Course detail
Computer Aided Building Physics Application
FAST-NHB041Acad. year: 2020/2021
Real recovery software for Building Physics in the design and construction assessment in accordance with applicable legislation.
In particular, the assessment of structures in terms of thermal and acoustic techniques
Verification of thermal comfort, sound and light microclimate of buildings.
The calculation and design is to optimize the structural design of the building envelope and the doors and windows, including the resolution of structural details.
Language of instruction
Czech
Number of ECTS credits
3
Mode of study
Not applicable.
Guarantor
Department
Institute of Building Structures (PST)
Offered to foreign students
Of all faculties
Learning outcomes of the course unit
By attending the course the students will learn how to properly design building structures by eliminating the sources of failures and defects with the means of computer simulation programs. They will be taught how to design buildings with low-energy demands meeting the thermal indoor comfort conditions, together with the correct utilization of solar gains through openings which also satisfy the requirements given by the standards and regulations of daylighting design.
Prerequisites
Theoretical knowledge from the area of thermal physics and daylighting of building including computational procedures. Knowledge of material properties and designs of structure details. Basic knowledge of valid legislation.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
Not applicable.
Assesment methods and criteria linked to learning outcomes
Not applicable.
Course curriculum
1. Functional requirements for thermal protection of buildings, energy legislation.
2. Practical use of software for building heat engineering solution of one-dimensional temperature field for the unsteady state.
3.–4. Modelling and assessment of selected detail using a two-dimensional temperature field.
5.–6. Thermal stability of a room – a critical assessment of the room in terms of maximal increase of temperature and a maximum temperature of a room in summer.
7. Functional requirements of the day and insolation of buildings.
8. Rating daylight factor.
9. Structural and energetic properties of the building, the heat transfer through the building envelope.
10. Energy performance of buildings.
11. Functional requirements for acoustics.
12. Rating insulation separating structures.
13. Verifying the suitability of design of structures including doors and windows in terms of building physics (overall concept of the building and individual design – optimization requirements in terms of thermal physics, acoustics, daylighting and insolation of buildings).
2. Practical use of software for building heat engineering solution of one-dimensional temperature field for the unsteady state.
3.–4. Modelling and assessment of selected detail using a two-dimensional temperature field.
5.–6. Thermal stability of a room – a critical assessment of the room in terms of maximal increase of temperature and a maximum temperature of a room in summer.
7. Functional requirements of the day and insolation of buildings.
8. Rating daylight factor.
9. Structural and energetic properties of the building, the heat transfer through the building envelope.
10. Energy performance of buildings.
11. Functional requirements for acoustics.
12. Rating insulation separating structures.
13. Verifying the suitability of design of structures including doors and windows in terms of building physics (overall concept of the building and individual design – optimization requirements in terms of thermal physics, acoustics, daylighting and insolation of buildings).
Work placements
Not applicable.
Aims
Students will gain skills that permit a deeper understanding of multimedia issues in terms of construction design, thermal fault elimination and ensuring low energy consumption of buildings. A part of the course will be an optimisation of void infill elements from a point of view of thermal comfort of a room, interior daylighting and insolation.
Specification of controlled education, way of implementation and compensation for absences
Extent and forms are specified by guarantor’s regulation updated for every academic year.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Not applicable.
Recommended reading
Not applicable.
Classification of course in study plans
Type of course unit
Lecture
13 hod., optionally
Teacher / Lecturer
Syllabus
1. Functional requirements for thermal protection of buildings, energy legislation.
2. Practical use of software for building heat engineering solution of one-dimensional temperature field for the unsteady state.
3.–4. Modelling and assessment of selected detail using a two-dimensional temperature field.
5.–6. Thermal stability of a room – a critical assessment of the room in terms of maximal increase of temperature and a maximum temperature of a room in summer.
7. Functional requirements of the day and insolation of buildings.
8. Rating daylight factor.
9. Structural and energetic properties of the building, the heat transfer through the building envelope.
10. Energy performance of buildings.
11. Functional requirements for acoustics.
12. Rating insulation separating structures.
13. Verifying the suitability of design of structures including doors and windows in terms of building physics (overall concept of the building and individual design – optimization requirements in terms of thermal physics, acoustics, daylighting and insolation of buildings).
Exercise
26 hod., compulsory
Teacher / Lecturer
Syllabus
1. Programs, legislation, award - undergraduate project, conditions for credits, requirements in CSN
2. Heat transfer coefficient, together with a thermal bridge, balance condensation and evaporation of water vapor with consideration of the actual effectiveness of the vapor layer, drop touch the floor temperature.
3.–4. Solution selected details (min. 2 details) using a two-dimensional temperature field.
5.–6. Assessment of the critical rooms for thermal stability in winter and summer.
7.–8. Assessment of daylight factor (required continuity of the summer thermal stability). Optimizing the window size so as to meet the requirements in terms of thermal stability and daylight factor.
9. The transmission of heat through the building envelope, the average heat transfer coefficient, the label of the building envelope.
10.–11. Evaluation of energy performance according to the current legislation.
12. Assessment of internal partition structures in terms of airborne and impact sound insulation.
13. Credits.