Publication result detail

COMPARISON OF MEASUREMENT METHODS FOR CHARACTERIZATION OF 3D PRINTED LOW-LOSS ARTIFICIAL DIELECTRIC SUBSTRATE BASED ON CROSS UNIT CELL

KADĚRA, P.

Original Title

COMPARISON OF MEASUREMENT METHODS FOR CHARACTERIZATION OF 3D PRINTED LOW-LOSS ARTIFICIAL DIELECTRIC SUBSTRATE BASED ON CROSS UNIT CELL

English Title

COMPARISON OF MEASUREMENT METHODS FOR CHARACTERIZATION OF 3D PRINTED LOW-LOSS ARTIFICIAL DIELECTRIC SUBSTRATE BASED ON CROSS UNIT CELL

Type

Paper in proceedings (conference paper)

Original Abstract

This paper deals with the effective complex permittivity determination of low-loss 3D printed artificial dielectric substrate based on a cross unit cell. The two resonators working with TE011 and TM010 modes suitable for a uniaxial anisotropy determination are compared with the transmission / reflection waveguide method. To evaluate the methods’ performance, the eigenmode analysis is carried out to provide precise reference values.

English abstract

This paper deals with the effective complex permittivity determination of low-loss 3D printed artificial dielectric substrate based on a cross unit cell. The two resonators working with TE011 and TM010 modes suitable for a uniaxial anisotropy determination are compared with the transmission / reflection waveguide method. To evaluate the methods’ performance, the eigenmode analysis is carried out to provide precise reference values.

Keywords

Complex permittivity; artificial dielectric substrate; 3D printing; dielectric characterization; uniaxial anisotropy; resonators; waveguide

Key words in English

Complex permittivity; artificial dielectric substrate; 3D printing; dielectric characterization; uniaxial anisotropy; resonators; waveguide

Authors

KADĚRA, P.

RIV year

2021

Released

27.04.2021

Publisher

Brno University of Technology, Faculty of Electrical Engineering and Communication

Location

Brno

ISBN

978-80-214-5943-4

Book

Proceedings II of the 27th Conference Student EEICT 2021 selected papers

Pages from

214

Pages to

218

Pages count

5

URL

https://www.fekt.vut.cz/conf/EEICT/archiv/sborniky/EEICT_2021_sbornik_2.pdf

BibTex

@inproceedings{BUT171577,
  author="Petr {Kaděra}",
  title="COMPARISON OF MEASUREMENT METHODS FOR CHARACTERIZATION OF 3D PRINTED LOW-LOSS ARTIFICIAL DIELECTRIC SUBSTRATE BASED ON CROSS UNIT CELL",
  booktitle="Proceedings II of the 27th Conference Student EEICT 2021 selected papers",
  year="2021",
  number="1",
  pages="214--218",
  publisher="Brno University of Technology, Faculty of Electrical Engineering and Communication",
  address="Brno",
  doi="10.13164/eeict.2021.214",
  isbn="978-80-214-5943-4",
  url="https://www.fekt.vut.cz/conf/EEICT/archiv/sborniky/EEICT_2021_sbornik_2.pdf"
}