Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
doc. Ing.
Ph.D.
hajek@fme.vutbr.cz
Odeslat VUT zprávu
2019
HÁJEK, J.; VONDÁL, J.; JUŘENA, T.; SLÁMA, J. What the Combustion Engineer Gains from CFD Modeling: Gas Furnace. CHEMICAL ENGINEERING & TECHNOLOGY, 2019, vol. 42, iss. 4, p. 835-842. ISSN: 1521-4125.
Článek WoS
JUŘENA, T.; HÁJEK, J.; VONDÁL, J. Fluid dynamics of stirred photobioreactor cuvette. Book of Abstracts of 12th European Congress of Chemical Engineering and 5th European Congress of Applied Biotechnology. Via Giuseppe Colombo 81A, 20133 Milano, Italy: AIDIC Servizi SRL, 2019. p. 1549.ISBN: 978-88-95608-75-4.
Abstrakt
2018
HÁJEK, J.; VONDÁL, J. Engineering combustion modelling of 300 kW furnace. In Proceedings of the 23rd International Congress of Chemical and Process Engineering (CHISA 2018) and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018). Prague, Czech Republic: Czech Society of Chemical Engineering, 2018. p. 1095.1 ISBN: 978-1-5108-8119-8.
Stať ve sborníku v databázi WoS či Scopus
2017
JUŘENA, T.; DOHNAL, M.; HÁJEK, J. Simulation of Multiphase Flow in Stirred Tank of Nonstandard Design. In Chemical Engineering Transactions. Chemical Engineering transactions. Milan, Italy: Aidic Servizi, S.r.l., 2017. iss. 61, p. 625-630. ISBN: 978-88-95608-51-8. ISSN: 2283-9216.
VONDÁL, J.; KOTEK, L.; HÁJEK, J. Dry ice blasting for cleaning - measurement of pellets velocity behind the blasting nozzle. In Proceedings of the 22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016. Praha: ČSCHI, 2017. p. 1287-1294. ISBN: 9781510859623.
VONDÁL, J.; DOHNAL, M.; JUŘENA, T.; ZEJDA, V.; HÁJEK, J. Velocity measurement downstream of axial guide vane swirl generator. In Proceedings of the 22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016. Praha: ČSCHI, 2017. p. 283.1-283.6. ISBN: 9781510859623.
HÁJEK, J.; JEGLA, Z. Standards for fired heater design: Analysis of two dominant heat flux variation factors. APPLIED THERMAL ENGINEERING, 2017, vol. 125, iss. 1, p. 702-713. ISSN: 1359-4311.
2016
HÁJEK, J.; JEGLA, Z. Sensitivity Analysis of Radiative Heat Loading to Tube Coil with Geometric Imperfections. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 751-756. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
DOHNAL, M.; HÁJEK, J. Computational Analysis of Swirling Pipe Flow. In CHEMICAL ENGINEERING TRANSACTIONS. Chemical Engineering transactions. Milano, Italy: Aidic Servizi, S.r.l., 2016. p. 757-762. ISBN: 978-88-95608-42-6. ISSN: 2283-9216.
HÁJEK, J.; JUŘENA, T. New Numerical Treatment of Source Term in Convective Transfer of Heat between Fluid and Porous Solid Matrix. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2016, vol. 26, iss. 2, p. 409-426. ISSN: 0961-5539.
JEGLA, Z.; HÁJEK, J. Tepelné zatížení v oblasti změny průměru trubkového hadu v radiační komoře ohřevné pece. CHEMagazín, 2016, roč. 26, č. 1, s. 30-33. ISSN: 1210-7409.
Článek recenzovaný mimo WoS a Scopus
2015
HÁJEK, J.; DOHNAL, M.; VONDÁL, J.; BROUKAL, J. Analysis of effervescent spray quality for oil-fired furnace application. Clean Technologies and Environmental Policy, 2015, vol. 17, iss. 5, p. 1195-1205. ISSN: 1618-954X.
VONDÁL, J.; HÁJEK, J.; DOHNAL, M. Numerical study of stirred tank with multiphase system. In Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). Chemical Engineering transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1051-1056. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
VONDÁL, J.; HÁJEK, J. Wall heat transfer in gas-fired furnaces: Effect of radiation modelling. Applied andComputational Mechanics, 2015, vol. 9, iss. 1, p. 67-78. ISSN: 1802-680X.
VONDÁL, J.; JEGLA, Z.; HÁJEK, J. Fired heaters: validation of design parameters based on numerical modelling. In 10th European Conference on Industrial Furnaces and Boilers. Rio Tinto, Portugal: CENERTEC, 2015. p. 1-12. ISBN: 978-972-99309-7-3.
