Detail publikace

Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites

BULEJKO, P. BÍLEK, V.

Originální název

Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites

Typ

abstrakt

Jazyk

angličtina

Originální abstrakt

The main aim of the presented work is to investigate the effect of the addition of air entraining (AEA) and shrinkage reducing agents (SRA) on mechanical properties and carbonation resistance of alkali activated slag (AAS). Materials for the sample preparation were blast furnace slag activated using sodium silicate and AEA or SRA varying in content. Curing of samples was carried out in various conditions (air curing at laboratory conditions and water curing at the same temperature) and influence of these was studied too. The prepared samples (specimens with dimensions of 100 mm × 20 mm × 20 mm) where tested on compressive and bending strengths. The experimental results have shown that the addition of AEA had not significant influence on the mechanical properties while the addition of SRA had negative effect. However, the carbonation resistance markedly decreases with increasing amount of both agents. The same stands for the air curing as mechanical strengths are lower compared to those cured in water and the ratio of strength of the air cured composite and that of water cured one decreases with increasing content of SRA.

Klíčová slova

Alkali-activated slag, carbonation resistance, chemical additives, mechanical properties

Autoři

BULEJKO, P.; BÍLEK, V.

Vydáno

28. 9. 2015

Nakladatel

Inštitut za kovinske materiale in tehnologije

Místo

Ljubljana, Lepi pot 11, Ljubljana, Slovenija

ISBN

978-961-92518-8-1

Kniha

23rd INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY PROGRAM AND BOOK OF ABSTRACTS

Strany od

66

Strany do

66

Strany počet

1

BibTex

@misc{BUT117979,
  author="Pavel {Bulejko} and Vlastimil {Bílek}",
  title="Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites",
  booktitle="23rd INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY PROGRAM AND BOOK OF ABSTRACTS",
  year="2015",
  pages="66--66",
  publisher="Inštitut za kovinske materiale in tehnologije",
  address="Ljubljana, Lepi pot 11, Ljubljana, Slovenija",
  isbn="978-961-92518-8-1",
  note="abstract"
}