Detail publikace

Machining of B1914 nickel-based superalloy using wire electrical discharge machining

MOURALOVÁ, K. POLZER, A. BENEŠ, L. BEDNÁŘ, J. ZAHRADNÍČEK, R. PROKEŠ, T. FIALA, Z. FRIES, J.

Originální název

Machining of B1914 nickel-based superalloy using wire electrical discharge machining

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The unconventional technology of wire electrical discharge machining is a key engineering technology, designed primarily for machining of conventionally difficult machine materials. One of them is nickel alloys, which are majorly used in the aerospace and energy industries. The subject of research in this study was specifically the B1914 nickel-based superalloy, which was subjected to many analyses leading to an overall optimization of its machining using wire electrical discharge machining. In order to determine the effect of machine parameters setup (pulse off time, gap voltage, discharge current, pulse on time and wire feed) on cutting speed, topography, morphology, surface and subsurface layer quality, an extensive Box-Behnken design experiment consisting of 46 rounds was carried out. The analyses of the condition of the surface and subsurface layers were performed, including their chemical composition and changes caused by wire electrical discharge machining. It was found out that the factors like pulse off time, discharge current and pulse on time have the greatest effect on the cutting speed, although from the point of view of surface topography the parameter pulse off time is not significant. The remaining two parameters cause the cutting speed to act against the surface topography i.e. with the increasing cutting speed, the surface topography gets worse and vice versa.

Klíčová slova

Wire electrical discharge machining; nickel alloy; B1914; design of experiment; machining parameters

Autoři

MOURALOVÁ, K.; POLZER, A.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FIALA, Z.; FRIES, J.

Vydáno

24. 11. 2021

Nakladatel

SAGE PUBLICATIONS LTD

Místo

LONDON

ISSN

0954-4089

Periodikum

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING

Ročník

235

Číslo

6

Stát

Spojené království Velké Británie a Severního Irska

Strany od

2141

Strany do

2153

Strany počet

13

URL

https://journals.sagepub.com/doi/abs/10.1177/09544089211031746

BibTex

@article{BUT172663,
  author="Kateřina {Mouralová} and Aleš {Polzer} and Libor {Beneš} and Josef {Bednář} and Radim {Zahradníček} and Tomáš {Prokeš} and Zdeněk {Fiala} and Jiří {Fries}",
  title="Machining of B1914 nickel-based superalloy using wire electrical discharge machining",
  journal="PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING",
  year="2021",
  volume="235",
  number="6",
  pages="2141--2153",
  doi="10.1177/09544089211031746",
  issn="0954-4089",
  url="https://journals.sagepub.com/doi/abs/10.1177/09544089211031746"
}