Project detail

Aditivní výroba pokročilých materiálů a struktur

Duration: 01.03.2023 — 28.02.2026

Funding resources

Brno University of Technology - Vnitřní projekty VUT

- whole funder (2023-01-01 - 2024-12-31)

On the project

Projekt je zaměřen na podporu vědeckovýzkumných činností studentů doktorských a magisterských studijních programů strojního inženýrství v oblasti zpracování pokročilých materiálů a struktur aditivními procesy, studium jejich materiálových vlastností, vývoj výpočtových modelů popisující jejich chování a postupů pro jejich optimální návrh. Projekt se soustředí na procesy aditivní výroby LPBF, WAAM, 3DCP a robotickou depozici polymerních materiálů.

Mark

FSI-S-23-8340

Default language

Czech

People responsible

Červinek Ondřej, Ing., Ph.D. - fellow researcher
Duchoň Matěj, Ing. - fellow researcher
Fábry Adam, Bc. - fellow researcher
Florián Vojtěch, Bc. - fellow researcher
Franke Jakub, Ing. - fellow researcher
Grygar Filip, Ing. - fellow researcher
Hurník Jakub, Ing., Ph.D. - fellow researcher
Jaroš Jan, Ing. - fellow researcher
Javorský Dominik, Ing. - fellow researcher
Koupil Michael, Ing. - fellow researcher
Koutecký Tomáš, Ing., Ph.D. - fellow researcher
Krčma Martin, Ing., Ph.D. - fellow researcher
Křivohlavý Petr, Ing. - fellow researcher
Lukačovič Samuel, Ing. - fellow researcher
Malý Martin, Ing., Ph.D. - fellow researcher
Pchálek Václav, Ing. - fellow researcher
Simon Jakub, Bc. - fellow researcher
Slavíček Jakub, Ing. - fellow researcher
Sobol Vítězslav, Bc. - fellow researcher
Škaroupka David, Ing., Ph.D. - fellow researcher
Šnajdr Petr, Bc. - fellow researcher
Šváb Čeněk, Ing. - fellow researcher
Vaverka Ondřej, Ing. - fellow researcher
Vespalec Arnošt, Ing. - fellow researcher
Vícha Daniel, Ing. - fellow researcher
Zeman Stanislav, Bc. - fellow researcher
Koutný Daniel, doc. Ing., Ph.D. - principal person responsible

Units

Institute of Machine and Industrial Design
- (2023-01-01 - 2025-12-31)
Faculty of Mechanical Engineering
- (2023-01-01 - 2025-12-31)

Results

ŠMÍD, M.; KOUTNÝ, D.; NEUMANNOVÁ, K.; CHLUP, Z.; NÁHLÍK, L.; JAMBOR, M. Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304L produced by laser powder bed fusion. Additive Manufacturing, 2023, vol. 68, no. 1, p. 1-14. ISSN: 2214-8604.
Detail

VESPALEC, A.; PODROUŽEK, J.; BOŠTÍK, J.; MIČA, L.; KOUTNÝ, D. Experimental study on time dependent behaviour of coarse aggregate concrete mixture for 3D construction printing. Construction and building materials, 2023, vol. 376, no. 5, p. 1-12. ISSN: 0950-0618.
Detail

VESPALEC, A.; PODROUŽEK, J.; KOUTNÝ, D. DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm. Materials, 2023, vol. 16, no. 9, p. 1-17. ISSN: 1996-1944.
Detail

VÍTEK, P.; HURNÍK, J.; VAVERKA, O.; KOUTNÝ, D. Forging measurement using passive stereo vision. In Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 126181V. SPIE, 2023. p. 126181V-1 (126181V-15 p.)ISBN: 9781510664456.
Detail

JAROŠ, J.; VAVERKA, O.; SENCK, S.; KOUTNÝ, D. Influence of Process Energy on the Formation of Imperfections in Body-Centered Cubic Cells with Struts in the Vertical Orientation Produced by Laser Powder Bed Fusion from the Magnesium Alloy WE43. Micromachines, 2024, vol. 15, no. 2, p. 1-16. ISSN: 2072-666X.
Detail

FRANKE, J.; KOUTECKÝ, T.; KOUTNÝ, D. Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time. Materials, 2023, vol. 16, no. 18, p. 1-15. ISSN: 1996-1944.
Detail

MALÝ, M.; KOUTNÝ, D.; MICHÁLEK, M. Processing of metallic materials by Laser Powder Bed Fusion at elevated temperatures. Metal Additive Manufacturing Conference 2023. October 17 - 19, 2023. WKO, Vienna: Metal Additive Manufacturing Conference 2023, 2023. p. 129-139.
Detail

JAMBOR, M.; VOJTEK, T.; POKORNÝ, P.; KOUTNÝ, D.; NÁHLÍK, L.; HUTAŘ, P.; ŠMÍD, M. Anomalous fatigue crack propagation behavior in near-threshold region of L-PBF prepared austenitic stainless steel. Materials Science and Engineering A, 2023, vol. 872, no. 144982, ISSN: 0921-5093.
Detail

SEMANČÍK, A.; HYNEK, J.; LUKAČOVIČ, S.; KOUTECKÝ, T. Photogrammetry for optical metrology of parts manufactured by additive manufacturing. In Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII. Proceedings of SPIE. Munich, Germany: Society of Photo-Optical Instrumentation Engineers (SPIE), 2023. p. 126180K-1 (126180K-14 p.)ISSN: 0277-786X.
Detail