prof. Ing.

Luboš Náhlík

Ph.D.

FME, ISMMB DMAM – Professor

nahlik@fme.vutbr.cz

Send BUT message

prof. Ing. Luboš Náhlík, Ph.D.

Publications

  • 2023

    TRÁVNÍČEK, L.; PODUŠKA, J.; KUČERA, J.; NÁHLÍK, L.; HUTAŘ, P. Comparison of fatigue performance of polyethylene pipe grades in the form of extruded and compression molded specimens. Procedia Structural Integrity, 2023, vol. 43, no. 1, p. 148-153. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    TRÁVNÍČEK, L.; PODUŠKA, J.; MESSIHA, M.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L.; HUTAŘ, P. Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes. Engineering Fracture Mechanics, 2023, vol. 289, no. 1 September 2023, ISSN: 0013-7944.
    Detail | WWW

    MILOVANOVIĆ, A.; PODUŠKA, J.; TRÁVNÍČEK, L.; NÁHLÍK, L.; SEDMAK, A.; MILOŠEVIĆ, M.; BERTO, F. Side-groove effect on fracture mechanical fatigue testing of PLA material. Procedia Structural Integrity, 2023, vol. 42, no. 1, p. 847-856. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2022

    DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; KAJÁNEK, D.; FAJKOŠ, R.; HUTAŘ, P. Estimation of residual stress distribution in railway axles. ENGINEERING FAILURE ANALYSIS, 2022, vol. 135, no. 1, p. 106142-1 (106142-15 p.)ISSN: 1873-1961.
    Detail | WWW

    KUBÍČEK, R.; OPLT, T.; VOJTEK, T.; NÁHLÍK, L.; HUTAŘ, P. Crack Front Shape Based on Plastic Component of CTOD. 23rd International Scientific Conference APPLIED MECHANICS 2022 – Book of Abstracts. first. Prague: Czech Technical University in Prague, 2022. p. 61-64. ISBN: 978-80-01-06974-5.
    Detail | WWW

    DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Residual stress determination by the layer removal and X-ray diffraction measurement correction method. MethodsX, 2022, vol. 2022, no. 9, p. 101768-1 (101768-15 p.)ISSN: 2215-0161.
    Detail | WWW

  • 2021

    DLHÝ, P.; PODUŠKA, J.; BERER, M.; GOSCH, A.; SLÁVIK, O.; NÁHLÍK, L.; HUTAŘ, P. Crack Propagation Analysis of Compression Loaded Rolling Elements. Materials, 2021, vol. 14, no. 10, p. 2656-1 (2656-24 p.)ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    POKORNÝ, P.; VOJTEK, T.; JAMBOR, M.; NÁHLÍK, L.; HUTAŘ, P. Effect of Underload Cycles on Oxide-Induced Crack Closure Development in Cr-Mo Low-Alloy Steel. Materials, 2021, vol. 14, no. 10, p. 1-22. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

  • 2020

    POKORNÝ, P.; DLHÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; VOJTEK, T.; NÁHLÍK, L.; GRASSO, M.; HUTAŘ, P. Influence of heat treatment-induced residual stress on residual fatigue life of railway axles. Theoretical and Applied Fracture Mechanics, 2020, vol. 109, no. 1, p. 1-13. ISSN: 0167-8442.
    Detail | WWW

    VOJTEK, T.; POKORNÝ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Classically determined effective Delta K fails to quantify crack growth rates. Theoretical and Applied Fracture Mechanics, 2020, vol. 108, no. 1, p. 1-13. ISSN: 0167-8442.
    Detail | WWW | Full text in the Digital Library

    PODUŠKA, J.; DLHÝ, P.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; NÁHLÍK, L. Design of plastic pipes considering content of recycled material. Procedia Structural Integrity, 2020, vol. 23, no. 2019, p. 293-298. ISSN: 2452-3216.
    Detail | WWW

    HUTAŘ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L. Numerical simulations of semi-elliptical fatigue crack propagation. AIP conference proceedings, 2020, vol. 2309, no. -, p. 1-14. ISSN: 0094-243X.
    Detail | WWW

    OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; BERTO, F. Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Structural Integrity, 2020, vol. 23, no. -, p. 101-106. ISSN: 2452-3216.
    Detail | WWW

    SLÁVIK, O.; HUTAŘ, P.; GOSCH, A.; BERER, M.; VOJTEK, T.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Fatigue crack propagation under mixed mode I and III in polyoxymethelene homopolymer. In Key Engineering Materials. Key Engineering Materials (print). Scientific.Net, 2020. p. 404-409. ISBN: 9783035715866. ISSN: 1013-9826.
    Detail | WWW

  • 2019

    VOJTEK, T.; POKORNÝ, P.; KUBĚNA, I.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. INTERNATIONAL JOURNAL OF FATIGUE, 2019, vol. 123, no. 1, p. 213-224. ISSN: 1879-3452.
    Detail | WWW

    OPLT, T.; ŠEBÍK, M.; BERTO, F.; NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Strategy of plasticity induced crack closure numerical evaluation. Theoretical and Applied Fracture Mechanics, 2019, vol. 102, no. 1, p. 59-69. ISSN: 0167-8442.
    Detail | WWW

    PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; PINTER, G.; NÁHLÍK, L. Lifetime calculation of soil-loaded non-pressure polymer pipes. Key Engineering Materials (print), 2019, vol. 827, no. 2020, p. 141-146. ISSN: 1013-9826.
    Detail | WWW

    DLHÝ, P.; PODUŠKA, J.; POKORNÝ, P.; NÁHLÍK, L.; FAJKOŠ, R.; HUTAŘ, P. Methodology for estimation of residual stresses in hardened railway axle. In Procedia Structural Integrity. Procedia Structural Integrity. 2019. p. 185-190. ISSN: 2452-3216.
    Detail

    PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Soil Load on Plastic Pipe and its Influence on Lifetime. Strojnícky časopis, 2019, vol. 69, no. 3, p. 101-106. ISSN: 0039-2472.
    Detail | WWW

    VOJTEK, T.; POKORNÝ, P.; NÁHLÍK, L.; HERRERO, D.; HUTAŘ, P. Crack Closure in the Near-threshold Region in Metallic Materials. Procedia Structural Integrity, 2019, vol. 23, no. 1, p. 481-486. ISSN: 2452-3216.
    Detail | WWW

  • 2018

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical applied stress for crack initiation from a sharp V-notch. Theoretical and Applied Fracture Mechanics, 2018, no. 93, p. 247-262. ISSN: 0167-8442.
    Detail

