Course detail
Automatic Control of Machines
FSI-GASAcad. year: 2020/2021
The course familiarises students with automation and control devices for production machines. This information is useful for the design and programming of automatic production machines and manufacturing systems. The course deals with theoretical principles of automatic control, mechanical control, electrical control, numerical control, sensors and effectors.
Language of instruction
Czech
Number of ECTS credits
5
Mode of study
Not applicable.
Guarantor
Learning outcomes of the course unit
Students will be made familiar with elements for automation of production machines and other manufacturing equipment, with methods necessary for control of production machines and manufacturing systems. They will be able to apply this knowledge to the design and development of manufacturing systems and their parts. They will gain practical experience with computer aided technologies used for the design, programming and for simulation of production machine control.
Prerequisites
Students are expected to have: - basic knowledge of physics in area of electrostatics and electromagnetism, – computer literacy, - knowledge of basic principles of manufacturing systems, requirements for their functionality.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
The course is taught through lectures explaining the basic principles and theory of the discipline. Teaching is suplemented by practical laboratory work.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
Assesment methods and criteria linked to learning outcomes
Course-unit credit is conditional on the following: Participation in practicals and working out of semester work. Examination: The exam has a written and an oral part. Final grade reflects student’s knowledge acquired in the course and his/her ability to apply this knowledge to the practical problems solution.
Course curriculum
Not applicable.
Work placements
Not applicable.
Aims
The aim of the course is to provide students with basic knowledge of HW and SW of control systems for machine tools and manufacturing systems and their practical use focusing on the use in Industry 4.0. The basic terms for this area are defined and analysed. Also discussed are the control systems and their parts as an important part of the design and development of manufacturing equipment. Students will also learn about the basics of the use of sensors in the field of control of production machines and systems.
Specification of controlled education, way of implementation and compensation for absences
Attendance at practise lessons is obligatory and it is checked. Only substantial reasons of absence are accepted. Missed lessons can be substituted for via solution of extra exercises.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Beckhoff Information System [online]. Germany: Beckhoff Automation GmbH & Co., 2019 [cit. 2019-09-14]. Dostupné z: https://infosys.beckhoff.com/index_en.htm (EN)
ČSN EN 61131-3 ed. 2 Programovatelné řídicí jednotky - Část 3: Programovací jazyky, 2013. Ed.2. Praha: Úřad pro technickou normalizaci, metrologii a státní zkušebnictví. (CS)
MARTINEK, Radislav, 2004. Senzory v průmyslové praxi. Praha: BEN - technická literatura. ISBN 80-7300-114-4. (CS)
Sensors, networking and control systems - ifm electronic [online]. Praha: ifm electronic, spol. s r.o., 2019 [cit. 2019-09-14]. Dostupné z: https://www.ifm.com/ifmcz/web/home.htm (CS)
S7-1200 - Industry Support Siemens [online]. Munich: Siemens Aktiengesellschaft, 2019 [cit. 2019-09-14]. Dostupné z: https://support.industry.siemens.com/cs/products?mfn=ps&pnid=13683&lc=en-CZ (EN)
ŠMEJKAL, Ladislav. PLC a automatizace. Praha: BEN - technická literatura, 2005. ISBN 80-730-0087-3. (CS)
The TIA Portal Tutorial Center (videos) - ID- 106656707 - Industry Support Siemens. Industry Support Siemens [online]. Munich: Siemens, 2019 [cit. 2019-09-14]. Dostupné z: https://support.industry.siemens.com/cs/document/106656707/the-tia-portal-tutorial-center-(videos)?dti=0&lc=en-WW (EN)
ČSN EN 61131-3 ed. 2 Programovatelné řídicí jednotky - Část 3: Programovací jazyky, 2013. Ed.2. Praha: Úřad pro technickou normalizaci, metrologii a státní zkušebnictví. (CS)
MARTINEK, Radislav, 2004. Senzory v průmyslové praxi. Praha: BEN - technická literatura. ISBN 80-7300-114-4. (CS)
Sensors, networking and control systems - ifm electronic [online]. Praha: ifm electronic, spol. s r.o., 2019 [cit. 2019-09-14]. Dostupné z: https://www.ifm.com/ifmcz/web/home.htm (CS)
S7-1200 - Industry Support Siemens [online]. Munich: Siemens Aktiengesellschaft, 2019 [cit. 2019-09-14]. Dostupné z: https://support.industry.siemens.com/cs/products?mfn=ps&pnid=13683&lc=en-CZ (EN)
ŠMEJKAL, Ladislav. PLC a automatizace. Praha: BEN - technická literatura, 2005. ISBN 80-730-0087-3. (CS)
The TIA Portal Tutorial Center (videos) - ID- 106656707 - Industry Support Siemens. Industry Support Siemens [online]. Munich: Siemens, 2019 [cit. 2019-09-14]. Dostupné z: https://support.industry.siemens.com/cs/document/106656707/the-tia-portal-tutorial-center-(videos)?dti=0&lc=en-WW (EN)
Recommended reading
BOLTON, William. Instrumentation and Control Systems (Second Edition). Second Edition. Kidlington: Newnes, 2015. ISBN 978-0-08-100613-9.
(EN)
Elearning
eLearning: currently opened course
Classification of course in study plans
Type of course unit
Lecture
26 hod., optionally
Teacher / Lecturer
Syllabus
1. Introduction, subject and sources of automatic control, defining basic terms.
2. Position of an automatic control in design of manufacturing machines and systems.
3. Basic algorithm of LD (Ladder diagram) language.
The elements of types Contact, Coil inside programming language LD.
4. The elements of types Counter, Timer inside programming language LD.
5. Description of algorithm using flowchart. Basic algorithm of SFC (Structured function chart) language.
6. Elements of types STEP and
Transaction inside programming. Element types Loop, Select Diverge and Parallel Diverge.
7. Programmable logic controller (PLC) - hardware.
8. Programmable logic controller (PLC) - software.
9.-12. Sensors – classification, characteristic properties.
13. Communication issues in the control of production machines and systems.
2. Position of an automatic control in design of manufacturing machines and systems.
3. Basic algorithm of LD (Ladder diagram) language.
The elements of types Contact, Coil inside programming language LD.
4. The elements of types Counter, Timer inside programming language LD.
5. Description of algorithm using flowchart. Basic algorithm of SFC (Structured function chart) language.
6. Elements of types STEP and
Transaction inside programming. Element types Loop, Select Diverge and Parallel Diverge.
7. Programmable logic controller (PLC) - hardware.
8. Programmable logic controller (PLC) - software.
9.-12. Sensors – classification, characteristic properties.
13. Communication issues in the control of production machines and systems.
Laboratory exercise
26 hod., compulsory
Teacher / Lecturer
Syllabus
1-2. Influence of automatic control on the manufacturing machines design, their working properties and service.
3-4. Specification of machine components for further own work.
5-10. Proposal of a control system and a control algorithm, object description for controlled and controlling systems. Realisation of a control program.
11-12. Simulation of a control process, solution verification, debugging.
13. Presentation of a solution and evaluation.
3-4. Specification of machine components for further own work.
5-10. Proposal of a control system and a control algorithm, object description for controlled and controlling systems. Realisation of a control program.
11-12. Simulation of a control process, solution verification, debugging.
13. Presentation of a solution and evaluation.
Elearning
eLearning: currently opened course