Publication result detail

Cutting conditions and tool wear when machining wood-based materials

Chladil, J., Sedlák, J., Rybářová, E. R., Kučera, M., and Dado, M.

Original Title

Cutting conditions and tool wear when machining wood-based materials

English Title

Cutting conditions and tool wear when machining wood-based materials

Type

WoS Article

Original Abstract

The article deals with data in the cutting process of wood-based materials. The cutting process influences the shape and dimensions of a cutting edge. The experiments were focused on monitoring the changes of the cutting edge in machining of particle board and the influence of cutting speed on the tool wear. Cutting tests were performed during milling at cutting rates in the range 7.95 to 17.9 m/s (477 to 1074 m/min), a depth of cut of 9.5 mm, and a tooth feed of 0.05 mm. The wear process of cutting wedge during particle board milling is characterized by a decrease in the cutting edge of insert blades. The comparative digital dial gauge was used for measurement of the cutting wedge recession. The course of the wear of wood based materials exhibited similarity in graphical representation with abrasive material cutting. The resulting dependency may be used for selection of the most suitable cutting conditions according to operator requirements.

English abstract

The article deals with data in the cutting process of wood-based materials. The cutting process influences the shape and dimensions of a cutting edge. The experiments were focused on monitoring the changes of the cutting edge in machining of particle board and the influence of cutting speed on the tool wear. Cutting tests were performed during milling at cutting rates in the range 7.95 to 17.9 m/s (477 to 1074 m/min), a depth of cut of 9.5 mm, and a tooth feed of 0.05 mm. The wear process of cutting wedge during particle board milling is characterized by a decrease in the cutting edge of insert blades. The comparative digital dial gauge was used for measurement of the cutting wedge recession. The course of the wear of wood based materials exhibited similarity in graphical representation with abrasive material cutting. The resulting dependency may be used for selection of the most suitable cutting conditions according to operator requirements.

Keywords

Machining, wood, tool wear dulling, cutting conditions

Key words in English

Machining, wood, tool wear dulling, cutting conditions

Authors

Chladil, J., Sedlák, J., Rybářová, E. R., Kučera, M., and Dado, M.

RIV year

2019

Released

08.03.2019

Publisher

BioResources

ISBN

1930-2126

Periodical

BioResources

Volume

14

Number

2

State

United States of America

Pages from

3495

Pages to

3505

Pages count

11

URL

https://bioresources.cnr.ncsu.edu/issues/vol14-issue2/page/8/

BibTex

@article{BUT156184,
  author="Josef {Chladil} and Josef {Sedlák}",
  title="Cutting conditions and tool wear when machining wood-based materials",
  journal="BioResources",
  year="2019",
  volume="14",
  number="2",
  pages="3495--3505",
  doi="10.15376/biores.14.2.3495-3505",
  issn="1930-2126",
  url="https://bioresources.cnr.ncsu.edu/issues/vol14-issue2/page/8/"
}