    NÁHLÍK, L.; MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Lifetime Assessment of Particulate Ceramic Composite with Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 107-110. ISBN: 978-3-0357-1168-4. ISSN: 1662-9795.
    Detail | WWW

    ŠTEGNEROVÁ, K.; MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. 3D Model of Crack Propagation in Particulate Ceramic Composite Containing Residual Stresses. In Advances in Fracture and Damage Mechanics XVI. Key Engineering Materials (print). Zürrich, Switzerland: Trans Tech Publications Inc., 2018. p. 103-106. ISBN: 9783035713503. ISSN: 1013-9826.
    Detail | WWW

    OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; CHLUP, Z.; BERTO, F. Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. INTERNATIONAL JOURNAL OF FATIGUE, 2018, vol. 118, no. 2019, p. 249-261. ISSN: 0142-1123.
    Detail | WWW

    SLÁVIK, O.; HUTAŘ, P.; BERER, M.; GOSCH, A.; ARBEITER, F.; PINTER, G.; NÁHLÍK, L. Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions. Key Engineering Materials (print), 2018, vol. 774, no. 2018, p. 325-330. ISSN: 1013-9826.
    Detail | WWW

    PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Engineering Fracture Mechanics, 2018, vol. 203, no. 2018, p. 18-31. ISSN: 0013-7944.
    Detail | WWW

    DLHÝ, P.; PODUŠKA, J.; NÁHLÍK, L.; BERER, M.; GOSCH, A.; PINTER, G.; HUTAŘ, P. Compression-Loaded Cracked Cylinder – Stress Intensity Factor Evaluation. Key Engineering Materials (print), 2018, vol. 774, no. 2018, p. 331-336. ISSN: 1013-9826.
    Detail | WWW

  • 2017

    NÁHLÍK, L.; POKORNÝ, P.; FAJKOŠ, R.; HUTAŘ, P., ŠEVČÍK M., MATUŠEK P. Fatigue lifetime estimation of railway axles. ENGINEERING FAILURE ANALYSIS, 2017, vol. 2017, no. 73, p. 139-157. ISSN: 1350-6307.
    Detail | WWW

    NÁHLÍK, L.; POKORNÝ, P.; ŠEVČÍK, M.; HUTAŘ, P. Influence of Initial Inclined Surface Crack on Estimated Residual Fatigue Lifetime of Railway Axle. Journal of Multiscale Modeling, 2017, vol. 7, no. 4, p. 1-6. ISSN: 1756-9737.
    Detail | WWW

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; BERMEJO, R.; HUTAŘ, P. Influence of particle attributes on residual stresses in particulate ceramic composites. Solid State Phenomena, 2017, no. 258, p. 190-193. ISSN: 1012-0394.
    Detail

    OPLT, T.; POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The Effect of the Free Surface on the Singular Stress Field at the Fatigue Crack Front. Journal of Mechanical Engineering - Strojnícky časopis, 2017, vol. 67, no. 2, p. 69-76. ISSN: 2450-5471.
    Detail | WWW | Full text in the Digital Library

    HUTAŘ, P.; POKORNÝ, P.; PODUŠKA, J.; FAJKOŠ, R.; NÁHLÍK, L. Effect of residual stresses on the fatigue lifetime of railway axle. Procedia Structural Integrity, 2017, vol. 4, no. 2017, p. 42-47. ISSN: 2452-3216.
    Detail | WWW

    HUTAŘ, P.; PODUŠKA, J.; ŠMÍD, M.; KUBĚNA, I.; CHLUPOVÁ, A.; NÁHLÍK, L.; POLÁK, J.; KRUML, T. Short fatigue crack behaviour under low cycle fatigue regime. INTERNATIONAL JOURNAL OF FATIGUE, 2017, vol. 103, no. October 2017, p. 207-215. ISSN: 0142-1123.
    Detail | WWW

    PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; SADÍLEK, J.; FRANK, A.; PINTER, G.; NÁHLÍK, L. The Effect of Residual Stress on the Process of Crack Growth Rate Determination in Polymer Pipes. Solid State Phenomena, 2017, vol. 258, no. 2017, p. 174-177. ISSN: 1012-0394.
    Detail | WWW

    MAJER, Z.; NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; BERMEJO, R. Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites. In MSMF8. International Conference on Materials Structure and Micromechanics of Fracture. Solid State Phenomena. 8. Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 178-181. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
    Detail | WWW

    MAJER, Z.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; PLETZ, M.; BERMEJO, R.; NÁHLÍK, L. Residual Lifetime Determination of Low Temperature Co-Fired Ceramics. In Advances in Fracture and Damage Mechanics XV. Key Engineering Materials (web). Zürrich, Switzerland: Trans Tech Publications Inc., 2017. p. 266-269. ISBN: 978-3-03835-716-2. ISSN: 1662-9795.
    Detail | WWW

  • 2016

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; MÁŠA, B.; HUTAŘ, P. A failure scenario of ceramic laminates with strong interfaces. Engineering Fracture Mechanics, 2016, no. 167, p. 56-67. ISSN: 0013-7944.
    Detail | WWW

    POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of variable stress ratio during train operation on residual fatigue lifetime of railway axles. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3585-3592. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Role of Residual Stresses in Particulate Composite with Glass Matrix. Key Engineering Materials (print), 2016, vol. 665, no. 1, p. 173-176. ISSN: 1013-9826.
    Detail | WWW

    POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Residual fatigue lifetime estimation of railway axles for various loading spectra. Theoretical and Applied Fracture Mechanics, 2016, no. 81, p. 25-32. ISSN: 0167-8442.
    Detail | WWW

    POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Influence of extension of load spectrum on estimation of residual fatigue lifetime of railway axle. Solid State Phenomena, 2016, vol. 258, no. -, p. 607-610. ISSN: 1012-0394.
    Detail | WWW

    PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; FRANK, A.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Residual stress in polyethylene pipes. POLYMER TESTING, 2016, vol. 54, no. 1, p. 288-295. ISSN: 0142-9418.
    Detail | WWW

    MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. Polymer Engineering & Science, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634.
    Detail | WWW

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P.; POKORNÝ, P.; MAJER, Z. Influence of residual stresses and particle properties on mechanical response of the material in particulate ceramic composites. Key Engineering Materials (print), 2016, vol. 1, no. 713, p. 212-215. ISSN: 1013-9826.
    Detail | WWW

    HUTAŘ, P.; PODUŠKA, J.; CHLUPOVÁ, A.; ŠMÍD, M.; KRUML, T.; NÁHLÍK, L. Description of short fatigue crack propagation under low cycle fatigue regime. Procedia Structural Integrity, 2016, vol. 2, no. 1, p. 3010-3017. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

