Course detail
Reliability and Maintenance of Technical Systems
FSI-XS1Acad. year: 2021/2022
The course is focused on the latest knowledge of reliability and maintenance of technical systems. The student is acquainted with the terminology in reliability and maintenance, with standards and legislation in the field of reliability and also with management of reliability and maintenance. Teaching of the subject is complemented by an exercise where all the topics are properly practiced on examples from industrial practice. There is also a discussion of the results and conclusions in the exercises.
Language of instruction
Czech
Number of ECTS credits
6
Mode of study
Not applicable.
Guarantor
Learning outcomes of the course unit
Students will acquire extensive and comprehensive knowledge of reliability and maintenance of technical systems, which will enable them to engage in industrial engineering and electrical engineering in solving problems related to the issue.
Prerequisites
Knowledge of mathematics and physics at a level of university study. Also, the knowledge of the aforementioned special field in a scope of the previous bachelor study is expected.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
The course is taught through lectures explaining the basic principles and theory of the discipline. Exercises are focused on practical topics presented in lectures.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
Assesment methods and criteria linked to learning outcomes
The course consists of exercises and lectures. Exercise is completed by credit (awarded in the 13th week). To obtain it is required 100% participation in exercises and activity in exercises. Students will work out the individual work in the prescribed range and quality. Based on the quality of the work in the exercise, the student earns up to 30 points for the exam The work must be submitted in writing and checked and recognized by the teacher. The test is realized by written test, student can get up to 70 points from this test, where 30 points from exercises. Evaluation of the test result is given by the ECTS grading scale.
Course curriculum
Not applicable.
Work placements
Not applicable.
Aims
Learning outcomes of the course unit The aim of the course is to gain theoretical and practical knowledge of reliability and maintenance of technical systems.
Specification of controlled education, way of implementation and compensation for absences
The student attendance is checked in tutorials (presence and activity). The 100% participation in tutorials is required, and in case of absence, the student will be obliged to compensate, the alternative attendance will be specified by the lecturer.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
MYKISKA,Antonín. Bezpečnost a spolehlivost technických systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2006,206 s. Učební texty ČVUT v Praze. Fakulta strojní. ISBN 80-01-02868-2. (CS)
NOVÁK,M.; ŠEBESTA,V.; VOTRUBA, Z. Bezpečnost a spolehlivost systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2001, 150 s. Učební texty ČVUT v Praze. Fakulta dopravní. ISBN 80-01-02331-1. (CS)
HOLUB,R.; VINTR,Z. Spolehlivost letadlové techniky (elektronická učebnice). VUT FSI Brno. 2001. 233 s. (CS)
NOVÁK,M.; ŠEBESTA,V.; VOTRUBA, Z. Bezpečnost a spolehlivost systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2001, 150 s. Učební texty ČVUT v Praze. Fakulta dopravní. ISBN 80-01-02331-1. (CS)
HOLUB,R.; VINTR,Z. Spolehlivost letadlové techniky (elektronická učebnice). VUT FSI Brno. 2001. 233 s. (CS)
Recommended reading
MOUBRAY, J. Reliability-Centered Maintenance. A Butterworth-Heinemann Title. 1999. 440 s. ISBN 978-0750633581. (EN)
KARPÍŠEK,Zdeněk. Matematika IV, statistika a pravděpodobnost. 3. doplněné vydání. Akademické nakladatelství CERM, s.r.o., 2007. 170 s. ISBN 978-80-214-3380-9. (CS)
SUMMERVILLE, N. Basic Reliability: An Introduction to Reliability Engineering. AuthorHouse, 2004. 136s. ISBN 978-1418424183. (EN)
LAZZARONI M. Reliability Engineering. Springer Berlin Heidelberg, 2016. 161 s. ISBN 3662507188. (EN)
POCHAMPALLY, K., GUPTA, S. Reliability Analysis with Minitab. Boca Raton: CRC Press, 2016. 1. vydání. 186 s. ISBN 9781498737678. (EN)
