Course detail

Technological Design

FSI-HT1Acad. year: 2015/2016

Following the theoretical basics of technological design, students will be introduced to the optimal steps in design and methods used in technical project development. In addition, students will utilize computers for project activities, including calculation software, grafic systems & expert systems ASTP (automated system of technological project development). The subject provides complex knowledge on matters relating to project development, from general design of plant layout to detailed designing of workplace. The course mainly focuses on capacity calculations, fundamental plant layout, detailed technical design of workshops & workplace as well as designing integrated manufacturing sections & assembly lines. Furthermore, it looks at utilizing ergonomy in its project activities and economic evaluation of investment actions. Students will also become familiar with basic principles of project management (application conditions, methods, criteria for success of the project etc.).

Language of instruction

Czech

Number of ECTS credits

Mode of study

Not applicable.

Guarantor

Ing. Roman Kubík, Ph.D.

Department

Institute of Manufacturing Technology (ÚST)

Learning outcomes of the course unit

Students will acquire necessary knowledge from the areas of mechanical engineering workshops designing and material handling. The course is focused mainly on different technologies of mechanical engineering, such as metal forming, welding and cutting, machining and casting.

Prerequisites

Basic knowledge of manufacturing technology (forming and machining technology), as well as basic knowledge of machines and technological equipment used.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

The course is taught through lectures explaining the basic principles and theory of the discipline. Exercises are focused on practical topics presented in lectures.

Assesment methods and criteria linked to learning outcomes

The exam has three parts: In the first part the student counts an example from the area of representative models of producing efficiency, in the second part the student solves an example of material store designing, and the third part is a theoretical question from different parts of the subject.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The main goal of the subject is to provide students with all basic information about designing of industrial plants. The course is divided into different parts: one focusing on designing of workshops and production lines, one concentrating on material handling. Both parts are connected with different technology of mechanical engineering.

Specification of controlled education, way of implementation and compensation for absences

Attendance at lectures is checked. The lecture is different each week, that is why an absence may be compensated for in the same week only. Only one lecture may be missed without penalty.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

BLACK, J. Temple. The design of the factory with a future. New York: McGraw-Hill, c1991. ISBN 0070055505.
JEŽKOVÁ, Z., KREJČÍ, H., LACKO, B. a ŠVEC, J. Projektové řízení: Jak zvládnout projekty. Kuřim: Akademické centrum studentských aktivit, 2014, 381 s. ISBN 978-80-905297-1-7.
LACKO, B., ŠVEC, J. a BALATKOVÁ, M. Specifika technických sešitů: Pracovní sešit k publikaci Projektové řízení - Jak zvládnout projekty. Kuřim: Akademické centrum studentských aktivit, 2014. ISBN 978-80-905297-2-4.
MILO, Peter. Technologické projektovanie v praxi. 2., dopl. vyd. Bratislava: Alfa, 1990. Edícia strojárskej literatúry (Alfa).
ROCKSTROH, Wolfgang. Technologické projekty. Bratislava: Alfa, 1978. Edícia strojárskej literatúry (Alfa).
VIGNER, Miloslav. Metodika projektování výrobních procesů. Praha: SNTL-Nakladatelství technické literatury, 1984 (CS)

Recommended reading

HLAVENKA, Bohumil. Projektování výrobních systémů: Technologické projekty I. Vyd. 3. Brno: PC-DIR Real, 1999. Učební texty vysokých škol. ISBN 80-214-1472-3.
KUBÍK, Roman a Jan STREJČEK. Technologické projekty a manipulace s materiálem. Brno: Akademické nakladatelství CERM, 2015. ISBN 978-80-214-5260-2. (CS)
MILO, Peter. Technologické projektovanie v praxi. Bratislava: Alfa, 1983. Edícia strojárskej literatúry (Alfa)
RUMÍŠEK, Pavel. Technologické projekty. Brno: Vysoké učení technické, 1991.

Classification of course in study plans

  • Programme N2301-2 Master's

    branch M-STG , 1 year of study, winter semester, compulsory
    branch M-STM , 1 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

Ing. Jan Strejček, Ph.D., MBA
Ing. Marek Štroner, Ph.D.

Syllabus

1. Introduction to the subject, theoretical foundations
2. Pre-designing methods and steps
3. Capacity computation and calculation of foundry, forging plant, pressing shop and
welding shop
4. Designing of production systems
5. Designing of shops for basic production (foundry, forging plant)
6. Designing of shops for basic production (pressing and stamping shops, welding shops)
7. Designing of production systems with industrial robots
8. Designing of different kinds of machining shops
9. Designing of producing lines and integrated producing cells and blocks
10.Detail designing of producing shops
11.Ergonomy in designing
12.Economy and efficiency of technology projects, new directions of the designing
13.Project management

Computer-assisted exercise

26 hod., compulsory

Teacher / Lecturer

Ing. Jan Strejček, Ph.D., MBA
Ing. Marek Štroner, Ph.D.

Syllabus

1. Capacity computing and calculation of the enterprise project (first part)
2. Capacity computing and calculation of the enterprise project (second part)
3. Capacity project and forging plant computing and calculation
4. Machine layout and disposition of the forging cells and forging plant
5. Capacity calculation of the welding shops
6. Capacity calculation of the foundry and pressing plant
7. Capacity calculation of the producing shops by using of the computer softwares
8. Individual projects of machining shops
9. Computing of the producing area and worker's capacity
10. Choosing of machine and equipment by using the machine lists
11. Different kinds of the non-computers methods and its using (CRAFT etc.)
12. Proposal of the capacity for plants with different number of production pieces
13. Economy of projects, software Excel, efficiency of the production, course-unit credits