  • 2015

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Influence of the V-notch opening angle on critical applied force values Influence of the V-notch opening angle on critical applied force values for the crack initiation from the sharp V-notch. Key Engineering Materials (print), 2015, vol. 627, no. 2015, p. 165-168. ISSN: 1013-9826.
    Detail

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of stepwise crack propagation in ceramic laminates with strong interfaces. Frattura ed Integrita Strutturale, 2015, vol. 9, no. 34, p. 116-124. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    MAJER, Z.; NÁHLÍK, L.; MALÍKOVÁ, L. Particulate Composite Damage: The Influence of Particle Shape on Crack Path. Key Engineering Materials (print), 2015, vol. 662, no. 1, p. 77-80. ISSN: 1013-9826.
    Detail | WWW

    POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of different crack propagation rate descriptions on the residual fatigue lifetime of railway axles. Key Engineering Materials (print), 2015, vol. 627, no. 627, p. 469-472. ISSN: 1013- 9826.
    Detail

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Fracture Mechanics Description of Crack Propagation in Ceramic Laminates. APPLIED MECHANICS 2015 – Book of Abstracts. Thákurova 1, Praha 6: Česká technika – Nakladatelství ČVUT, 2015. p. 69-70. ISBN: 978-80-01-05708- 7.
    Detail

    MAJER, Z.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Point load effect determination for different pressure pipe SDR series. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2015. p. 373-376. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
    Detail

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Description of strengthening mechanism in layered ceramic composites. Key Engineering Materials (print), 2015, vol. XIV, no. 665, p. 93-96. ISSN: 1013-9826.
    Detail

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Estimation of crack behaviour in the ceramic laminate with strong interfaces. ICSMA 17 Book of Abstracts. Brno: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Brno, Czech Republic, 2015. p. 288-288. ISBN: 978-80-87434-07- 9.
    Detail

    POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Influence of Threshold Values on Residual Fatigue Lifetime of Railway Axles under Variable Amplitude Loading. Procedia Engineering, 2015, vol. 101, no. 1, p. 380-385. ISSN: 1877-7058.
    Detail | WWW | Full text in the Digital Library

    PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. The Effect of Specimen Size on the Determination of Residual Stress in Polymer Pipe Wall. In Advances in Fracture and Damage Mechanics XIII. Key Engineering Materials (print). Key Engineering Materials. Switzerland: TTP, 2015. p. 141-144. ISBN: 978-3-03835-235-8. ISSN: 1013-9826.
    Detail

  • 2014

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Critical applied stresses for a crack initiation from a sharp V-notch. Frattura ed Integrita Strutturale, 2014, vol. 8, no. 30, p. 55-61. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. Comparison of Different Load Spectra on Residual Fatigue Lifetime of Railway Axle. Procedia Engineering, 2014, vol. 74, no. 1, p. 313-316. ISSN: 1877-7058.
    Detail | WWW | Full text in the Digital Library

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P.; MAJER, Z. Critical Value for Crack Propagation from Sharp V- notch. Key Engineering Materials (print), 2014, vol. 592- 593, no. 1, p. 177-180. ISSN: 1013- 9826.
    Detail

    MAJER, Z.; NÁHLÍK, L. Influence of Interphase Imperfection on Micro-Crack Behavior in Polymer Composites Filled by Rigid Particles. In Local Mechanical Properties IX. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 194-197. ISBN: 978-3-03785-876-9. ISSN: 1013-9826.
    Detail

    MAJER, Z.; ZOUHAR, M.; ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P. Pressure pipe damage: Numerical estimation of point load effect II. In Advances in Fracture and Damage Mechanics XII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 533-536. ISBN: 978-3-03785-830-1. ISSN: 1013-9826.
    Detail

    NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P.; MATUŠEK, P. Fatigue crack propagation in steels for railway axles. Key Engineering Materials (print), 2014, vol. 2014, no. 592- 593, p. 254-257. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Influence of crack retardation on fatigue crack propagation in steels for railway axles. In 11th International Fatigue Congress. Zurich: 11th International Fatigue Congress, 2014. p. 351-356. ISBN: 978-3-03835-008- 8.
    Detail

    MAJER, Z.; MARCIÁN, P.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 445-448. ISBN: 978-3-03785-934-6. ISSN: 1013-9826.
    Detail

    MAJER, Z.; NÁHLÍK, L. NUMERICAL ESTIMATION OF MICRO-CRACK PATHS IN POLYMER PARTICULATE COMPOSITE. In Engineering Mechanics 2014. 1. 2014. p. 376-379. ISBN: 978-80-214-4871-1.
    Detail

    MAJER, Z.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Particulate Composite Damage: Numerical Estimation of Micro-Crack Paths. In Local Mechanical Properties X. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 261-264. ISBN: 978-3-03835-062-0. ISSN: 1013-9826.
    Detail

    PODUŠKA, J.; KUČERA, J.; HUTAŘ, P.; ŠEVČÍK, M.; KŘIVÁNEK, J.; SADÍLEK, J.; NÁHLÍK, L. Residual stress distribution in extruded polypropylene pipes. POLYMER TESTING, 2014, vol. 2014, no. 40, p. 88-98. ISSN: 0142-9418.
    Detail

    ŠTEGNEROVÁ, K.; NÁHLÍK, L.; HUTAŘ, P. Crack initiation from sharp V- notch tip in the case of out of plane bended specimen. Plzeň: Katedra mechaniky Fakulty aplikovaných věd Západočeské univerzity v Plzni, 2014. p. 1-2.
    Detail

    POKORNÝ, P.; HUTAŘ, P.; NÁHLÍK, L. Fatigue crack propagation in railway axles. 2014. p. 1-2.
    Detail

    POKORNÝ, P.; NÁHLÍK, L.; HUTAŘ, P. The effect of threshold value on the residual fatigue lifetime of railway axles. In ENGINEERING MECHANICS 2014. 2014. p. 496-499. ISBN: 978-80-214-4871-1.
    Detail

    MAJER, Z.; PLETZ, M.; KRAUTGASSER, C.; NÁHLÍK, L.; HUTAŘ, P.; BERMEJO, R. Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites. Procedia Materials Science, 2014, vol. 3, no. 1, p. 2071-2076. ISSN: 2211-8128.
    Detail

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. ESTIMATION OF CRITICAL STRESS VALUES FOR CRACK INITIATION FROM SHARP V-NOTCHES. In Engineering Mechanics 2014. 1. Brno: ÚMTMB, FSI VUT v Brně, 2014. p. 412-415. ISBN: 978-80-214-4871-1.
    Detail

    MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate. Key Engineering Materials (print), 2014, vol. 2014, no. 592- 593, p. 405-408. ISSN: 1013- 9826.
    Detail

  • 2013

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; SEITL, S. The effect of constraint level on a crack path. ENGINEERING FAILURE ANALYSIS, 2013, vol. 2013 (29), no. 1, p. 83-92. ISSN: 1350- 6307.
    Detail

    MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Particulate Composite with a Hyperelastic Matrix. Key Engineering Materials (print), 2013, vol. 525- 526, no. xxx, p. 25-28. ISSN: 1013- 9826.
    Detail

    POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. Effects of variable loading on residual fatigue life of the railway wheelset. Key Engineering Materials (print), 2013, vol. 2014, no. 577- 578, p. 121-124. ISSN: 1013- 9826.
    Detail

    PETRÁČKOVÁ, K.; NÁHLÍK, L.; TRUHLÁŘ, M.; KUBĚNA, I.; HUTAŘ, P. APPLICATION OF FEM TO ESTIMATE OF MECHANICAL PROPERTIES OF THIN LAYERS. 15th International Conference, APPLIED MECHANICS 2013. 2013.
    Detail

    NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. INFLUENCE OF THE INTERFACE ON THE APPARENT FRACTURE TOUGHNESS AND CRACK PROPAGATION DIRECTION IN LAYERED CERAMIC COMPOSITES. 2013. p. 7837-7838. ISBN: 978-0-9696797-1- 4.
    Detail

    HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; ŠEVČÍK, M.; MÁŠA, B. Multilayer polymer pipes failure assessment based on a fracture mechanics approach. ENGINEERING FAILURE ANALYSIS, 2013, vol. 33, no. 1, p. 151-162. ISSN: 1350- 6307.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. Pressure pipe damage: Numerical estimation of point load effect. Key Engineering Materials (print), 2013, vol. 525- 526, no. 1, p. 177-180. ISSN: 1013- 9826.
    Detail

    MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Particulate Composite Materials: Numerical Modelling of Cross- linked Polymer Reinforced by Alumina Based Particles. MECHANICS OF COMPOSITE MATERIALS, 2013, vol. 2013 (49), no. 4, p. 421-428. ISSN: 0191- 5665.
    Detail

    POKORNÝ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; HUTAŘ, P. DETERMINATION OF RESIDUAL FATIGUE LIFE OF RAILWAY WHEELSET. 15th International Conference, APPLIED MECHANICS 2013. 2013.
    Detail

    ŠEVČÍK, M.; PODUŠKA, J.; NÁHLÍK, L.; HUTAŘ, P.; KUČERA, J. Inaccuracy in Residual Stress Estimation and Its Influence on the Residual Lifetime of Polymer Pipes. Key Engineering Materials (print), 2013, vol. 2013, no. 592- 593, p. 165-168. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical values for crack propagation from sharp V- notch. Plzeň: Západočeská univerzita, 2013. p. 1-2.
    Detail

  • 2012

    NÁHLÍK, L.; HUTAŘ, P.; DUŠKOVÁ, M.; DUŠEK, K.; MÁŠA, B. Numerical estimation of the macroscopic stress- strain curve of a particulate composite with crosslinked polymer matrix. MECHANICS OF COMPOSITE MATERIALS, 2012, vol. 47, no. 6, p. 627-634. ISSN: 0191- 5665.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack shape prediction based on the stress singularity exponent. Key Engineering Materials (print), 2012, vol. 488- 489, no. -, p. 178-181. ISSN: 1013- 9826.
    Detail

    TRUHLÁŘ, M.; KRUML, T.; KUBĚNA, I.; PETRÁČKOVÁ, K.; NÁHLÍK, L. Determination of mechanical properties from microcompression test. In Sborník Engineering Mechanics 2012. 2012. p. 1435-1440. ISBN: 978-80-86246-40- 6.
    Detail

    NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; MALÍKOVÁ, L. Determination of crack propagation direction using approach based on generalized linear elastic fracture. In The 4th International Conference on Crack Paths (CP2012). 2012. p. 1065-1072. ISBN: 9788895940441.
    Detail

    PETRÁČKOVÁ, K.; KUBĚNA, I.; TRUHLÁŘ, M.; NÁHLÍK, L.; KRUML, T. Estimation of mechanical properties of thin Al surface layer. In 14th International Conference Applied Mechanics 2012. 2012. p. 117-120. ISBN: 978-80-261-0097- 3.
    Detail

    MÁŠA, B.; ZOUHAR, M.; NÁHLÍK, L. Vliv reziduálních napětí v keramickém laminátu na šíření trhliny. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů AV ČR, 2012. p. 53-58. ISBN: 978-80-87434-06- 2.
    Detail

    ŠEVČÍK, M.; NÁHLÍK, L.; HUTAŘ, P.; ZOUHAR, M.; MÁŠA, B. Modelling of fatigue failure of gears with thin rim. 18th International Conference Engineering Mechanics 2012. 2012. p. 1309-1310.
    Detail

    NEZBEDOVÁ, E.; HUTAŘ, P.; ZOUHAR, M.; KNÉSL, Z.; SADÍLEK, J.; NÁHLÍK, L. The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades. POLYMER TESTING, 2012, vol. 32, no. 1, p. 106-114. ISSN: 0142- 9418.
    Detail

    ZOUHAR, M.; NÁHLÍK, L.; HUTAŘ, P.; ŠEVČÍK, M.; KNÉSL, Z. The effect of critical distance on stability conditions for a crack at the interface between two polymer materials. Engineering Mechanics, 2012, vol. 19, no. 2/ 3, p. 155-164. ISSN: 1802- 1484.
    Detail

    MAJER, Z.; NÁHLÍK, L. Micro- Crack Propagation in Particulate Composite with Different Types of Matrix. Applied Mechanics and Materials, 2012, vol. 245, no. 1, p. 138-143. ISSN: 1660- 9336.
    Detail

    MAJER, Z.; NÁHLÍK, L.; HUTAŘ, P. The Estimation of Micro- crack Behavior in Polymer Particulate Composite with Soft Interphase. Advanced Materials Research, 2012, vol. 482- 484, no. 1, p. 1660-1663. ISSN: 1022- 6680.
    Detail

