Czech

Not applicable.

In the sense of the below mentioned annotation and curriculum, the student will gain a comprehensive knowledge of the area of machine and equipment maintenance including other machine services, which will be useful for his engagement into solving different issues in industrial machinery and electrotechnical practice related to this area.

The knowledge of mathematics and physics at the level of graduated technical studies is assumed. Basic knowledge of quality management is also welcomed.

Not applicable.

The course includes lectures and tutorials in pre-arranged terms.

For the exam students will study the prescribed issues. They will also elaborate in writing a specific topic from the maintenance area whose defense will be part of the oral exam. Oral examination is held after the defense of a written topic from the area of maintenance in the form of a discussion on the problems according to the course's curriculum.

Not applicable.

Not applicable.

The objective of the course is to gain knowledge in the area of machine and equipment maintenance.

The course is checked according to the student´s participation in pre-arranged tutorials.

Not applicable.

Not applicable.

BLOOM, N . Reliability Centered Maintenance (RCM). 1 vydání USA. McGraw-Hill Companies, 2006. 314 s. ISBN 0-07-158918-X. (EN)
BORRIS, S. Total Productive Maintenance (TPM). 1 vydání USA. McGraw-Hill Companies, 2006. 379 s. ISBN 0-07-158926-0. (EN)
FRADEN, J. Handbook of Modern Sensors. 1. vydání. Springer New York Heiderlberg Dordrecht London, 2010. 653 s. ISBN 978-1-4419-6465-6. (EN)
LEGÁT, Václav a kol. Management a inženýrství údržby. 2. doplněné vyd. Příbram: Kamil Mařík PBtisk, 2016. 622 s. ISBN 978-80-7431-163 -2. (CS)
BEN-DAYA, M., DUFFUAA, S.O., RAOUF, A., KNEZEVIC, J., AIT-KADI, D. Handbook of Maintenance Management and Engineering. 1. vydání. Springer-Verlag London, 2009. 741 s. ISBN 978-1-84882-471-3. (EN)
KREIDL, Marcel a Radislav ŠMÍD. Technická diagnostika. Senzory - metody - analýza signálu. 1. vyd. Praha: BEN - technická literatura, 2006. 408 s. ISBN 80-7300-158-6. (CS)
GRENČÍK, Juraj a kol. Manažérstvo údržby- Synergia a teorie a praxe. 1. vyd. Košice: Slovenská spoločnosť údržby vo vydavateĺstve: BEKI design, s.r.o Košice, 2013. 630 s. ISBN 978-80-89522-03-3. (SK)
PAČAIOVÁ, Hana. Riadenie údržby II. Efektivnosť a bezpečnostˇ v údržbe. 1. vyd. Košice: TU v Košiciach, Strojnícka fakulta, 2011. 112 s. ISBN 987-80-553-0856-2. (SK)
HELEBRANT, František a Jiří ZIEGLER. Technická diagnostika a spolehlivost, II. Vibrodiagnostika. 1. vyd. Ostrava: VŠB – Technická univerzita Ostrava, 2005. 178 s. ISBN 80-248-0650-9. (CS)
MANZINI, R., REGATTIERI, A., PHAM, H., FERRARI, E. Maintenance for Industrial Systems.1. vydání. Springer-Verlag London, 2010. 479 s. ISBN 978-1-84882-574-1. (EN)

GALAR, D., KUMAR, U., SANDBORN, P. Maintenance Costs and Life Cycle Cost Analysis. Boca Raton: CRC Press, 2017. 1. vydání. 516 s. ISBN 9781498769556. (EN)
FRADEN, J. Handbook of Modern Sensors. 1. vydání. Springer New York Heiderlberg Dordrecht London, 2010. 653 s. ISBN 978-1-4419-6465-6. (EN)
MYSHKIN, N. K, MARKOVA, L.V. On-line Condition Monitoring in Industrial Lubrication and Tribology. 227 s. Springer, 2017. ISBN 9783319611341. (EN)
BLOOM, N . Reliability Centered Maintenance (RCM). 1 vydání USA. McGraw-Hill Companies, 2006. 314 s. ISBN 0-07-158918-X. (EN)
MOHANTY A.R. Machinery Condition Monitoring: Principles and Practices. CRC Press, Boca Raton, Florida, USA, 2014. 282 s. ISBN 9781466593053. (EN)
BEN-DAYA, M., DUFFUAA, S.O., RAOUF, A., KNEZEVIC, J., AIT-KADI, D. Handbook of Maintenance Management and Engineering. 1. vydání. Springer-Verlag London, 2009. 741 s. ISBN 978-1-84882-471-3. (EN)
BORRIS, S. Total Productive Maintenance (TPM). 1 vydání USA. McGraw-Hill Companies, 2006. 379 s. ISBN 0-07-158926-0. (EN)
DUFFUAA, S. O., RAOUF, A. Planning and Control of Maintenance Systems. Modelling a Analysis. 2. vydání. Springer International Publishing AG, Switzerland, 2016. 348 s. ISBN 9783319371818. (EN)

20 hours, optionally

1. Machine and equipment operation. Life phases. Maintenance. Failures. Causes, origin and development of failures. Failure mechanism and their external symptoms. Failure classification according to the nature of their origin. Types of machinery wearing.
2. Machine and equipment conditions. Technical diagnostics - diagnosis, prognosis, genesis. Diagnostic tools. Off-line (walking) and on-line diagnostics, monitoring, condition monitoring, diagnostic models, diagnostic systems, diagnostic signals - analyses and processing.
3. Sensors, sensor parameters, sensors of mechanical quantities . Sensors of mechanical vibration, sensors of mechanical tension (tensometers), pressure gauges, fluid flowmeters, level gauges, temperature sensors, electrical, magnetic and chemical sensors. Smart sensors.
4. Vibrodiagnostics, electrical diagnostics, thermal diagnostics, tribodiagnostics, noise diagnostics, acoustic emissions, flow and level diagnostics, pressure diagnostics. Non-destructive material testing. Multi-parametric diagnostics. Remote machine diagnostics.
5. Data acquisition from machine and equipment diagnostics, assessment methods. Control diagrams as the tools of statistical process control (SPC). Statistical data analysis, data mining. Recognition of technical diagnostics, statistical methods for classification, clustering, neural networks, diagnostic expert systems, fuzzy systems. Machinery wearing indication, diagnostic monitoring systems, vizualization of diagnostic systems. Technical diagnostics within Industry 4.0 initiative.
6. Preventive maintenance with pre-defined intervals, maintenance according to technical conditions - predictive, pro-active, and testing. Preventive maintenance optimization. System creation and management of preventive, predictive and pro-active maintenance.
7. Maintenance management and engineering – maintenance organization and management in a company (strategy, outsourcing, legislation, planning, schedule, material sources, spare parts, overhauls, and re-engineering), maintenance productivity assessment economics (finance, key indicators, benchmarking), maintenance quality management, (normalized management system, documentation and audit), environmental maintenance management.
8. Maintenance focused on failure free operation - RCM (Reliability Centred Maintenance). Other methods.
9. Total productive maintenance - TPM.
10. Software for maintenance: planning, maintenance management and agenda, management and maintenance of tangible asset and life control, stock holding. Maintenance visualization. Relationship of maintenance, maintenance management and company´s management. Maintenance 4.0 and Industry 4.