Detail publikace

Development of The Bulge Test Equipment For Measuring Mechanical Properties of Thin Films

HOLZER, J. et al.

Originální název

Development of The Bulge Test Equipment For Measuring Mechanical Properties of Thin Films

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The bulge test apparatus designed for the measurement of mechanical material properties of thin films was constructed and tested. The principle of the test is to apply pressure on a free-standing membrane, to measure the membrane shape and to analyse the results. Commercially available silicon nitride (Si3N4) thin films were used for the testing. It is shown that interferometric set-up designed and assembled for the apparatus enables precise determination of 3D shape of the whole membrane, which allows more precise determination of materials parameters compared to measurement of the height of the center of the membrane only. Fit of an analytical formula gives values of Young modulus and residual stress with very good agreement with the literature data. Moreover, FEM model of the bulged membrane was developed. The main aim of the effort is to enable measurement of plastic properties of a thin film of interest, that will be deposited on the Si3N4 membrane with known properties and bulge test will be performed on the bilayer specimen. Subsequently, the material properties of the thin film will be obtained using FEM analysis.

Klíčová slova

Equipment testing, Mechanical properties, Membranes, Metallurgy, Metals, Nitrogen compounds, Plastic deformation, Silicon nitride

Autoři

HOLZER, J.; et al.

Vydáno

19. 10. 2017

Nakladatel

TANGER Ltd.

Místo

Brno, Czech Republic

ISBN

9788087294796

Kniha

METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings

Edice

26

Číslo edice

1

Strany od

1053

Strany do

1058

Strany počet

6

URL

BibTex

@inproceedings{BUT165776,
  author="Jakub {Holzer} and Hector Andres {Tinoco Navarro} and Tomáš {Kruml} and Tomáš {Pikálek} and Zdeněk {Buchta} and Josef {Lazar}",
  title="Development of The Bulge Test Equipment For Measuring Mechanical Properties of Thin Films",
  booktitle="METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings",
  year="2017",
  series="26",
  number="1",
  pages="1053--1058",
  publisher="TANGER Ltd.",
  address="Brno, Czech Republic",
  isbn="9788087294796",
  url="https://www.researchgate.net/publication/317166528_Development_of_the_bulge_test_equipment_for_measuring_mechanical_properties_of_thin_films"
}