    MAJER, Z.; NÁHLÍK, L. MICRO-CRACK BEHAVIOUR IN POLYMER MATRIX OF PARTICULATE COMPOSITE: INFLUENCE OF NON- LINEAR MATRIX. Chemické listy, 2012, vol. 106, no. 1, p. 472-473. ISSN: 0009- 2770.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L. Numerical estimation of the fatigue crack front shape for a specimen with finite thickness. INTERNATIONAL JOURNAL OF FATIGUE, 2012, vol. 39, no. 1, p. 75-80. ISSN: 0142- 1123.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; KNÉSL, Z.; NÁHLÍK, L.; ZOUHAR, M. Estimation of the critical configuration of a crack arrested at the interface between two materials. COMPUTATIONAL MATERIALS SCIENCE, 2012, vol. 64, no. 5, p. 225-228. ISSN: 0927- 0256.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; ZOUHAR, M.; NÁHLÍK, L.; KNÉSL, Z.; KUČERA, J. A Simple Method for Estimation of Residual Stresses Influence on Plastic Pipes Lifetime Prediction. In Polymeric Materials 2012. 2012. p. 134-134. ISBN: 978-3-86829-517- 7.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; KUČERA, J.; ZOUHAR, M.; LUKY, R.; NÁHLÍK, L. Effect of the residual stresses on the slow crack growth. XVI International Plastic Pipes Conference 2012. 2012.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. Proceedings of the 4th International Conference on CRACK PATHS (CP 2012), 2012, vol. 1, no. 1, p. 489-496. ISSN: 2281- 1060.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; ZOUHAR, M.; NÁHLÍK, L.; KUČERA, J. The effect of residual stresses on crack shape in polymer pipes. The Fourth International Conference on Crack Paths 2012. 2012. p. 73-73.
    Detail

    ŠEVČÍK, M.; ZOUHAR, M.; MÁŠA, B.; HUTAŘ, P.; NÁHLÍK, L. On a critical geometry of a crack arrested at a bimaterail interface. In Conference Proceedings of the 14th International Conference APPLIED MECHANICS. Plzeň: Západočeská univerzita v Plzni, 2012. p. 1-4. ISBN: 978-80-261-0097- 3.
    Detail

    HUTAŘ, P.; ZOUHAR, M.; NEZBEDOVÁ, E.; SADÍLEK, J.; ŽÍDEK, J.; NÁHLÍK, L.; KNÉSL, Z. Constraint effect on the slow crack growth in polyethylene. International Journal of Structural Integrity, 2012, vol. 3, no. 2, p. 118-126. ISSN: 1757- 9864.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Basic modes of crack propagation through an interface in polymer layered structure. Key Engineering Materials (print), 2012, vol. 488- 499, no. 9, p. 162-165. ISSN: 1013- 9826.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; LACH, R.; KNÉSL, Z.; GRELLMANN, W. Crack growth modeling in a specimen with polymer weld. Key Engineering Materials (print), 2012, vol. 488- 489, no. -, p. 158-161. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Macroscopic Behavior and Damage of a Particulate Composite with a Crosslinked Polymer Matrix. In Mechanics and Properties of Composed Materials and Structures. 1. Berlín, Německo: Springer- Verlag Berlin Heidelberg, 2012. p. 117-127. ISBN: 978-3-642-31497- 1.
    Detail

  • 2011

    HUTAŘ, P.; NÁHLÍK, L.; MAJER, Z.; KNÉSL, Z. The effect of an interphase on micro- crack behaviour in polymer composites. In Computational Modelling and Advanced Simulations. Computational Methods in Applied Sciences. Dordrecht: Springer, 2011. p. 83-97. ISBN: 978-94-007-0316- 2.
    Detail

    ZOUHAR, M.; VALLET, L.; HUTAŘ, P.; NÁHLÍK, L. Life time estimation of the multilayer plastic pipes. Key Engineering Materials (print), 2011, vol. 452- 453, no. -, p. 33-36. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; MÁŠA, B.; HUTAŘ, P. Numerical Modeling of Macroscopic Behavior of Particulate Composite with Crosslinked Polymer Matrix. Key Engineering Materials, 2011, vol. 465, no. xxx, p. 129-132. ISSN: 1013- 9826.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Damage of multilayer polymer materials under creep loading. Key Engineering Materials, 2011, vol. 2011, no. 465, p. 153-156. ISSN: 1013- 9826.
    Detail

    MÁŠA, B.; NÁHLÍK, L.; HUTAŘ, P. Numerical Modelling of Damage of Particulate Composite with Polymer Matrix. In COMPUTATIONAL MECHANICS 2011, EXTENDED ABSTRACTS. 2011. p. 1-2. ISBN: 978-80-261-0027- 0.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of polymer pipe weld geometry on creep lifetime. Key Engineering Materials (print), 2011, vol. 465, no. -, p. 175-178. ISSN: 1013-9826.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; SEITL, S.; KRUML, T.; POLÁK, J. Fatigue crack propagation rate in EUROFER 97 estimated using small specimens. Key Engineering Materials (print), 2011, vol. 452- 453, no. -, p. 325-328. ISSN: 1013-9826.
    Detail

    NÁHLÍK, L.; ZOUHAR, M.; ŠEVČÍK, M.; SEITL, S.; MAJER, Z. 13th Applied mechanics 2011 conference proceeding. 13th Applied mechanics 2011 conference proceeding. 2011. ISBN: 978-80-87434-03- 1.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Crack behavior in a welded polyolefin pipe. MECHANICS OF COMPOSITE MATERIALS, 2011, vol. 47, no. 3, p. 263-270. ISSN: 0191-5665.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Assessment of crack behaviour in a polymer pipe weld. Computational Mechanics 2011 - extended abstract. Plzeň: Západočeská univerzita, 2011. p. 1-2. ISBN: 978-80-261-0027- 0.
    Detail

    MÁŠA, B.; ŠEVČÍK, M.; NÁHLÍK, L. Numerické modelování porušování částicového kompozitu s polymerní matricí. In Víceúrovňový design pokrokových materiálů 2011. Brno: Ústav fyziky materiálů AV ČR, 2011. p. 87-94. ISBN: 978-80-87434-04- 8.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; PINTER, G.; FRANK, A.; MITEV, I. A numerical methodology for lifetime estimation of HDPE pressure pipes. Engineering Fracture Mechanics, 2011, vol. 78, no. 17, p. 3049-3058. ISSN: 0013-7944.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L. The influence of point load on creep crack growth in polyethylene pipe. In Computational Mechanics 2011. Plzeň: University of West Bohemia Pilsen, 2011. p. 1-2. ISBN: 978-80-261-0027- 0.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Effect of the time dependent material properties on the crack behaviour in the interface of two polymeric materials. MECHANICS OF COMPOSITE MATERIALS, 2011, vol. 47, no. 2, p. 203-210. ISSN: 0191- 5665.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Crack stability condition at the interface between two polymer materials. In Applied mechanics 2011 conference proceedings. 2011. p. 247-250. ISBN: 978-80-87434-03- 1.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Generalized linear elastic fracture mechanics: an application to a crack touching the bimaterial interface. Key Engineering Materials, 2011, vol. 452- 453, no. XXX, p. 445-448. ISSN: 1013- 9826.
    Detail

