Course detail
Measurement Technique
FSI-XMT-KAcad. year: 2016/2017
The course introduces the students to the principles of computer-supported measurement systems. Possible errors in measurements performed by these systems, their corrections and methods of interpretation of the obtained data are explained.
Language of instruction
Czech
Number of ECTS credits
5
Mode of study
Not applicable.
Learning outcomes of the course unit
After the course, the students are able to design simple measurement systems made of standard components, for example for measurements of length, temperature, location etc., to evaluate the obtained data and to analyze the possible faults of the measurement chain.
Prerequisites
Students are expected to have basic knowledge of metrology, electrotechnics and PC skills.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
The course is taught through lectures explaining the basic principles and theory of the discipline. Teaching is suplemented by practical laboratory work.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.
Assesment methods and criteria linked to learning outcomes
Course-unit credit is conditioned by 100% attendance at laboratory practicals and approved reports. Examination has a written and an oral part and tests student’s knowledge and his/her ability to apply it in practice.
Course curriculum
Not applicable.
Work placements
Not applicable.
Aims
The objective of the course is to introduce the students to the computer-supported measurement systems.
Specification of controlled education, way of implementation and compensation for absences
Seminars are compulsory, attendance is monitored. Absence can be compensated on agreement with the teacher.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Bernstein: PC Messlabor. Franzis Verlag 1998 ISBN 3-7723-5733-4
Hofmann, D., Handbuch Messtechnik und Qualitatssicherung : Berlin : Verlag Technik 1986.
Hofmann: Priemyselná meracia technika. ALFA Bratislava 1988 ISBN 80-05-00139-8
Krsek,Osanna, Kuric, Prostrednik: Strojárska metrológia a riadenie kvality, STU Bratislava 2002 ISBN 80-227-1789-4
Profos, Pfeifer: Handbuch der industriellen Messtechnik. Oldenbourg München, 1994, ISBN 3-486-22592-8
Team authors, The Measurement, Instrumentation and Sensors Handbook : Boca Raton: CRC Press LLC, 1999.
Hofmann, D., Handbuch Messtechnik und Qualitatssicherung : Berlin : Verlag Technik 1986.
Hofmann: Priemyselná meracia technika. ALFA Bratislava 1988 ISBN 80-05-00139-8
Krsek,Osanna, Kuric, Prostrednik: Strojárska metrológia a riadenie kvality, STU Bratislava 2002 ISBN 80-227-1789-4
Profos, Pfeifer: Handbuch der industriellen Messtechnik. Oldenbourg München, 1994, ISBN 3-486-22592-8
Team authors, The Measurement, Instrumentation and Sensors Handbook : Boca Raton: CRC Press LLC, 1999.
Recommended reading
Daďo, S., Kreidl, M. Senzory a měřicí obvody : Praha : Vydavatelství ČVUT v Praze 1996.
Chudý, V., Palenčár, R., Kureková, E., Halaj, M., Meranie technických veličín : Bratislava : Vydavatelstvo STU v Bratislave 1999.
Jenčík, J., Volf, J. Technická měření : Praha : Vydavatelství ČVUT v Praze 2000.
Jenčík,J., Kuhn,L., Technická měření ve strojnictví :Praha : SNTL 1982.
Sládek, Z., Vdoleček, F., Technická měření : Brno : Nakladatelství VUT v Brně 1992.
Chudý, V., Palenčár, R., Kureková, E., Halaj, M., Meranie technických veličín : Bratislava : Vydavatelstvo STU v Bratislave 1999.
Jenčík, J., Volf, J. Technická měření : Praha : Vydavatelství ČVUT v Praze 2000.
Jenčík,J., Kuhn,L., Technická měření ve strojnictví :Praha : SNTL 1982.
Sládek, Z., Vdoleček, F., Technická měření : Brno : Nakladatelství VUT v Brně 1992.
Classification of course in study plans
Type of course unit
Guided consultation
9 hod., optionally
Teacher / Lecturer
Syllabus
1. Principle of computer-aided measuring system
2. Typical analog and digital sensors
3. Principle of A/D and D/A converter, mistakes of conversion
4. Sampling, mistakes in sampling, filter
5. Graphical systems for on-line processing of measured data (LabView)
6. Analysis of the obtained data (statistical processing)
7. Analysis of the obtained data (frequency analysis, digital filtration)
8. Possible measuring mistakes in computer-aided measuring systems
9. Measuring mistakes and their corrections
10. Structures of measuring systems
11. Measuring systems properties
12. FMEA analysis - a tool for identification of potential mistakes in the measurement chain
13. Principle of tunnel scanning microscope and microscope of atomic forces
2. Typical analog and digital sensors
3. Principle of A/D and D/A converter, mistakes of conversion
4. Sampling, mistakes in sampling, filter
5. Graphical systems for on-line processing of measured data (LabView)
6. Analysis of the obtained data (statistical processing)
7. Analysis of the obtained data (frequency analysis, digital filtration)
8. Possible measuring mistakes in computer-aided measuring systems
9. Measuring mistakes and their corrections
10. Structures of measuring systems
11. Measuring systems properties
12. FMEA analysis - a tool for identification of potential mistakes in the measurement chain
13. Principle of tunnel scanning microscope and microscope of atomic forces
Laboratory exercise
9 hod., compulsory
Teacher / Lecturer
Syllabus
C1.Determination of a precision correction table of the tool machine positioning. Calculation of the statistical index
C2.Measuring of dynamical actions (vibration sensors, high speed camera)
C3.Determination of Tschebyschev and Gauss plane
C4.Proposal and realisation of the measuring system based on LabView sw.
C5.Verification of the measuring system from laboratory practice No. C4 and report elaborating
C6.Evaluation of the shape deviation
C7.Final evaluation of the reports and credits awarding
C2.Measuring of dynamical actions (vibration sensors, high speed camera)
C3.Determination of Tschebyschev and Gauss plane
C4.Proposal and realisation of the measuring system based on LabView sw.
C5.Verification of the measuring system from laboratory practice No. C4 and report elaborating
C6.Evaluation of the shape deviation
C7.Final evaluation of the reports and credits awarding