Publication detail

Remelting of M-CrAlY Air Plasma Sprayed Coatings by Means of Aluminium Cold Rolling and Conventional Heat Treatment

ČELKO, L. ŘIČÁNKOVÁ, V. KLAKURKOVÁ, L. ZÁBRANSKÝ, K. ŠVEJCAR, J.

Original Title

Remelting of M-CrAlY Air Plasma Sprayed Coatings by Means of Aluminium Cold Rolling and Conventional Heat Treatment

Type

abstract

Language

English

Original Abstract

Air plasma spray technique was used to produce NiCrAlY and CoNiCrAlY coatings on the Inconel 713 LC substrate. A certain amount of imperfectly melted powder particles, voids and oxides was also present in plasma sprayed coating microstructure. The aluminium sheet of 99,999 purity was cladded by means of cold rolling onto the coating surface. After the cladding of aluminium was the samples annealed at the temperatures of 650, 660 and 700oC for different dwell time in argon atmosphere. It was found that the temperature significantly affects the aluminium, which enable to create the NiAl and NiAl phases within the original plasma sprayed coating region. Annealing time also affects remelting of the Inconel 713 LC substrate surface. The microstructure of coatings was recorded by scanning electron microscope. Coating thickness and amount of voids were measured by means of image analysis. The microstructure of coating was recored by scanning electron microscope. Coating thickness and amount of voids were measured by means of image analysis. The concentration of phases was estimated by energy dispersive microanalysis.

Keywords

plasma spray; NiCrAlY; CoNiCrAlY; diffusion; Inconel 713 LC

Authors

ČELKO, L.; ŘIČÁNKOVÁ, V.; KLAKURKOVÁ, L.; ZÁBRANSKÝ, K.; ŠVEJCAR, J.

Released

5. 9. 2011

Publisher

IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts

Location

Belgrade, Serbia

Pages from

103

Pages to

103

Pages count

1

BibTex

@misc{BUT89766,
  author="Ladislav {Čelko} and Veronika {Řičánková} and Lenka {Klakurková} and Karel {Zábranský} and Jiří {Švejcar}",
  title="Remelting of M-CrAlY Air Plasma Sprayed Coatings by Means of Aluminium Cold Rolling and Conventional Heat Treatment",
  booktitle="YUCOMAT 2011",
  year="2011",
  edition="13",
  pages="103--103",
  publisher="IInstitute of Technical Sciences of the Serbian Academy of Sciences and Arts",
  address="Belgrade, Serbia",
  note="abstract"
}