Detail publikace

The effect of curing temperature on the hydration of binary Portland cement

PALOU, M. KUZIELOVA, E. ŽEMLIČKA, M. BOHÁČ, M. NOVOTNÝ, R.

Originální název

The effect of curing temperature on the hydration of binary Portland cement

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

The effect of curing temperatures on the hydration of two binary systems comprising of Portland cement (PC) blended by metakaolin (MK) and blast-furnace slag (BFS) in two relative mass ratios (6/4, 5/5) was studied by means of isothermal calorimetry and combined TG/DSC technique in the temperature range of 30–60 °C. Higher curing temperatures accelerated the initial hydration reactions, especially in the case of more reactive MK-blended samples. However, except the lower replacement level of PC by BFS, all other samples displayed slowdown of hydration at later stages. The use of MK together with curing at 50 and 60 °C even resulted in the lower ultimate hydration degree after 48 h when compared with corresponding samples cured at 30 °C. Deceleration effect of higher curing temperatures was demonstrated mainly by decreasing amount of CSH phases. Pozzolanic activity of supplemental materials was affected by curing temperatures less than primary hydration reactions.

Klíčová slova

Blended cements, Metakaolin, Blast-furnace slag

Autoři

PALOU, M.; KUZIELOVA, E.; ŽEMLIČKA, M.; BOHÁČ, M.; NOVOTNÝ, R.

Vydáno

23. 3. 2016

Nakladatel

Springer Netherlands

Místo

Akadémiai Kiadó, Budapest, Hungary 2016

ISSN

1388-6150

Periodikum

Journal of Thermal Analysis and Calorimetry

Číslo

10973

Stát

Maďarsko

Strany od

1

Strany do

10

Strany počet

10

URL

http://link.springer.com/article/10.1007%2Fs10973-016-5395-9

BibTex

@article{BUT123577,
  author="Martin {Palou} and Eva {Kuzielova} and Matúš {Žemlička} and Martin {Boháč} and Radoslav {Novotný}",
  title="The effect of curing temperature on the hydration of binary Portland cement",
  journal="Journal of Thermal Analysis and Calorimetry",
  year="2016",
  number="10973",
  pages="1--10",
  doi="10.1007/s10973-016-5395-9",
  issn="1388-6150",
  url="http://link.springer.com/article/10.1007%2Fs10973-016-5395-9"
}