Publication detail

Influencing the Indentation Curves by the Tilt of the Berkovich Indenter at FEM Modelling of the Steel Nanoindentation

KOVÁŘ, J. FUIS, V. ČTVRTLÍK, R. TOMÁŠTÍK, J.

Original Title

Influencing the Indentation Curves by the Tilt of the Berkovich Indenter at FEM Modelling of the Steel Nanoindentation

Type

journal article in Scopus

Language

English

Original Abstract

The influence of the Berkovich indenter tilt on the results of the FEM modelling of steel nanoindentation is evaluated in this paper. The shape deviations of the indenter have a great impact on the results of the nanoindentation. The main deviations are the indenter bluntness and indenter tilt. The indenter tilt has an impact on the shape of the contact area and the shape of indentation curves. The X5CrNiCuNb 16-4 steel nanoindentation with Berkovich indenter was modelled and the indentation curves were obtained. The Berkovich indenter was blunted and the tilt of the indenter was changed to determine the influence of the indentation curves by the indenter tilt. The plasticity of the steel was modelled with the multilinear model of material, which was fitted to the data from tensile test. The results showed that growing tilt shifts the indentation curves to higher values of indentation forces and makes unloading curves slightly steeper which is in the agreement with larger contact area. The calculated indentation curves were compared with the indentation curves obtained by experiment and the impact of the indenter tilt to the indentation curves was determined by the comparing of the maximal forces and the shapes of the indentation curves.

Keywords

nanoindentation, indenter shape deviations, indenter tilt, indenter bluntness

Authors

KOVÁŘ, J.; FUIS, V.; ČTVRTLÍK, R.; TOMÁŠTÍK, J.

Released

13. 11. 2023

Publisher

Sciendo

Location

Košice

ISBN

1335-8987

Periodical

Powder Metallurgy Progress

Year of study

22

Number

1

State

Slovak Republic

Pages from

53

Pages to

61

Pages count

9

URL

https://sciendo.com/article/10.2478/pmp-2022-0007

Full text in the Digital Library

http://hdl.handle.net/11012/245119

BibTex

@article{BUT180346,
  author="Jaroslav {Kovář} and Vladimír {Fuis} and Radim {Čtvrtlík} and Jan {Tomáštík}",
  title="Influencing the Indentation Curves by the Tilt of the Berkovich Indenter at FEM Modelling of the Steel Nanoindentation",
  journal="Powder Metallurgy Progress",
  year="2023",
  volume="22",
  number="1",
  pages="53--61",
  doi="10.2478/pmp-2022-0007",
  issn="1335-8987",
  url="https://sciendo.com/article/10.2478/pmp-2022-0007"
}