  • 2010

    HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; KNÉSL, Z. Fatigue crack propagation in thin structures. Key Engineering Materials, 2010, vol. 417- 418, no. xxx, p. 257-260. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; BERMEJO, R. Prediction of crack propagation in layered ceramics with strong interfaces. Engineering Fracture Mechanics, 2010, vol. 77, no. 11, p. 2192-2199. ISSN: 0013- 7944.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of a free surface on fatigue crack behaviour. INTERNATIONAL JOURNAL OF FATIGUE, 2010, vol. 32, no. 8, p. 1265-1269. ISSN: 0142- 1123.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Crack propagation through the interface between two polymer materials. In Applied and Computational Mechanics - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, 2010. p. 1-2. ISBN: 978-80-7043-919- 7.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Effect of the free surface on crack behaviour in cracked graded structures. In 26th conference Computational Mechanics 2010 - Extended Abstracts. University of West Bohemia, Plzeň: University of West Bohemia, Plzeň, 2010. p. 1-2. ISBN: 978-80-7043-919- 7.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; ZOUHAR, M.; SEITL, S.; KNÉSL, Z.; FERNÁNDEZ-CANTELI, A. Fracture mechanics of the three-dimensional crack front: vertex singularity versus out of plain constraint descriptions. Procedia Engineering, 2010, vol. 2, no. 1, p. 2095-2102. ISSN: 1877- 7058.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Stress distribution description in the vicinity of the crack front in the case of thin specimens. In 12th International Scientific Conference Applied Mechanics 2010. Liberec: TU Liberec, 2010. p. 119-122. ISBN: 978-80-7372-586-0.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Description of the stress distribution around the crack front in the case of thin structures. Bulletin of Applied Mechanics, 2010, vol. 6, no. 22, p. 30-33. ISSN: 1801-1217.
    Detail

    ZOUHAR, M.; HUTAŘ, P.; NÁHLÍK, L. Vliv časově proměnných vlastností materiálů a způsobu zatěžování na lomové parametry bi-materiálového tělesa. In SEMDOK 2010, 15th International of PHD. students seminar. Žilina: 2010. p. 247-250. ISBN: 978-80-554-0157-7.
    Detail

  • 2009

    NÁHLÍK, L. Zobecnění lineární lomové mechaniky na případ trhliny šířící se přes rozhraní dvou materiálů. Brno: 2009.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack propagation in the vicinity of the interface between two elastic materials. In Damage and Fracture Mechanics. Failure Analysis of Engineering Materials and Structures. Dordrecht, Nizozemí: Springer, 2009. p. 255-264. ISBN: 978-90-481-2668- 2.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 46, no. 3, p. 614-620. ISSN: 0927- 0256.
    Detail

    HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. THE INFLUENCE OF PARTICLE SIZE ON THE FRACTURE TOUGHNESS OF PP- BASED PARTICLE COMPOSITE. MECHANICS OF COMPOSITE MATERIALS, 2009, vol. 45, no. 3, p. 281-286. ISSN: 0191- 5665.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of the interface in layered materials. Applied andComputational Mechanics, 2009, vol. III., no. 1., p. 195-204. ISSN: 1802-680X.
    Detail | WWW | Full text in the Digital Library

    HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on fatigue crack behavior. COMPUTATIONAL MATERIALS SCIENCE, 2009, vol. 45, no. 3, p. 653-657. ISSN: 0927- 0256.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. An evaluation of the stress intensity factor in functionally graded materials. Applied andComputational Mechanics, 2009, vol. 3, no. 2, p. 401-410. ISSN: 1802-680X.
    Detail

    HUTAŘ, P.; ŠESTÁKOVÁ, L.; KNÉSL, Z.; NEZBEDOVÁ, E.; NÁHLÍK, L. Special fracture mechanics specimens for multilayer plastic pipes testing. POLYMER TESTING, 2009, vol. 28, no. 8, p. 785-792. ISSN: 0142- 9418.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; ŠEVČÍK, M.; KNÉSL, Z.; NEZBEDOVÁ, E. A fracture mechanics assessment of surface cracks existing in protective layers of multilayer composite pipes. COMPOSITE STRUCTURES, 2009, vol. 92, no. 5, p. 1120-1125. ISSN: 0263- 8223.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Crack behaviour in laminar ceramics with strong interfaces. Key Engineering Materials (print), 2009, vol. 417- 418, no. 417- 418, p. 301-304. ISSN: 1013- 9826.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Evaluation of stress intensity factor in FGM. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.
    Detail

    HUTAŘ, P.; SEITL, S.; NÁHLÍK, L.; ŠEVČÍK, M.; KNÉSL, Z. Stress distribution along the 3D crack front. Computational Mechanics 2009. Plzeň: Západočeská univerzita, 2009. p. 1-2. ISBN: 978-80-7043-824- 4.
    Detail

    ŠEVČÍK, M.; HUTAŘ, P.; NÁHLÍK, L. Simulace šíření trhliny ve svaru polyolefínových trubek. In Víceúrovňový design pokrokových materiálů. Brno: 2009. p. 45-52. ISBN: 978-80-254-6070- 2.
    Detail

    HUTAŘ, P.; ŠEVČÍK, M.; NÁHLÍK, L.; MITEV, I.; FRANK, A.; PINTER, G. Numerical simulation of the failure behavior of PE pressure pipes with additional loads. In 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009. United States: Society of Plastics Engineers, Inc., 2009. p. 2163-2168. ISBN: 1-61567-327- X.
    Detail

  • 2008

    NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Transverse cracking of layered structures: evaluation of fatigue crack propagation. Materials Science Forum, 2008, vol. 567- 568, no. xxx, p. 221-224. ISSN: 0255- 5476.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of apparent fracture toughness of ceramic laminates based on generalized strain energy density factor. In 17th European Conference on Fracture. Brno: VUTIUM Brno, 2008. p. 1522-1529. ISBN: 9781617823190.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Numerical investigation of stress singularities in cracked bimaterial body. Key Engineering Materials, 2008, vol. 385- 387, no. 385- 387, p. 125-128. ISSN: 1013- 9826.
    Detail

    NÁHLÍK, L.; KNÉSL, Z.; KLUSÁK, J. CRACK INITIATION CRITERIA FOR SINGULAR STRESS CONCENTRATIONS, Part III: An Application to a Crack Touching a Bimaterial Interface. Engineering Mechanics, 2008, vol. 15, no. 2, p. 99-114. ISSN: 1802- 1484.
    Detail

