Detail publikace

Reinforcing of Sand With 3D Printed Fibres – Review of Properties, Fabrication of Fibres and Initial Testing Programme

CHALMOVSKÝ, J. KOUDELA, P. MIČA, L.

Originální název

Reinforcing of Sand With 3D Printed Fibres – Review of Properties, Fabrication of Fibres and Initial Testing Programme

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

Fibre reinforcement is an effective method of soil improvement that presents an alternative solution to other more common methods of ground reinforcement such as mechanical stabilization by geosynthetics (geogrids, geotextiles, geocomposites, etc.). Research activities in this area are being carried out, but the main disadvantage of currently used fibres is their uniform cross-section and usually smooth surface given by available production methods. This study presents an alternative way of fabrication of synthetic fibres – utilization of fused deposition modelling (3D printing). With the rapid development in commercially available 3D printing techniques, it is now possible to refine the shape and dimensions of 3D printed objects to a tenth of a millimetre. The review of the basic index and mechanical properties of fibre-reinforced soils is presented in the first part of the paper. The second part is devoted to the description of the production process of fibres including the suitability analysis of materials used for 3D printing. Finally, the initial testing programme of fibre-reinforced non-cohesive soil is presented. The preformed laboratory test confirmed that the inclusion of 3D printed fibres led to a significant increase in shear strength. Examination of samples after tests did not reveal breakage of fibres, thus the fibres pull-out was the governing failure mode.

Klíčová slova

fibre, reinforcement, 3D printing, soil composite

Autoři

CHALMOVSKÝ, J.; KOUDELA, P.; MIČA, L.

Vydáno

9. 12. 2020

Nakladatel

IOP Publishing

Místo

Bristol

ISSN

1757-899X

Periodikum

IOP Conference Series: Materials Science and Engineering

Ročník

960

Číslo

3

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

10

Strany počet

10

URL

Plný text v Digitální knihovně

BibTex

@inproceedings{BUT166223,
  author="Juraj {Chalmovský} and Pavel {Koudela} and Lumír {Miča}",
  title="Reinforcing of Sand With 3D Printed Fibres – Review of Properties, Fabrication of Fibres and Initial Testing Programme",
  booktitle="5th World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium – WMCAUS 15-19 June 2020, Prague, Czech Republic",
  year="2020",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="960",
  number="3",
  pages="1--10",
  publisher="IOP Publishing",
  address="Bristol",
  doi="10.1088/1757-899X/960/3/032027",
  issn="1757-899X",
  url="https://iopscience.iop.org/article/10.1088/1757-899X/960/3/032027"
}