Publication result detail

Fatigue behaviour of NiCr-type of austenitic nodular cast iron

VAŠKO, A.; UHRÍČIK, M.; BELAN, J.; PASTIERČIKOVÁ, l.; KAŇA, V.

Original Title

Fatigue behaviour of NiCr-type of austenitic nodular cast iron

English Title

Fatigue behaviour of NiCr-type of austenitic nodular cast iron

Type

Paper in proceedings (conference paper)

Original Abstract

High resistance to high and low temperatures, resistance to corrosion when exposed to salt water and alkaline media, resistance to wear, high elongation, and paramagnetism are all characteristics of austenitic nodular cast iron. However, less research has been done on the fatigue resistance of austenitic nodular cast iron. Therefore, the objective of this study is to determine the fatigue characteristics of austenitic nodular cast iron and compare them to those of different types of nodular cast iron. The nodular cast iron used in the research (EN-GJSA-XNiCr20-2) was alloyed with 20% nickel and 2% chromium to create an austenitic matrix. Light metallographic microscopy was used to examine the microstructure. A tensile test, an impact bending test, and a Brinell hardness test were used to examine the mechanical properties of the material. Fatigue tests were done under sinusoidal cyclic push-pull loads at room temperature to obtain the Wöhler curve and determine the fatigue limit. The results of these tests were compared with the fatigue characteristics of nodular cast irons with different matrixes, namely ferrite-pearlitic and pearlite-ferritic nodular cast irons.

English abstract

High resistance to high and low temperatures, resistance to corrosion when exposed to salt water and alkaline media, resistance to wear, high elongation, and paramagnetism are all characteristics of austenitic nodular cast iron. However, less research has been done on the fatigue resistance of austenitic nodular cast iron. Therefore, the objective of this study is to determine the fatigue characteristics of austenitic nodular cast iron and compare them to those of different types of nodular cast iron. The nodular cast iron used in the research (EN-GJSA-XNiCr20-2) was alloyed with 20% nickel and 2% chromium to create an austenitic matrix. Light metallographic microscopy was used to examine the microstructure. A tensile test, an impact bending test, and a Brinell hardness test were used to examine the mechanical properties of the material. Fatigue tests were done under sinusoidal cyclic push-pull loads at room temperature to obtain the Wöhler curve and determine the fatigue limit. The results of these tests were compared with the fatigue characteristics of nodular cast irons with different matrixes, namely ferrite-pearlitic and pearlite-ferritic nodular cast irons.

Keywords

Ni-Resist; NiCr-nodular cast iron; austenitic matrix; fatigue

Key words in English

Ni-Resist; NiCr-nodular cast iron; austenitic matrix; fatigue

Authors

VAŠKO, A.; UHRÍČIK, M.; BELAN, J.; PASTIERČIKOVÁ, l.; KAŇA, V.

RIV year

2024

Released

24.11.2023

Publisher

Elsevier

Book

Procedia Structural Integrity

ISBN

2452-3216

Periodical

Procedia Structural Integrity

Volume

51

State

Republic of Italy

Pages from

129

Pages to

134

Pages count

6

URL

https://www.sciencedirect.com/science/article/pii/S2452321623006728

Full text in the Digital Library

http://hdl.handle.net/11012/245166

BibTex

@inproceedings{BUT187367,
  author="Alan {Vaško} and Milan {Uhríčik} and Juraj {Belan} and Lucia {Pastierovičová} and Václav {Kaňa}",
  title="Fatigue behaviour of NiCr-type of austenitic nodular cast iron",
  booktitle="Procedia Structural Integrity",
  year="2023",
  journal="Procedia Structural Integrity",
  volume="51",
  pages="129--134",
  publisher="Elsevier",
  doi="10.1016/j.prostr.2023.10.078",
  issn="2452-3216",
  url="https://www.sciencedirect.com/science/article/pii/S2452321623006728"
}

Documents

1-s2.0-S2452321623006728-main