Brno University of Technology - Vnitřní projekty VUT

- whole funder (2014-01-01 - 2015-12-31)

FSI-S-14-2211

Czech

Cejpek Jakub, Ing., Ph.D. - fellow researcher
Hlinka Jiří, doc. Ing., Ph.D. - fellow researcher
Janhuba Luboš, Ing., Ph.D. - fellow researcher
Jebáček Ivo, doc. Ing., Ph.D. - fellow researcher
Koštial Rostislav, Ing., Ph.D. - fellow researcher
Koutník Tomáš, Ing. - fellow researcher
Lajza Ondřej, Ing., Ph.D. - fellow researcher
Pejchar Jan, Ing. - fellow researcher
Popela Robert, Ing., Ph.D. - fellow researcher
Weis Martin, Ing. - fellow researcher
Juračka Jaroslav, doc. Ing., Ph.D. - principal person responsible

Institute of Aerospace Engineering
- (2014-01-01 - 2016-12-31)
Faculty of Mechanical Engineering
- (2014-01-01 - 2016-12-31)

KOŠTIAL, R. SUMMARY OF ANTI-ICING/DE-ICING SYSTEMS PATENTS. Brno: 2014.
Detail

Eva Josth Adamova, Pavel Klang, Jan Kubalcik, Petr Casek. Initial STM performance evaluation - preliminary results. 2015.
Detail

BEKETOVA, G.; SHEVTSOVA, M.; SYMONOV, V. Comparison of Hybrid Metal-Composite Micropin Joints with Conventional Ones in terms of Fatigue Life. In Engineering Mechanics 2015. Trans Tech Publications Inc.: Trans Tech Publications Inc., 2015. p. 479-485. ISBN: 978-3-03835-700-1.
Detail

KATRŇÁK, T.; JURAČKA, J. Detailed topometry FEM optimization of wing structural panel. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 357-363. ISSN: 1662-7482.
Detail

CEJPEK, J.; WEIS, M.; JURAČKA, J. Acoustic Emission Localization in Testing of Composite Structures. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 405-411. ISSN: 1662-7482.
Detail

KOUTNÍK, T.; DOUPNÍK, P. Validation Task for Solution of Optimal Slotted Flap Position Using FLUENT Software. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 10-15. ISSN: 1662-7482.
Detail

BEKETOVA, G.; SHEVTSOVA, M.; SYMONOV, V. Comparison of Hybrid Metal-Composite Micropin Joints with Conventional Ones in terms of Fatigue Life. Svratka, ČR: 2015.
Detail

SYMONOV, V.; JURAČKA, J.; LÖFFELMANN, F. Comparison of MSC.Software Failure Models MAT8A, MATD054, and MATD058 of Composite Materials. MECHANICS OF COMPOSITE MATERIALS, 2018, vol. 54, no. 55, p. 591-604. ISSN: 0191-5665.
Detail

CEJPEK, J. Simulation o leading edge heating system. Letecký ústav, VUT v Brně: 2015. p. 1-15.
Detail

KOŠTIAL, R. PŘEHLED A POPIS ZKOUŠEK VZORKŮ ANTI-ICING SYSTÉMU V KLIMATICKÉ KOMOŘE. 2016.
Detail

KOŠTIAL, R. VYHODNOCENÍ ZKOUŠEK ANTI-NÁMRAZOVÉHO SYSTÉMU. 2016.
Detail

Petr Casek, Honeywell; Jan Kubalcik, Honeywell; Pavel Klang, Honeywell; Christian Aveneau, DSNA;. Technical Validation Plan of ACAS Xa. 2014.
Detail

Eva Adamová, Petr Cásek. Operational requirements, assumptions and scenarios for GA in European environment. SESAR Joint Undertaking, 2014.
Detail

Eva Josth Adamova, Pavel Klang. STM Technical Specifications – issue 3. SESAR Joint Undertaking, 2016.
Detail

Silvie Luisa Brazdilova, Eva Adamova. Comparison study of TSAA and ACAS-X performance. SESAR Joint Undertaking, 2015.
Detail

Petr Casek, Eva Adamova, Jan Kubalcik, Pavel Klang. Technical Validation Plan of ACAS Xa. SESAR Joint Undertaking, 2014.
Detail

Jan Kubalcik, Eva Adamova, Pavel Klang. Validation Report (VALR) from Initial STM Performance Evaluation. SESAR Joint Undertaking, 2015.
Detail

Jan Kubalcik, Pavel Klang, Eva Josth Adamova. VALR from ACAS-Xa technical validation. SESAR JU, 2016.
Detail

Eva Adamova. Validation Plan (VALP) for 2016 validation of ACAS Xa. SESAR JU, 2015.
Detail

Eva Adamova. SESAR Project 9.47 - TCAS evolution. 2015.
Detail

Eva Adamova. Support to standardization activities report. 2016.
Detail

Eva Adamova, Petr Casek. Technical feedback on proposed TCAS changes. SESAR JU, 2013.
Detail

SYMONOV, V.; POPELA, R.; HLINKA, J.; JEBACEK, I. Composite Wing Leading Edge Design: Technical Specification. 2014. p. 1-13.
Detail