Course detail
Geodesy III
FAST-GE07Acad. year: 2023/2024
Theoretical principals and application of transformations in plane and space. Special directional measurement - gyroskopic and magnetic measurement. Centering of directions and distances. Principles, Measurement and processing of GPS/GLONASS. Survey of underground line and object, including their location.
Language of instruction
Czech
Number of ECTS credits
5
Mode of study
Not applicable.
Guarantor
Department
Institute of Geodesy (GED)
Entry knowledge
Fundamental knowledge of mathematics, geometry and physics. Knowlendge of basic geodetic measurement and computation.
Rules for evaluation and completion of the course
Extent and forms are specified by guarantor’s regulation updated for every academic year.
Aims
Getting an overview of problems in transformation. Acquaintance with basic principles and methods of measurement and orientation of geodetic networks. Gyroskopic and magnetic measurement. Basic methods of space geodesy.
Student gets overview of transformation, acquaintances with basic principles and methods of measurement and orientation of geodetic networks, gyroskopic and magnetic measurement and basic of space geodesy.
Student gets overview of transformation, acquaintances with basic principles and methods of measurement and orientation of geodetic networks, gyroskopic and magnetic measurement and basic of space geodesy.
Study aids
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Abelovič,J a kol.: Meranie v geodetických sietach. Alfa Bratislava, 1990. (SK)
Heribert Kahmen: Angewandte Geodasie Vermessungs-kunde. Walter de Gruyter and Co., Berlin, 2006. (DE)
James M. Anderson, Edward M. Mikhail: Surveying, Theory and Practice. WCB McGraw - Hill, 1998. (EN)
Nevosád, Z. Vitásek, J. Bureš, J.: Geodézie IV. CERM Brno, 2002. (CS)
Heribert Kahmen: Angewandte Geodasie Vermessungs-kunde. Walter de Gruyter and Co., Berlin, 2006. (DE)
James M. Anderson, Edward M. Mikhail: Surveying, Theory and Practice. WCB McGraw - Hill, 1998. (EN)
Nevosád, Z. Vitásek, J. Bureš, J.: Geodézie IV. CERM Brno, 2002. (CS)
Recommended reading
Fišer Z., Vondrák J.: Mapování II. CERM Brno, s. r. o., 2004. (CS)
Foral J., Kalvoda P., Kratochvíl R., Šváb T., Vondrák J.: Geodetická příručka, část II, výpočty, mapy, katastr nemovitostí, fotogrammetrie, GPS. Ing. Šváb Tomáš - GEFIS, Karafiátova 1313, Valašské Meziříčí, 2008. (CS)
Foral J., Vondrák J.: Geodetická příručka - část I, úhly, délky a výšky. Ing. Tomáš Šváb - GEFIS, Valašské Meziříčí, 2007. (CS)
Ježo J., Sokol Š., Vybíral P.: Geodézia II, Elektronické meranie dľžok. STU v Bratiskave, Stavebná fakulta, 2005. (SK)
Nevosád, Z. Vitásek, J.: Geodézie III. VUTIUM Brno, 2000. (CS)
Nevosád, Z. Vitásek,J.: Geodézie I. CERM Brno, 1999. (CS)
Nevosád.Z: Geodézie VII. VA Brno, 1993. (CS)
Paul R. Wolf, Charles D. Ghilani.: Elementary surveying an introduction to geomatics. Upper Saddle River, NJ : Prentice-Hall, 2002. (EN)
Kratochvíl, Vlatimil. Globální navigační satelitní systémy (GNSS). Modul [GE07-M01]: Brno : Vysoké učení technické, Fakulta stavební, 2012. (CS)
Vitásek,J. Nevosád, Z. Soukup, F.: Geodézie II. VUTIUM Brno, 1999. (CS)
Foral J., Kalvoda P., Kratochvíl R., Šváb T., Vondrák J.: Geodetická příručka, část II, výpočty, mapy, katastr nemovitostí, fotogrammetrie, GPS. Ing. Šváb Tomáš - GEFIS, Karafiátova 1313, Valašské Meziříčí, 2008. (CS)
Foral J., Vondrák J.: Geodetická příručka - část I, úhly, délky a výšky. Ing. Tomáš Šváb - GEFIS, Valašské Meziříčí, 2007. (CS)
Ježo J., Sokol Š., Vybíral P.: Geodézia II, Elektronické meranie dľžok. STU v Bratiskave, Stavebná fakulta, 2005. (SK)
Nevosád, Z. Vitásek, J.: Geodézie III. VUTIUM Brno, 2000. (CS)
Nevosád, Z. Vitásek,J.: Geodézie I. CERM Brno, 1999. (CS)
Nevosád.Z: Geodézie VII. VA Brno, 1993. (CS)
Paul R. Wolf, Charles D. Ghilani.: Elementary surveying an introduction to geomatics. Upper Saddle River, NJ : Prentice-Hall, 2002. (EN)
Kratochvíl, Vlatimil. Globální navigační satelitní systémy (GNSS). Modul [GE07-M01]: Brno : Vysoké učení technické, Fakulta stavební, 2012. (CS)
Vitásek,J. Nevosád, Z. Soukup, F.: Geodézie II. VUTIUM Brno, 1999. (CS)
Classification of course in study plans
Type of course unit
Lecture
26 hod., optionally
Teacher / Lecturer
Syllabus
1. Trigonometric leveling
2. Two-dimensional conformal transformation. Calculation of transformation parameters by LSQ adjustment.
3. Helmert's, affine and projective transformations. Correction transformed coordinates weighted average method
4. Three-dimensional conformal transformation. Rotating matrices. Calculation of transformation parameters by LSQ adjustment.
5. Basics of GNSS - GPS, GLONAS and more.
6. GNSS signals, navigation message correction measurements.
7. Equation of the code and phase measurements. Solution of the autonomous positioning
8. Differential and linear combinations of code and phase measurements - principles and purpose
9.Differential GNSS systems, GNSS Applications
10. Selected methods of orientation - gyro measurements. Conversion of azimuth into bearing.
11. Selected methods of directional orientation - magnetic measurements.
12. Finding the lost points with known coordinates
13. Further development of technologies in geodesy.
Exercise
26 hod., compulsory
Teacher / Lecturer
Syllabus
1. Trigonometric leveling 1.
2. Trigonometric leveling 2.
3. The calculation parameters conformal and Helmert transformation LSQ adjustment
4. The calculation parameters conformal and Helmert transformation LSQ adjustment
5. Equipment for GNSS.
6. Static, rapid static and stop and go method of GPS measuring 1
7. Static, rapid static and stop and go method of GPS measuring 2
8. Processing static and stop and go measurements - 1
9. Processing static and stop and go measurements - 2
10. Real-time measurement
11. Gyroscophics azimuth
12. Finding the lost points with known coordinates
13. Reserve