Detail publikace

Comparison of methods for determining the ferrite content in duplex cast steels

KAŇA, V. PERNICA, V. ZÁDĚRA, A. KRUTIŠ, V.

Originální název

Comparison of methods for determining the ferrite content in duplex cast steels

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The paper is concerned with comparing the methods for determining the ferrite content in castings from duplex stainless steels. It uses Schaeffler diagram, empirical formula based calculation, image analysis of metallographic sample, X-ray diffraction and measurement with a feritscope. The influence of wall thickness of the casting on the ferrite content was tested too. The results of the experiments show that the casting thickness of 25 or 60 mm does not have a significant effect on the measured amount of ferrite. The image analysis of metallographic sample and the measurement with the feritscope appear to be the most suitable methods. On the contrary, predictive methods, such as Schaeffler diagram or empirical formula based calculation are only indicative and cannot replace the real measurements. X-ray diffraction seems to be the least suitable measuring method. Values of ferrite content measured in such a way often deviated from the values measured by image analysis and with feritscope.

Klíčová slova

Non-destructive testing, Duplex cast steel, Metallographic evaluation, Feritscope, XRD

Autoři

KAŇA, V.; PERNICA, V.; ZÁDĚRA, A.; KRUTIŠ, V.

Vydáno

15. 5. 2019

Nakladatel

POLSKA AKAD NAUK, POLISH ACAD SCIENCES, PL DEFILAD 1, WARSZAWA, 00-901, POLAND

ISSN

1897-3310

Periodikum

Archives of foundry engineering

Ročník

19

Číslo

2

Stát

Polská republika

Strany od

85

Strany do

90

Strany počet

6

URL

http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-d1e89b84-120e-41a1-b94b-25bbf2a3a77e

BibTex

@article{BUT157348,
  author="Václav {Kaňa} and Vítězslav {Pernica} and Antonín {Záděra} and Vladimír {Krutiš}",
  title="Comparison of methods for determining the ferrite content in duplex cast steels",
  journal="Archives of foundry engineering",
  year="2019",
  volume="19",
  number="2",
  pages="85--90",
  doi="10.24425/afe.2019.127121",
  issn="1897-3310",
  url="http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-d1e89b84-120e-41a1-b94b-25bbf2a3a77e"
}