Course detail

Members of Concrete Structures

FAST-BLA001Acad. year: 2020/2021

Concrete members. Structural characteristic of concrete. Concrete reinforcement and its bond with concrete. Basic principles of design. Durability of concrete structures.
Design of reinforced concrete members for bending and shear force - ultimate and serviceability limit states, detailing. Design of reinforced concrete members for axial force and bending moment. Principles of concrete members design subject to other effect of the load. Design of members from plain and lightly reinforced concrete.
Simple concrete members – one way reinforced slabs, beams, girders, lintels, cantilevered structures, columns and stairs.

Language of instruction

Czech

Number of ECTS credits

Mode of study

Not applicable.

Guarantor

doc. Ing. Ivana Laníková, Ph.D.

Department

Institute of Concrete and Masonry Structures (BZK)

Learning outcomes of the course unit

A student gains these knowledge and skills:
• Knowledge of the principles of reinforced concrete cross-section dimensioning for general stresses.
• Virtue for designing reinforced concrete members and simple structures together with the ability of preparing relevant technical drawings.

Prerequisites

technical mathematics, technical physics, structural mechanics, theory of elasticity, loads, basic principles of structures design

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1. Concrete members. Components of concrete. Structural properties of concrete and influencing factors.
2. Types of concrete and reinforcement, their interaction. Theory of concrete structures design – load, structural requirements, design assumptions, durability. Ultimate limit states – principle of design.
3. Analysis of reinforced concrete bending members. Design of cross-sections for bending – general and simplified method.
4. Design of cross-sections for bending – rectangular sections, general sections, sections subject to biaxial bending moment .
5.–6. Design of cross-sections for shearing force.
7. Curtailment of reinforcement in beam – detailing and arrangements. Reinforcement of bended structural members.
8. Principles of design and reinforcement of stairs.
9.–10. Design of sections subjected to axial load and bending.
11. Design of sections for torsion moment. Design of members from plain and lightly reinforced concrete.
12. Verification of serviceability limit state of flexural members. Time-dependent properties of concrete.

Work placements

Not applicable.

Aims

To teach the students to the principles of reinforced concrete cross-section dimensioning at the principal stresses.
To gain ability for design of reinforced concrete members and simple structures together with preparing relevant technical drawings.

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BPC-SI Bachelor's

    specialization VS , 2 year of study, summer semester, compulsory

  • Programme BPC-MI Bachelor's 2 year of study, summer semester, compulsory
  • Programme BPA-SI Bachelor's 2 year of study, summer semester, compulsory
  • Programme BKC-SI Bachelor's 2 year of study, summer semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Ivana Laníková, Ph.D.

Syllabus

1. Concrete members. Components of concrete. Structural properties of concrete and influencing factors. 2. Types of concrete and reinforcement, their interaction. Theory of concrete structures design – load, structural requirements, design assumptions, durability. Ultimate limit states – principle of design. 3. Analysis of reinforced concrete bending members. Design of cross-sections for bending – general and simplified method. 4. Design of cross-sections for bending – rectangular sections, general sections, sections subject to biaxial bending moment . 5.–6. Design of cross-sections for shearing force. 7. Curtailment of reinforcement in beam – detailing and arrangements. Reinforcement of bended structural members. 8. Principles of design and reinforcement of stairs. 9.–10. Design of sections subjected to axial load and bending. 11. Design of sections for torsion moment. Design of members from plain and lightly reinforced concrete. 12. Verification of serviceability limit state of flexural members. Time-dependent properties of concrete.

Exercise

26 hod., compulsory

Teacher / Lecturer

doc. Ing. Ivana Laníková, Ph.D.

Syllabus

1. The load and its determination, combination and effects. Idealisation of basic structural members. Design of monolithic reinforced concrete structure – project: Definition of task, preliminary design of dimensions, analysis of structural solution and static system, scheme of shape of structure. 2. Basic materials of reinforced concrete, interaction of concrete and reinforcement, durability of concrete members. 3. Bended members, design and review of the slabs: single supported floor slab – load, action of load and combinations, design for bending and shear, transverse reinforcement, anchorage of reinforcement, modification of reinforcement in the areas of partial fixation, scheme of reinforcement. 4. Design and review of slabs: continuous floor slab – load, action of forces (redistribution of forces) and combinations, design for bending, scheme of reinforcement. 5. Design and review of beam with the T cross-section - load, action and combination, design for bending (T-section, comparison with rectangular cross-section). 6. Member of general cross-section subject to bending – general method, application on cantilever beam (example). 7. Correction. 8. Beam with the T cross-section – design for shear, shear between web and flanges of T cross-section, curtailment of reinforcement. 9. Design and review of a lintel - load, action and comcination, design for bendding, shear, direct and indirect supporting of beam, scheme of reinforcement. Reinforcement of ring beams. Drawings of reinforcement of designed members. 10. Vertical framed concrete structures: RC column subjected to bending and axial force – load, action of load, verification of load-bearing capacity via interactive diagram (example). 11. Correction. 12. Submit of the project. Credit.