Course detail
Physics II
FAST-GB02Acad. year: 2012/2013
Electricity – electrostatic field, steady-state electric current,magnetic field, circuits with time-dependent currents, alternating electric current, measurement of non-electric quantities with electrical methods,
current in semiconductors, current rectifiers, amplifiers, frequency convertors, modulators and demodulators,oscillators.
Electromagnetic field, Maxwell equations, electromagnetic waves, radiolocator-pulsed, FM, Doppler.
Language of instruction
Czech
Number of ECTS credits
5
Mode of study
Not applicable.
Guarantor
Department
Institute of Physics (FYZ)
Learning outcomes of the course unit
To obtain the elementary knowledges and practical skill in these fields of physics: Electricity and
Prerequisites
Basic knowledge of secondary school physics,grouding of high school mathematics,derivative, integral,fundamental differential equations.
Co-requisites
Not applicable.
Planned learning activities and teaching methods
Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations. Rules for Studies and Examinations. The method is based on a series of lectures (two two-lesson lectures per each week) and laboratory exercises (two-lesson measurement per each week). In addition, students have to solve a series of numerical problems. The solutions of these problems are checked by the teachers in the laboratory exercises.
Assesment methods and criteria linked to learning outcomes
Minimum requirements
The student's condition for gaining a credit is measurement of nine laboratory exercises and creating lab reports on-the-fly. Further, students must calculate twenty examples given by the teacher. The last condition is a successful pass of the final test in the form of examples. The exam consists of written part, which contains four examples and oral part with four theoretical questions. All topics come from the lectures. Both parts must be successfully finished.
The student's condition for gaining a credit is measurement of nine laboratory exercises and creating lab reports on-the-fly. Further, students must calculate twenty examples given by the teacher. The last condition is a successful pass of the final test in the form of examples. The exam consists of written part, which contains four examples and oral part with four theoretical questions. All topics come from the lectures. Both parts must be successfully finished.
Course curriculum
1.Electricity,electrostatic field.
2.Electrostatic field in dielectrics.
3.Steady-state electric current.
4.Magnetic field.
5.Circuits with time-dependent currents.
6.Alternating electric current.
7.Electrical current in semiconductors,current rectifiers,amplifiers.
8.Frequency convertors,modulators,oscillators.
9.Electromagnetic field, Maxwell equations.
10.Electromagnetic waves,antennas.
11.Radiolocator pulsed, FM, Doppler.
12.Measure of time interval,frequency and phase.
13.Measurement of non-electric quantities with electrical methods.
2.Electrostatic field in dielectrics.
3.Steady-state electric current.
4.Magnetic field.
5.Circuits with time-dependent currents.
6.Alternating electric current.
7.Electrical current in semiconductors,current rectifiers,amplifiers.
8.Frequency convertors,modulators,oscillators.
9.Electromagnetic field, Maxwell equations.
10.Electromagnetic waves,antennas.
11.Radiolocator pulsed, FM, Doppler.
12.Measure of time interval,frequency and phase.
13.Measurement of non-electric quantities with electrical methods.
Work placements
no
Aims
To obtain the elementary knowledge and practical experience in physical domens: electrical field, magnetic field,electromagnetic field.
Specification of controlled education, way of implementation and compensation for absences
Extent and forms are specified by guarantor’s regulation updated for every academic year.
Recommended optional programme components
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Ficker T.: Fyzikální praktikum. CERM Brno, 1999. (CS)
Koktavý B., Koktavý P.: Elektřina a magnetizmus. CERM Brno, 1998. (CS)
Koktavý B., Koktavý P.: Elektřina a magnetizmus. CERM Brno, 1998. (CS)
Recommended reading
Not applicable.
Classification of course in study plans
Type of course unit
Lecture
26 hod., optionally
Teacher / Lecturer
Syllabus
1.Electricity,electrostatic field.
2.Electrostatic field in dielectrics.
3.Steady-state electric current.