    KNÉSL, Z.; HUTAŘ, P.; MAJER, Z.; NÁHLÍK, L. PARTICLE SHAPE EFFECT ON FRACTURE TOUGHNESS OF PP-BASED PARTICULATE COMPOSITE: ROLE OF THE INTERPHASE. Les Diablerets: Elsevier, 2008. p. 1 (1 s.).
    Detail

    HUTAŘ, P.; MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; KNÉSL, Z. The influence of particle size on the fracture toughness of a PP- based particle composite. Riga, Latvia: Institute of Polymer Mechanics, University of Latvia, 2008. p. 112-112.
    Detail

    MAJER, Z.; ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Numerical analysis of a crack approaching the interface of two dissimilar materials. Properties, Procesing, Modification, Application of Polymeric Materials. Halle/Saale, Germany: 2008. p. PI- 68 ( p.)ISBN: 978-3-940744-17- 3.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Estimation of the critical stress for failure of layered composite materials. IWCMM18. Beijing, China: Beijing Institute of Technology, 2008. p. 103-103.
    Detail

    HUTAŘ, P.; MAJER, Z.; KNÉSL, Z.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; PROD'HOMME, G. Computational estimation of micro- crack behaviour in polypropylene copolymer. Barcelona, Spain (Venice, Italy): 2008. p. 1-2.
    Detail

    MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The influence of loading direction on micro- crack behaviour in polymer composite. Applied andComputational Mechanics, 2008, vol. 2, no. 2, p. 285-290. ISSN: 1802- 680X.
    Detail

    KNÉSL, Z.; NÁHLÍK, L.; BAREŠ, P. Crack initiation kriteria for singular stress concentrators, Part IV: Applications to fracture of coated structures. Engineering Mechanics. Engineering Mechanics, 2008, vol. 15, no. 4, p. 263-270. ISSN: 1802- 1484.
    Detail

    HUTAŘ, P.; NÁHLÍK, L. Fatigue crack shape prediction based on vertex singularity. Applied andComputational Mechanics, 2008, vol. 2, no. 1, p. 45-53. ISSN: 1802- 680X.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. The effect of the singularity induced by the free surface on fatigue crack growth in thin structures. Key Engineering Materials, 2008, vol. 385- 387, no. 385- 387, p. 317-320. ISSN: 1013- 9826.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z.; SEITL, S. The influence of vertex singularities on fatigue crack shape. In ECF17 - European Conference on Fracture 17. Brno: VUTIUM, 2008. p. 1060-1066. ISBN: 9781617823190.
    Detail

    ŠESTÁKOVÁ, L.; HUTAŘ, P.; FIEDLER, L.; NÁHLÍK, L. K-kalibrace nehomogenních zkušebních těles typu C. In 10th International Scientific Conference - Applied Mechanics 2008 (full texts of paper and extended abstracts). Gliwice, Poland: Wydawnictwo Katedry Mechaniki Stosowanej, 2008. p. 24-31. ISBN: 978-83-60102-49-7.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P.; KNÉSL, Z. Crack propagation in the vicinity of interface between two elastic materials. 5th International Conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets, Switzerland: 2008. p. P031 ( p.)
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Materials Science Forum, 2008, vol. 567- 568, no. 567- 568, p. 225-228. ISSN: 0255- 5476.
    Detail

  • 2007

    NÁHLÍK, L.; HUTAŘ, P. INFLUENCE OF BI- MATERIAL INTERFACE AND PLASTICITY INDUCED CRACK CLOSURE ON THRESHOLD VALUES. In Engineering mechanics 2007. Praha: ÚT AV ČR, 2007. p. 1-8. ISBN: 978-80-87012-06- 2.
    Detail

    MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. ESTIMATION OF CRITICAL VALUES FOR CRACK PROPAGATION FROM SHARP V- NOTCH. In Engineering Mechanics 2007, Book of Extended Abstracts. 1. Praha: Institute of Thermomechanics, Acade,y of Science of the Czech Republic, v. , v. , v., 2007. p. 167-168. ISBN: 978-80-87012-06- 2.
    Detail

    KLUSÁK, J.; KNÉSL, Z.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part II: Stability of sharp and bi- material notches. Engineering Mechanics, 2007, vol. 14, no. 6, p. 409-423. ISSN: 1802- 1484.
    Detail

    KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L. EFFECT OF THE INTERFACE ON FRACTURE TOUGHNESS OF PARTICLE REINFORCED COMPOSITES. In ICCE-15 Fifteenth annual international conference on composites/ nano engineering. New Orleans: University of New Orleans, 2007. p. 1-2.
    Detail

    NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. The Influence of Loading Ratio on Fatigue Crack Propagation Through a Bi- material Interface. Key Engineering Materials (print), 2007, vol. 348- 349, no. 348- 349, p. 317-320. ISSN: 1013- 9826.
    Detail

    KNÉSL, Z.; HUTAŘ, P.; NÁHLÍK, L.; NEZBEDOVÁ, E.; VLACH, B. ROLE OF PARTICLE SIZE AND FILLER MATRIX ADHESION ON STRESS STATE IN TERMOPLASTIC COMPOSITES. In Computational modeling and experiments of the composite materials with micro- and nano structure. Lipt. Mikuláš: 2007. p. 1-8. ISBN: 978-80-8040-321- 8.
    Detail

    NÁHLÍK, L.; ŠESTÁKOVÁ, L.; HUTAŘ, P. Estimation of the crack propagation direction of a crack touching the interface between two elastic materials. Abstract Booklet MSMF- 5. Brno: VUTIUM Brno, 2007. p. 74-74. ISBN: 978-80-214-3434- 9.
    Detail

    HUTAŘ, P.; NÁHLÍK, L.; ŠESTÁKOVÁ, L.; KNÉSL, Z. Quantification of the influence of vertex singularities on crack behaviour. IWCMM17- Paris Book of Abstracts. Paris, France: Centre des Matériaux, 2007. p. 139-139. ISBN: -.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Influence of Bi- material Interface on Crack Propagation Direction in Multilayer Composite. In Engineering mechanics 2007. Svratka, CR: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i., Prague, 2007. p. 269-270. ISBN: 978-80-87012-06- 2.
    Detail

    MAJER, Z.; HUTAŘ, P.; NÁHLÍK, J. INFLUENCE OF THE SINGULARITY INDUCED BY THE FREE SURFACE ON BEHAVIOUR OF THIN BODY WITH A V- NOTCH. In Applied Mechanics 2007 - Book of Extended Abstract. Ostrava: VŠB - Technical University of Ostrava, 2007. p. 155-156. ISBN: 978-80-248-1389- 9.
    Detail

    MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L. Chování trhlin v tenkých ochranných vrstvách. In SEMDOK 2007. Žilina- Súlov: EDIS, 2007. p. 84-87. ISBN: 978-80-8070-639- 5.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P.; KNÉSL, Z. Fracture mechanics parameters of multilayer pipes. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 299-306. ISSN: 1802-680X.
    Detail | WWW | Full text in the Digital Library

    MAJER, Z.; HUTAŘ, P.; NÁHLÍK, L.; KNÉSL, Z. Influence of particles- matrix interphase on stress distribution in particulate composite with polymer matrix. Applied andComputational Mechanics, 2007, vol. 1, no. 1, p. 143-148. ISSN: 1802- 680X.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Delaminace ochranné vrstvy způsobená povrchovou trhlinou. In SEMDOK 2007. Žilina - Súlov: EDIS, 2007. p. 105-108. ISBN: 978-80-8070-639- 5.
    Detail

    ŠESTÁKOVÁ, L.; NÁHLÍK, L.; HUTAŘ, P. Vliv rozhraní vrstevnatého kompozitu na směr šíření trhliny. In 9th International Scientific Conference Applied Mechanics 2007, Book of Extended Abstracts. Ostrava: VŠB - Technická univerzita Ostrava, 2007. p. 205-206. ISBN: 978-80-248-1389- 9.
    Detail

    KNÉSL, Z.; KLUSÁK, J.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part I: A universal assessment of singular stress concentrations. Engineering Mechanics, 2007, vol. 14, no. 6, p. 399-408. ISSN: 1802- 1484.
    Detail

  • 2006

    KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Influence of interfactial transition zone of cement paste - aggregate on crack propagation: finite element modelling. In Inženýrská mechanika 2006. Svratka, ČR: 2006. p. 156-157. ISBN: 80-86246-27- 2.
    Detail

    ŠESTÁKOVÁ, L., MAJER, Z., NÁHLÍK, L., KNÉSL, Z. Numerical Analysis of a Surface Crack in Protective Layers. In Engineering mechanics 2006. Svratka, CR: Institute of Theoretical and Applied Mechanics Academy of Sciences of the Czech Republic, Prague, 2006. p. 348-349. ISBN: 80-86246-27- 2.
    Detail

  • 2005

    NÁHLÍK, L.; KERŠNER, Z.; KNÉSL, Z. Influence of degradation of hardened cement paste on fracture behaviour of concrete. In Inženýrská mechanika 2005. Svratka, Česká Republika: 2005. p. 229 ( p.)ISBN: 80-85918-93- 5.
    Detail

    KNÉSL, Z.; NÁHLÍK, L.; BAREŠ, P. Failure behavior of coated materials. In 10 th International Conference on Numerical Methods in Continuum Mechanics. Žilina: University of Zilina, 2005. p. 47-48. ISBN: 80-969165-4- 8.
    Detail

    KNÉSL, Z.; BAREŠ, P.; NÁHLÍK, L. EVALUATION OF THE FATIGUE THRESHOLD OF COATED STRUCTURES. In ICCE-12 Twelth Annual International Conference on Composites/ Nano Engineering. Tenerife, Canary Islands: 2005. p. 153-154.
    Detail

    HOUFEK, L., ŠLECHTOVÁ, M., NÁHLÍK, L. Aplikovaná mechamika 2005. Aplikovaná Mechanika 2005. Brno: VUT, FSI ÚMTMB, 2005. p. 1 ( p.)ISBN: 80-214-2373- 0.
    Detail

  • 2004

    KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Interaction of crack and aggregate in concrete. In Engineering mechanics 2004. Svratka: Institute of Thermomechanics Academy of Sciences of Czech Republic, 2004. p. 137 ( p.)ISBN: 80-85918-88- 9.
    Detail

  • 2003

    KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. Concrete as a two phase material: statistical, sensitivity modelling of failure. In Enginering Mechanics 2003. Svratka, Česká Republika: 2003. p. 1 ( p.)
    Detail

    NÁHLÍK, L.; KERŠNER, Z.; KNÉSL, Z. Modelování dvoufázového prostředí: vliv tvaru a velikosti částic. In Modelování v mechanice 2003. Ostrava, Česká Republika: 2003. p. 112-117.
    Detail

  • 2002

    NÁHLÍK, L. Kritéria stability trhliny s vrcholem na bi- materiálovém rozhraní. In Problémy lomové mechaniky II. Brno: FAST VUT v Brně, 2002. p. 54-75. ISBN: 80-214-2129- 0.
    Detail

    KNÉSL, Z.; NÁHLÍK, L.; KERŠNER, Z. PROBLEMATIKA TRHLIN S VRCHOLEM NA ROZHRANÍ DVOU MATERIÁLŮ. In Únava a lomová mechanika. Žinkovy: 2002. p. 1-13.
    Detail

    KERŠNER, Z.; NÁHLÍK, L.; KNÉSL, Z. LOMOVÁ PROCESNÍ ZÓNA BETONU: INTERAKCE TRHLINA, KAMENIVO. In Inženýrská mechanika 2002. Svratka, Česká Republika: 2002. p. 1 ( p.)
    Detail

    KERŠNER, Z., NÁHLÍK, L., KNÉSL, Z. Analýza interakce kamenivo- trhlina z hlediska lomových charakteristik betonu. Beton TKS, 2002, no. 5, p. 40 ( p.)ISSN: 1213- 3116.
    Detail

  • 2001

    NÁHLÍK, L., KNÉSL, Z., VRBKA, J. Propagation of the fatigue crack through a protective layer. In Surface Treatment V. Computer Methods and Experimental Measurements. Southampton, Boston: WITPRESS, 2001. p. 181-190. ISBN: 1-85312-872- 4.
    Detail

    NÁHLÍK, L., KNÉSL, Z., VRBKA, J. Propagation of a fatigue crack through a protektive layer. In Surface Treatment V. Computer methods and experimental measurements. Great Britain, Southampton, Boston: Edited by C.A. Brebia, WIT Press 2001, Southampton, Boston, 2001. p. 181 ( p.)ISBN: 1-85312-872- 4.
    Detail

    KNÉSL, Z., NÁHLÍK, L., KERŠNER, Z. Calculation of the critical stress in two- phase materials. In Structural Engineering, Mechanics and Computation. Amsterdam: ELSEVIER SCIENCE Ltd., 2001. p. 737 ( p.)ISBN: 0-08-043948- 9.
    Detail

*) Publications are generated once a 24 hours.