RENYAN J. Introduction to Quality and Reliability Engineering. Springer (Springer Series in Reliability Engineering), 2015. 326 s. ISBN 3662472155 (EN)
KARPÍŠEK,Zdeněk. Matematika IV, statistika a pravděpodobnost. 3. doplněné vydání. Akademické nakladatelství CERM, s.r.o., 2007. 170 s. ISBN 978-80-214-3380-9. (CS)
SUMMERVILLE, N. Basic Reliability: An Introduction to Reliability Engineering. AuthorHouse, 2004. 136s. ISBN 978-1418424183. (EN)
LAZZARONI M. Reliability Engineering. Springer Berlin Heidelberg, 2016. 161 s. ISBN 3662507188. (EN)
POCHAMPALLY, K., GUPTA, S. Reliability Analysis with Minitab. Boca Raton: CRC Press, 2016. 1. vydání. 186 s. ISBN 9781498737678. (EN)
RENYAN J. Introduction to Quality and Reliability Engineering. Springer (Springer Series in Reliability Engineering), 2015. 326 s. ISBN 3662472155 (EN)
Elearning
eLearning: currently opened course
Classification of course in study plans
Type of course unit
Lecture
39 hod., optionally
Teacher / Lecturer
Syllabus
1. Quality and reliability, the definition of reliability
2. Terminology and standards in reliability
3. Reliability indicators, reliability prediction analysis, means of increasing reliability
4. Reliability of repaired and non-repaired systems
5. Selected methods of reliability analysis
6. Operational reliability, reliability requirements
7. Reliability and maintenance management
8. Reliability tests, reliability information systems
9. Machine operation, the relationship of operation and maintenance, basic concepts of maintenance theory, standards, and legislation
10. Means of maintenance, Reengineering of maintenance
11. Reliability centered maintenance (RCM), Total Productive Maintenance (TPM)
12. Current trends in maintenance, technical diagnostics, modern approaches in maintenance, Industry 4.0
13. Organization and maintenance management
2. Terminology and standards in reliability
3. Reliability indicators, reliability prediction analysis, means of increasing reliability
4. Reliability of repaired and non-repaired systems
5. Selected methods of reliability analysis
6. Operational reliability, reliability requirements
7. Reliability and maintenance management
8. Reliability tests, reliability information systems
9. Machine operation, the relationship of operation and maintenance, basic concepts of maintenance theory, standards, and legislation
10. Means of maintenance, Reengineering of maintenance
11. Reliability centered maintenance (RCM), Total Productive Maintenance (TPM)
12. Current trends in maintenance, technical diagnostics, modern approaches in maintenance, Industry 4.0
13. Organization and maintenance management
Exercise
27 hod., compulsory
Teacher / Lecturer
Syllabus
1. Mathematical expressions for reliability, availability, maintainability and maintenance assurance
2. Analysis of reliability, analysis of reliability analyzes
3. Reliability analysis, analysis of reliability analyzes
4. Means of increasing reliability
5. Failures of technical systems, ways and consequences of failures
6. Computer support of maintenance management
7. Collection of operational reliability data
8. Completion and evaluation of technical reports (protocols).
9. Credit.
2. Analysis of reliability, analysis of reliability analyzes
3. Reliability analysis, analysis of reliability analyzes
4. Means of increasing reliability
5. Failures of technical systems, ways and consequences of failures
6. Computer support of maintenance management
7. Collection of operational reliability data
8. Completion and evaluation of technical reports (protocols).
9. Credit.
Computer-assisted exercise
12 hod., compulsory
Teacher / Lecturer
Syllabus
1. Maintenance Management Software (Demonstration Options)
2. Software for organization and maintenance management - introduction
3. Software for maintenance organization and management - case study solution
4. RCM maintenance and its analysis - case study solution
2. Software for organization and maintenance management - introduction
3. Software for maintenance organization and management - case study solution
4. RCM maintenance and its analysis - case study solution
Elearning
eLearning: currently opened course