Course detail

Computer Aided Technology

FSI-DPPAcad. year: 2015/2016

Students will be made familiar with mostly exploited regions of computer support in technology. The objective focuses on the application of the knowledge in the field of forming, informatics and also other related branches in the course of elaborating an project on a given topic. The basic part of the subject is the work with simulation software using the Finite Element Method and mastering the fundamentals of using software in direct support of technologists work. Mastering the work with above-mentioned software enable assessing of conditions of next data necessary to determine optimum technology for required part. In the area of heat treatment of material the simulation results can be used to determine the usefulness of technological operation. The students will acquire basic experience in production design.

Language of instruction

Czech

Number of ECTS credits

Mode of study

Not applicable.

Guarantor

doc. Ing. Ladislav Daněk, CSc.

Department

Institute of Manufacturing Technology (ÚST)

Learning outcomes of the course unit

Students will be made familiar with the theory, as well as with the latest knowledge in the field CAD-CAM. Students will obtain the basic skills in and experience of elaborating projects in simulation in a field of shaping and foundry, material heat treatment and their plotting.
In a field of software by CAD drawing in 2D mode they will master basic procedures by a component parts design creation.

Prerequisites

Basic knowledge of engineering technology and computer literacy.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

The course is taught through lectures explaining the basic principles and theory of the discipline. Exercises are focused on practical topics presented in lectures.

Assesment methods and criteria linked to learning outcomes

The graded course-unit credit is awarded on condition of having attended all seminars and worked out partial written tasks. Student has to demonstrate his ability to apply the theoretical knowledge in practice.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The objective of the course is to provide students with the necessary knowledge and information from the field of possibilities of computer support utilisation in technology and to acquire bases of a working manner in particular areas of this subject. The students will have a view of what they can expect from computer support results in practice. Students are confronted with the latest results of research.

Specification of controlled education, way of implementation and compensation for absences

Conditions for awarding the course-unit credit: participation in exercises, fulfilling the assignments, and submitting written reports of required content and form. If this condition is not satisfied, the teacher may in justified cases set a make-upcondition.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

ŘIHÁČEK, Jan. FSI VUT v Brně. Počítačová podpora technologie: část tváření. Brno, 2015, 29 s. Sylabus.
ŘIHÁČEK, Jan. FSI VUT v Brně. Simulace tvářecích procesů v softwaru FormFEM: řešené příklady. Brno, 2015, 94 s.
VANĚK, Mojmír. FSI VUT v Brně. Počítačová podpora technologie: část svařování. Brno, 2015. Sylabus.
VANĚK, Mojmír. FSI VUT v Brně. Počítačová podpora technologie: příklady ze simulací svařování a tepelného zpracování. Brno, 2015.

Recommended reading

ESI GROUP. SYSWELD 2015: Reference Manual. 2015, 334 s.
GOLDAK, John A. a Mehdi AKHLAGHI. Computational welding mechanics. New York, USA: Springer, 2005, 321 s. ISBN 03-872-3287-7.
PETRUŽELKA, Jiří a Jiří HRUBÝ. Výpočetní metody ve tváření. 1. vyd. Ostrava: Vysoká škola báňská - Technická univerzita, Strojní fakulta, 2000. ISBN 80-7078-728-7.
VALBERG, Henry S. Applied metal forming including FEM analysis. New York: Cambridge University Press, 2010. ISBN 978-051-1729-430.

Classification of course in study plans

  • Programme B2341-3 Bachelor's

    branch B-STG , 2 year of study, summer semester, compulsory

  • Programme N2301-2 Master's

    branch M-STM , 1 year of study, summer semester, compulsory

Type of course unit

 

Lecture

13 hod., optionally

Teacher / Lecturer

Ing. Mojmír Vaněk, Ph.D.
Ing. Jan Řiháček, Ph.D.
Ing. Tomáš Richter

Syllabus

Forming
1. computer aided technology, samples
new trends on CAD - CAM
chances of exploitation computers in areas projection and manipulation
with materials.
2. modern tendencys in areas projections production systems and their
computers benefits
3. software for technological calculation LADY NORMS
software for technological calculation LADY KALK 2
4. groundwork simulations software and representative,
software FormFEM preprocessing - draft
5. software FormFEM - pre-processing, processing, postprocessing
software FormFEM simulation in the area of heat treatment of material
6. monitoring production CAR, CAA, software KALK 4
software Q Form + Form2d – simulation,preprocessing work in
postprocessor
7. software RAPID PROTOTYPING,Pro/Engineer

Welding.
8. theoretical introduction to numeric simulation of welding and heat treating.
9. workflow at welding simulations.
10. thermal processes by welding and their mathematic modeling
11. material - building of models for calculation. Weldeability.
12. tension and deformation during welding, their numeric desription
13. employment of numeric simulatoon in foundry industry.

Computer-assisted exercise

26 hod., compulsory

Teacher / Lecturer

Ing. Mojmír Vaněk, Ph.D.
Ing. Tomáš Richter
Ing. Jan Řiháček, Ph.D.

Syllabus

1. samples of software computer aided technology
2. the work with software LADY NORMS + LADY KALK 2
3. practical application of software LADY NORMS + LADY KALK 2
4. identification with software, computer project and evaluation primary
projection designs
5. benefication particular designs from out area projection after
prepossess acquirements
6. work with software CAD
7. software FORMFEM simulation the area of heat treatment of material
8. software Q Form + Form 2d, preprocessing, postprocessing
9. simulation engaged task - preprocessing
10. simulation engaged task - processing
11. simulation engaged task - postprocessing
12. Credit test, editing postprocessor FormFEM
13. graded course-unit credit, bat research news and simulation