Course detail

Printed Circuits and Surface Mount Technology

FEKT-KPSMAcad. year: 2018/2019

Subject deals with topics of printed circuit board (PCB) production and assembly process from the components and used chemistry at the entrance of the process to the repairs and quality requirements at the assembly process exit. Subject deals with basic materials for production of printed circuit boards (PCB), their properties, application and comparison with inorganic substrates, technology procedures of single-, double- and multi-layer PCBs production, new technology trends of PCB production, surface mount technology (SMT), throuh hole technology (THT) and combined mounting of electronic parts and quality requirements of placement and soldering.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Learning outcomes of the course unit

The student will be able to orientate in production of asembled and non assembled PCB
 define basic terminology from PCB
 describe and explain differences in basic materials - organic, inorganic - composition, properties and application
 prove knowledges from subtractive technique of PCB production . Name and explain partial production steps of single, double and multilayer PCB
 is able after received knowledges operate with PADS PCB design system, later is able to design simple PCB in PADS
 prove to explain technology procedures from throuh hole technology (THT), surface mount technology (SMT) and mixed technology
 prove to explain flux, solder paste, adhesive and solder alloy functions
 master soldering and cleaning of PCB problematics, is able to disscuss questions of til/lead and lead free techniques
 able to apply received knowledges in real production PCB technology analysis, prove to disscuss partial steps
 master reflow soldering temperature profile measuring and evaluation
 prove to interprete quality requirements for assembly and soldering according to international standards IPC A 610 rev. D , E
 able practically place and solder PCB with surface mounted devices (SMD), master principles and technique of repair of TH and SM devices, manual assembly and deassembly
 master basic english terminology from PCB production and from PCB assembly

Prerequisites

The subject knowledge on the secondary school education level is required.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teachning methods include lectures, practical laboratories and excursions.Lectures are based on Power Point presentation with videos. Education is guided with practically oriented questions especially in laboratories that are oriented to topics for practical application Course is taking advantage of e-learning (Moodle) system. Students have to write a single project/assignment during the course.

Assesment methods and criteria linked to learning outcomes

Evaluation of laboratory works - max 25 points, test 1st - max 10 points, test 2nd - max 15 points, final written examination - max 40 points, oral final examination - max 10 points. Written and oral part of final examination are duty. Progress to oral part of final examination is only after receiving min 15 points from written part of final examination. Oral part of final examination is passed with min 4 points.
Examination is oriented to evaluation of received knowledges from printed circuit board (PCB) production and surface mount technology (SMT) topics and in practical orientation in technology analysis of real assembled PCB. Student in this analysis demonstrates ability to choose conforming technology procedure of components assembly and of PCB description incl. applied PCB surface treatments.
Requirements for completion of a course are specified by a regulation issued by the lecturer responsible for the course and updated for every year.

Course curriculum

1. Base materials for Printed Circuit Boards (PCBś) production, organic, inorganic, reinforcements, resins, copper clad materials. Base materials organic rigid, flexible, rigid/flexible, semiflexible. Properties: electrical, mechanical, thermal, chemical. Standard ČSN EN 61249 – xx – xx.
2. Organic base materials, properties. Base materials inorganic, comparison with organic. Requirements for base materials, latest trends and development in base materials area. MID.
3. Interconnection structures, types. Subtractive, semiaditive and aditive methods of production interconnecton structures. PCBś production - main orientation. Base steps in PCBś production. Technology procedure of single, double and multilayer PCB.
4. Interconnection structures with microvia, SBU methods. PCBś assembly - through hole technology (THT) and surface mount technology (SMT), mixed. Technology procedures. Latest trends in SMT.
5. Surface moun devices (SMDś), packages, properties, type of leads, IC packages, passive components, elektromechanical devices, BGA packages, construction.
6. "Chemistry in assembly" and correct application in process /solder paste, solder alloy, adhesive, conformal coating, packaging material/
7. Semi semester test (10 questions/9 minutes). Application techniques /screen printing, stencil printing, dispensing/. Stencils, screens - preparation. Basic for quality in printing, factors.
8. Optical inspection after printing (SPI). Placement of SMDś, pick and place machines, methods of centering components.
9. Soldering, solder joint, requirements for solder joint. Soldered joint vs. welded joint vs. joint realised with adhesive - comparison. Methods of soldering. Requirements for quality of placement and soldering acc. to IPC A 610 rev. D.
10. Solder joint reliability. Lead free vs. lead soldering. Thermal management of PCB. Temperature profile measurememts.
11. Wave soldering (mass), nitrogen atmosphere infuence. Manual soldering, principles, soldering tips maintenance. Reflow soldering, methods, forced convection and nitrogen atmosphere influence.
12. Testing of assembled and non-assembled PCBś. Quality control, methods. Automatic Optical Inspection (AOI). Statistical tools for quality testing and improvement.
13. Rework and repairs of PCBś. Contact and hot air/nitrogen method of deassembly and asembly components. Principles and techniques of repairs. Requirements for PCBś quality acc. to IPC and European standards.

