles and procedures at execution of shallow and deep foundations. Manner of anchorage of superstructures into the foundations, quantitative conditions. 4. Concrete structure casings – element, system and special. Principles of design, static assessment and execution. Economic evaluation. 5. Processes of reinforcement of reinforced concrete structures. Preparation of reinforcement, technology lines. Principles of placing of reinforcement into casing, covering of reinforcement by concrete. 6. Concrete mixing processes. Production, haulage, deposit and treatment of fresh concrete. Hardening control, principles of casing removal. Technology breaks. 7. Masonry processes. Principles of execution of walling of bricks, shaped bricks and stone. Principle rules of the walling bonds. Module, technology and quality requirements. Organisational and time structure. 8. Assembly of timber structures and buildings. Execution of classical and new trusses, glued timber structures and their assembly. 9. Timber buildings, principles of production and assembly. Quality requirements. 10. Erection of enclosing shells claddings. Assembly principles and procedures of silicate sandwich, small unit and metal-plastic claddings. 11. Installation of small unit coverings, quality inspection. 12. Execution of roof plumber works incl. metal coverings and on the house facade. Readiness of construction, sequence of processes, fixing and joining, quality requirements. Erection of enclosing roof claddings.

Exercise

13 hod., compulsory

Teacher / Lecturer

Ing. Jitka Laura Vlčková, Ph.D.
Ing. et Ing. Aleš Průcha

Syllabus

1. Introduction to the course content, organizational instructions, individual assignment of projects. Technological directives, volume calculations for the assigned project. 2. Selection of construction machinery for earthwork at the site – machinery set up design, type of performed work of selected machinery. Earthworks - technological regulations, plans of heavy machinery movement throughout the construction site. 3. Foundation works – cross section of a sample formwork, time schedule. 4.–5. Formwork and concreting of ceiling – technological regulations, design of formwork systems for horizontal loadbearing structures of ceilings, technical drawings of the construction site workflow concept. 6. Erection of walls - technological regulations, calculations and itemizing of required materials, time schedule. 7. Evaluation of tasks, defence of proposed solutions, credit.