4.Magnetic field.
5.Circuits with time-dependent currents.
6.Alternating electric current.
7.Electrical current in semiconductors,current rectifiers,amplifiers.
8.Frequency convertors,modulators,oscillators.
9.Electromagnetic field, Maxwell equations.
10.Electromagnetic waves,antennas.
11.Radiolocator pulsed, FM, Doppler.
12.Measure of time interval,frequency and phase.
13.Measurement of non-electric quantities with electrical methods.
2.Electrostatic field in dielectrics.
3.Steady-state electric current.
4.Magnetic field.
5.Circuits with time-dependent currents.
6.Alternating electric current.
7.Electrical current in semiconductors,current rectifiers,amplifiers.
8.Frequency convertors,modulators,oscillators.
9.Electromagnetic field, Maxwell equations.
10.Electromagnetic waves,antennas.
11.Radiolocator pulsed, FM, Doppler.
12.Measure of time interval,frequency and phase.
13.Measurement of non-electric quantities with electrical methods.
Exercise
26 hod., compulsory
Teacher / Lecturer
Syllabus
Week 1: instructions - introduction to methods of measurement, calculation methods, roles for an entire semester (cyclic tasks for pairs of students familiar with the safety regulations for work on electrical installations in student labs)
Week 2 first laboratory measurement tasks according to the schedule
Week 3 following measurements according to schedule and commit the previous measurements and calculated examples
Week 4 following measurements according to schedule and commit the previous measurements and calculated examples
Week 5 following measurements according to schedule and commit the previous measurements and calculated examples
Week 6 following measurements according to schedule and commit the previous measurements and calculated examples
Week 7 consultation, corrections, measurement of errorneous exercises
Week 8 following measurements according to schedule and commit the previous measurements and calculated examples
Week 9 following measurements according to schedule and commit the previous measurements and calculated examples
Week 10 following measurements according to schedule and commit the previous measurements and calculated examples
Week 11 following measurements according to schedule and commit the previous measurements and calculated examples
Week 12 following measurements according to schedule and commit the previous measurements and calculated examples
Week 13 exam and submission of the minutes of the previous measurements, credit
Laboratory exercises:
Determination of electrical resistance by direct method
Determination of inductance and quality of coil by direct method
VA characteristics of semiconductor diodes
Determination of transistor characteristics
Determination of elementary charge from transistor characteristics
Determination of specific heat capacity of solids calorimeter
Determination of the coefficient of thermal expansion
Determination of calibration curve thermocouple
Determination of calibration curve thermistor
Determination of calibration curve thermo-diode
Determination of the coefficient of heat pump
Week 2 first laboratory measurement tasks according to the schedule
Week 3 following measurements according to schedule and commit the previous measurements and calculated examples
Week 4 following measurements according to schedule and commit the previous measurements and calculated examples
Week 5 following measurements according to schedule and commit the previous measurements and calculated examples
Week 6 following measurements according to schedule and commit the previous measurements and calculated examples
Week 7 consultation, corrections, measurement of errorneous exercises
Week 8 following measurements according to schedule and commit the previous measurements and calculated examples
Week 9 following measurements according to schedule and commit the previous measurements and calculated examples
Week 10 following measurements according to schedule and commit the previous measurements and calculated examples
Week 11 following measurements according to schedule and commit the previous measurements and calculated examples
Week 12 following measurements according to schedule and commit the previous measurements and calculated examples
Week 13 exam and submission of the minutes of the previous measurements, credit
Laboratory exercises:
Determination of electrical resistance by direct method
Determination of inductance and quality of coil by direct method
VA characteristics of semiconductor diodes
Determination of transistor characteristics
Determination of elementary charge from transistor characteristics
Determination of specific heat capacity of solids calorimeter
Determination of the coefficient of thermal expansion
Determination of calibration curve thermocouple
Determination of calibration curve thermistor
Determination of calibration curve thermo-diode
Determination of the coefficient of heat pump