Work placements

Not applicable.

Aims

The aim of the subject is to make students familiar with the printed circuit boards (PCB) production. Initiate them into the material and technology questions of components assembly, which are available at present time. Main focus is in surface mount technology (SMT).

Specification of controlled education, way of implementation and compensation for absences

The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course and updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme EEKR-BK Bachelor's

    branch BK-MET , 2. year of study, summer semester, compulsory

  • Programme EEKR-CZV lifelong learning

    branch ET-CZV , 1. year of study, summer semester, compulsory

Type of course unit

 

Lecture

26 hours, optionally

Teacher / Lecturer

Syllabus

Basic organic materials, kinds of bonding agent stiffeners, plated basic materials. Solid and flexible basic organic materials.
Basic organic materials, electrical, mechanical and also heat properties. Basic inorganic materials and comparison with organic materials.
Principles of PCB design, form and size of soldering spots and conductive paths. Principles of design for wave soldering and soldering by remelting.
Principles of PCB design, design of non-soldering mask, design of soldering spots for BGA and CSP, examples of footprints for SMT
Mounting and interconnecting structures, kinds. Subtractive, semiadditive and additive methods of production of mounting and interconnecting structures. Major application trends in electrotechnics.
Technological procedures of production of single-layer, double-layer and multi-layer PCB. Microinterconnecting (microvia) structures, MID. Separate operations of production process.
Assembly, surface and combined mount of PCB. Technological procedures. New trends in SMT.
Chemistry in mounting process and its correct choice (soldering paste, soldering alloys, adhesives, fluxing agents conformal coatings, packaging materials)
Application technologies (screen process printing, stencil printing, dispension). Process of SMD population, populating automatic machines, principles, methods of component centering .
SMD, properties and execution, outlets of parts, packages for IO, passive parts, electromechanical elements, BGA packages, design.
Soldering, methods of soldering, soldered connection and reliability of soldered connection. Machine soldering by wave, influence of nitrogen protective atmosphere. Manual soldering, principles.
Reflow soldering, methods, forced convection and influence of nitrogen atmosphere. Measurement of temperature profiles. Testing of non-populated and populated DPS, quality checking, checking methods.
Repairs of DPS, contact and contactless methods of assembly/disassembly. Principles and technique of repairs. Requirements on DPS according to IPC and Czech standards, antistatic prevention.

Exercise in computer lab

4 hours, compulsory

Teacher / Lecturer

Syllabus

Design system - basic rules
Design system and technological outputs

Laboratory exercise

18 hours, compulsory

Teacher / Lecturer

Syllabus

Organic basic materials, properties. Principles of choice of material.
Production of single-layer and double-layer PCB on the line BUNGARD/PROTOCAD.
Soldering paste, adhesives, fluxing agents. Properties and distribution Technical and safety sheets, manipulation and storing, principles.
Screen process printing/template printing. Screens, templates, properties. Printing of soldering paste. Factors influencing quality of print, defects and their reasons.
Semiautomatic population of SMD, creating program. Dispension of adhesive. Population of SMD into soldering paste. Mounting procedures, discussion.
Reflow soldering with solder paste, measuring of temperature profiles and principles. Defects of soldered joints. Test of the solder paste for solder balling.
Repairs of assembly units by contact method/hot air. Assembly/disassembly of chips (0805, 1206), SOIC, QFP.
Requirements for population and soldering of SMD. Checking quality of assembly unit according to IPC-A-610B.

The other activities

4 hours, compulsory

Teacher / Lecturer

Syllabus

Excursion to PCB mounting plant
Excursion to PCB production plant.