Detail publikace

Experimental Verification of Polymeric Distillation Unit

KROULÍKOVÁ, T. BROŽOVÁ, T. BARTULI, E. RAUDENSKÝ, M.

Originální název

Experimental Verification of Polymeric Distillation Unit

Anglický název

Experimental Verification of Polymeric Distillation Unit

Jazyk

en

Originální abstrakt

Desalination is common solution to a fresh water scarcity. The common desalination units are made of metal, which bring some disadvantage as corrosion or heavy weight. The presented paper discribe principle of polymeric distillation and present results of experimental verification of prototype of fully polymeric distillation. This prototype is based on air gap membrane distillation and combines two type of polymeric hollow fibers. Porous hollow fibers were used as membrane and the non-porous hollow fibers were used for the condenser. The prototype was operated in long-term continuous operation. Six experiments with different flow rate and temperature were done. During testing the temperature, humidity and amount of condensate was measured.

Anglický abstrakt

Desalination is common solution to a fresh water scarcity. The common desalination units are made of metal, which bring some disadvantage as corrosion or heavy weight. The presented paper discribe principle of polymeric distillation and present results of experimental verification of prototype of fully polymeric distillation. This prototype is based on air gap membrane distillation and combines two type of polymeric hollow fibers. Porous hollow fibers were used as membrane and the non-porous hollow fibers were used for the condenser. The prototype was operated in long-term continuous operation. Six experiments with different flow rate and temperature were done. During testing the temperature, humidity and amount of condensate was measured.

Dokumenty

BibTex 


@inproceedings{BUT157000,
  author="Tereza {Kroulíková} and Tereza {Kůdelová} and Erik {Bartuli} and Miroslav {Raudenský}",
  title="Experimental Verification of Polymeric Distillation Unit",
  annote="Desalination is common solution to a fresh water scarcity. The common desalination units are made of metal, which bring some disadvantage as corrosion or heavy weight. The presented paper discribe principle of polymeric distillation and present results of experimental verification of  prototype of fully polymeric distillation. This prototype is based on air gap membrane distillation and combines two type of polymeric hollow fibers. Porous hollow fibers were used as membrane and the non-porous hollow fibers were used for the condenser. The prototype was operated in long-term continuous operation. Six experiments with different flow rate and temperature were done. During testing the temperature, humidity and amount of condensate was measured.",
  address="Institute of Thermomechanics of the Czech Academy of Sciences",
  booktitle="Engineering Mechanics 2019 Book of Full Texts",
  chapter="157000",
  doi="10.21495/71-0-211",
  howpublished="print",
  institution="Institute of Thermomechanics of the Czech Academy of Sciences",
  year="2019",
  month="may",
  pages="211--214",
  publisher="Institute of Thermomechanics of the Czech Academy of Sciences",
  type="conference paper"
}