Course detail

Sensors and Measurement

FIT-SEMAcad. year: 2021/2022

Introduction to mathematical and physical background to measurement methods and technologies. Introduction to relevant circuitry used in measurement. Introduction to accuracy and uncertainty approaches in data evaluation. Technology and methods used in measuring various physical properties. Communication interfaces common to sensors.

Language of instruction

Czech

Number of ECTS credits

Mode of study

Not applicable.

Guarantor

prof. Ing. Martin Drahanský, Ph.D.

Department

Department of Intelligent Systems (UITS)

Learning outcomes of the course unit

The the acquainted knowledge belongs the measurement of physical quantities, how to convert physical quantities to electronic form using sensors and how to transmit, process, and use acquired data. Everything is oriented on intelligent sensors, sensor networks and smart homes.

Prerequisites

Valid schooling of Edict No. 50 (work with electrical devices) is needed.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

  1. Written midterm test.
  2. Participation and active work in laboratories + exercises.
  3. Project (minimum is 3 points).

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

Introduce students via lectures, practical sessions to the field of measurement. Present to students commons electrical circuits, one may encounter while measuring. Demonstrate various approaches to measure chosen physical properties. Introduce students to various interfaces he may use to retrieve data from sensors and approaches to evaluate these data.

Specification of controlled education, way of implementation and compensation for absences

In the case of missed HW laboratories it is possible to replace them until the laboratory is ready for further laboratory practice. Please inform the head of the laboratory or the course supervisor without any delay.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Basic literature

Not applicable.

Recommended reading

BARTUŠEK, Karel, et al. a Miloslav STEINBAUER. Měření v elektrotechnice. 2., přeprac. a dopl. vyd. Brno: VUTIUM, 2010, 212 s.
BEJČEK, L., ČEJKA, M., REZ, J., GESCHEIDTOVÁ, E., STEINBAUER, M. Měření v elektrotechnice. Měření v elektrotechnice. VUT- FEKT, 2002.
ĎAĎO, S. - KREIDL, M. 1996. Senzory a měřicí obvody. 1. vydání. Praha: Vydavatelství ČVUT, 1996. 315 s. ISBN 80-01-02057-6.
FRADEN, Jacob. Handbook of Modern Sensors [online]. Cham: Springer International Publishing, 2016. DOI: 10.1007/978-3-319-19303-8. ISBN 978-3-319-19302-1.
HALLIDAY, David, Robert RESNICK a Jearl WALKER, DUB, Petr, ed. Fyzika. 2., přeprac. vyd. Přeložil Miroslav ČERNÝ. Brno: VUTIUM, c2013. Překlady vysokoškolských učebnic. ISBN 978-80-214-4123-1,.
MUKHOPADHYAY, Subhas Chandra, ed. Next Generation Sensors and Systems [online]. Cham: Springer International Publishing, 2016. Smart Sensors, Measurement and Instrumentation. DOI: 10.1007/978-3-319-21671-3. ISBN 978-3-319-21670-6.
NAWROCKI, Waldemar. Measurement systems and sensors. Second edition. Boston: Artech House, [2016]. Artech House remote sensing library. ISBN 9781608079322.
WEBSTER, John G. a Halit EREN. Measurement, instrumentation, and sensors handbook: electromagnetic, optical, radiation, chemical, and biomedical measurement. Second edition. Boca Raton: CRC Press, Taylor & Francis Group, [2014]. ISBN 9781439848883.
ZEHNULA, K. 1983. Snímače neelektrických veličin. 2. vydání. Praha: Nakladatelství technické literatury, 1983. 371 s.

Classification of course in study plans

  • Programme IT-MSC-2 Master's

    branch MBI , 0 year of study, winter semester, elective
    branch MBS , 0 year of study, winter semester, compulsory-optional
    branch MGM , 0 year of study, winter semester, elective
    branch MIN , 0 year of study, winter semester, compulsory-optional
    branch MIS , 0 year of study, winter semester, elective
    branch MMM , 0 year of study, winter semester, elective
    branch MPV , 0 year of study, winter semester, compulsory-optional
    branch MSK , 1 year of study, winter semester, compulsory-optional

  • Programme MITAI Master's

    specialization NADE , 0 year of study, winter semester, elective
    specialization NBIO , 0 year of study, winter semester, elective
    specialization NCPS , 0 year of study, winter semester, elective
    specialization NEMB , 0 year of study, winter semester, elective
    specialization NGRI , 0 year of study, winter semester, elective
    specialization NHPC , 0 year of study, winter semester, elective
    specialization NIDE , 0 year of study, winter semester, compulsory
    specialization NISD , 0 year of study, winter semester, elective
    specialization NMAL , 0 year of study, winter semester, elective
    specialization NMAT , 0 year of study, winter semester, elective
    specialization NNET , 0 year of study, winter semester, elective
    specialization NSEC , 0 year of study, winter semester, elective
    specialization NSEN , 0 year of study, winter semester, elective
    specialization NSPE , 0 year of study, winter semester, elective
    specialization NVER , 0 year of study, winter semester, elective
    specialization NVIZ , 0 year of study, winter semester, elective
    specialization NISY up to 2020/21 , 0 year of study, winter semester, elective
    specialization NISY , 0 year of study, winter semester, elective

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

prof. Ing. Martin Drahanský, Ph.D.
Ing. Michal Dvořák, Ph.D.
Ing. Vojtěch Mrázek, Ph.D.
Ing. Josef Strnadel, Ph.D.

Syllabus

  1. Selected chapters of physics related to measurement technologies
  2. Common electric circuits in measurement.
  3. Introduction to measurement and metrology.
  4. Sensors.
  5. Measurements of Electrical properties.
  6. Temperature measurements.
  7. Position, velocity and acceleration measurements.
  8. Force, pressure and mass measurements.
  9. Optical measurements and EM radiation measurements.
  10. Other common measurements.
  11. Humidity, surface level and flow measurements.
  12. Communication interfaces.
  13. Application analysis and future trends.

Fundamentals seminar

6 hod., compulsory

Teacher / Lecturer

Ing. Štěpán Rydlo
Ing. Martin Sakin
Ing. Tomáš Goldmann, Ph.D.
Ing. Vojtěch Mrázek, Ph.D.
Ing. Jan Tinka
Ing. Michal Dvořák, Ph.D.
Ing. Lukáš Semerád, Ph.D.

Syllabus

  1. Theoretical calculations - calculating bridge circuit for an application (force measurement, temperature measurement).
  2. Theoretical calculations - calculating accuracy and uncertainty
  3. Theoretical calculations - calculating parameters of electrical components and circuits

Laboratory exercise

6 hod., compulsory

Teacher / Lecturer

Ing. Štěpán Rydlo
Ing. Vojtěch Mrázek, Ph.D.
Ing. Jan Tinka
Ing. Tomáš Goldmann, Ph.D.
Ing. Michal Dvořák, Ph.D.
Ing. Martin Sakin
Ing. Lukáš Semerád, Ph.D.

Syllabus

  1. Sensor design and utilization for measurement.
  2. Complex measurements using existing equipment.
  3. Work with oscilloscope.

Project

14 hod., compulsory

Teacher / Lecturer

Ing. Jan Tinka
Ing. Tomáš Goldmann, Ph.D.
Ing. Michal Dvořák, Ph.D.
Ing. Martin Sakin
Ing. Lukáš Semerád, Ph.D.
Ing. Vojtěch Mrázek, Ph.D.
Ing. Štěpán Rydlo

Syllabus

  1. Processing of a project from the selected part of the course.