HÁJEK, J.; JUŘENA, T.; BAIER, B.; BAGHERZADEH, A.; SCHNICK, T.; SMEJKAL, Q. CFD Process Modeling of Industrial Calcination of Diatomite. Chemieingenieurtechnik, 2015, vol. 87, iss. 7, p. 991-997. ISSN: 0009-286X.
MIČIETA, J.; HÁJEK, J.; JANDAČKA, J. Simplified Model of Combustion Process in Fuel Bed. In TRANSCOM PROCEEDINGS 2015. Transcom proceedings. Žilina: University of Ţilina, 2015. p. 166-172. ISBN: 978-80-554-1048-7. ISSN: 1339-9829.
DOHNAL, M.; HÁJEK, J.; VONDÁL, J. Unsteadiness and Spatio-Temporal Statistics in Intermediate Effervescent Spray Region. In CHEMICAL ENGINEERING TRANSACTIONS - VOL.45. Chemical Engineering transactions. Milano, Italy: Aidic Servizi Srl, 2015. p. 1027-1032. ISBN: 978-88-95608-36-5. ISSN: 2283-9216.
JEGLA, Z.; VONDÁL, J.; HÁJEK, J. Standards for fired heater design: An assessment based on computational modelling. APPLIED THERMAL ENGINEERING, 2015, vol. 89, iss. 1, p. 1068-1078. ISSN: 1359-4311.
2014
VONDÁL, J.; HÁJEK, J. Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering transactions. Milan, Italy: AIDIC Servizi S.r.l., 2014. p. 907-912. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
HÁJEK, J.; JEGLA, Z.; VONDÁL, J. CFD analysis of tube circumference heat flux variation in radiant section of fired heater. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. iss. 6, p. 237-240. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
JUŘENA, T.; HÁJEK, J. Effects of convergence criteria on mass and energy balance of packed-bed combustion model. In Third International Conference on Computational Methods for Thermal Problems. ThermaComp proceedings. Napoli, Italy: Giannini Editore, 2014. iss. 6, p. 245-248. ISBN: 978-88-7431-727-1. ISSN: 2305-5995.
HÁJEK, J.; JEGLA, Z.; VONDÁL, J. Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance. In 24th European Symposium on Computer Aided Process Engineering (ESCAPE). Computer Aided Chemical Engineering. Netherlands: Elsevier, 2014. iss. 6, p. 331-336. ISBN: 978-963-9970-48-9. ISSN: 1570-7946.
BROUKAL, J.; HÁJEK, J.; VONDÁL, J. An experimental study of effervescent sprays: axial evolution of mean drop diameter. In 26th European Conference on Liquid Atomization & Spray Systems. Bremen, Germany: 2014. p. 1-6. ISBN: 978-3-88722-744-9.
VONDÁL, J.; HÁJEK, J.; JEGLA, Z. Počítačové modelování tepelných toků v pecích procesního průmyslu. In Sborník ANSYS 2014 Setkání uživatelů a konference. 1. Dolní Morava, ČR: 2014. s. 1-17. ISBN: 978-80-905040-9-7.
JEGLA, Z.; HÁJEK, J.; VONDÁL, J. Numerical Analysis of Heat Transfer in Radiant Section of Fired Heater with Realistic Imperfect Geometry of Tube Coil. In Proceedings of the 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2014. Chemical Engineering transactions. Milan, Italy: Aidic Servizi S.r.l., 2014. p. 889-894. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
BROUKAL, J.; HÁJEK, J. Experimental analysis of spatial evolution of mean droplet diameters in effervescent sprays. In 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction. Chemical Engineering transactions. Milano: AIDIC Servizi S.r.l., 2014. p. 780-786. ISBN: 978-88-95608-30-3. ISSN: 2283-9216.
2013
BROUKAL, J.; HÁJEK, J.; SOJKA, P.; JUŘENA, T. Drop Size Distribution in Effervescent Sprays: An Experimental study Using PDA Technique. In Abstract Book, 6th European Combustion Meeting, Lund, Sweden, June 25-28, 2013. Lund, Sweden: Congrex Sweden AB/Informationsbolaget Nyberg & Co., 2013. p. 1-6. ISBN: 978-91-637-2150-2.
BROUKAL, J.; HÁJEK, J.; SOJKA, P. Experimental Investigations of Effervescent Atomization Using Non-intrusive Techniques. Chemical Engineering Transactions, 2013, vol. 35, iss. 1, p. 1135-1140. ISSN: 1974-9791.
JUŘENA, T.; HÁJEK, J. GRATECAL – Computational Tool for Numerical Simulation of Biomass Grate Combustion. Proceedings of 9th European Congress of Chemical Engineers. The Hague, Netherlands: 2013. 1 p.
VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, vol. 35, iss. 1, p. 1153-1158. ISSN: 1974-9791.
JUŘENA, T.; HÁJEK, J. Mathematical Modelling of Grate Combustion: Bed and Freeboard Coupling Issues. Chemical Engineering Transactions, 2013, vol. 35, iss. 1, p. 985-990. ISSN: 1974-9791.
2012
BROUKAL, J.; VONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of wall heat fluxes in a gas fired furnace: practicable models for swirling non-premixed combustion. Chemical Engineering Transactions, 2012, vol. 29, iss. 2, p. 1399-1404. ISSN: 1974-9791.
HÁJEK, J.; JUŘENA, T. Modelling of 1MW Solid Biomass Combustor: Simplified Balance-Based Bed Model Coupled with Freeboard CFD Simulation. Chemical Engineering Transactions, 2012, vol. 29, iss. 1, p. 745-750. ISSN: 1974-9791.
VONDÁL, J.; HÁJEK, J. Swirling flow prediction in model combustor with axial guide vane swirler. Chemical Engineering Transactions, 2012, vol. 29, iss. 2, p. 1069-1074. ISSN: 1974-9791.
2011
JUŘENA, T.; HÁJEK, J. Note on convergence criteria for energy and mass in CFD model of fixed-bed combustion. MCS-7 Seventh Mediterranean Combustion Symposium - Proceedings. Napoli, Italy: Associazione Sezione Italiana del Combustion Institute, 2011. 1 p. ISBN: 978-88-88104-12-6.
BROUKAL, J.; HÁJEK, J. Effervescent Spray Modelling: Investigation of Drop Momentum Models and Validation by Measured Data. Chemical Engineering Transactions, 2011, vol. 25, iss. 1, p. 797-802. ISSN: 1974-9791.
JUŘENA, T.; HÁJEK, J.; KROPÁČ, J. Physical and chemical properties of biomass for CFD modelling of grate combustion. In Sborník CHISA 2011. Praha: Česká společnost chemického inženýrství, 2011. p. 1-12. ISBN: 978-80-905035-0-2.
JUŘENA, T.; HÁJEK, J. Energy Considerations in CFD Modelling of Biomass Combustion in an Experimental Fixed-bed Reactor. Chemical Engineering Transactions, 2011, vol. 25, iss. 2, p. 803-808. ISSN: 1974-9791.
VONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of swirling non-premixed gas flames in industrial-scale furnace. In Proceedings of the 9th european Conference on Industrial Furnaces and Boilers. Estoril, Portugal (PT): 2011. p. 1-9. ISBN: 978-972-99309-6-6.
VONDÁL, J.; HÁJEK, J. Prediction of flow through swirl generator and validation by measured data. In 13th European Turbulence Conference 2011 (ETC13). Journal of Physics: Conference Series. Varšava, Polsko: IOPscience, 2011. iss. 2, p. 1-6. ISBN: 9781622765430. ISSN: 1742-6588.
TUREK, V.; HÁJEK, J.; JEGLA, Z.; STEHLÍK, P. Optimum design of fluid distribution systems in heat exchangers. Asia-Pacific Journal of Chemical Engineering, 2011, vol. 6, iss. 5, p. 750-759. ISSN: 1932-2143.
BROUKAL, J.; HÁJEK, J. Validation of an effervescent spray model with secondary atomization and its application to modelling of a large-scale furnace. APPLIED THERMAL ENGINEERING, 2011, vol. 31, iss. 13, p. 2153-2164. ISSN: 1359-4311.
2010
JUŘENA, T.; HÁJEK, J. Mathematical modelling of biomass combustion: packing conditions issues. Chemical Engineering Transactions, 2010, vol. 21, iss. 2, p. 1105-1110. ISSN: 1974-9791.
TUREK, V.; KOHOUTEK, J.; HÁJEK, J.; JEGLA, Z. Optimum Design of Distributor and Collector in a Specific U-Tube Heat Exchanger. In Proceedings of the 19th International Congress of Chemical and Process Engineering CHISA 2010. Praha: Process Engineering Publisher, Ing. Jan Novosad, 2010. p. 1193-1206. ISBN: 978-80-02-02248-0.
BROUKAL, J.; HÁJEK, J. Wall heat fluxes in swirling combustion of extra-light fuel-oil in large-scale test combustor: experiment and modeling using eddy dissipation model. Chemical Engineering Transactions, 2010, vol. 21, iss. 2, p. 1111-1116. ISSN: 1974-9791.
VONDÁL, J.; HÁJEK, J.; KERMES, V. Local wall heat fluxes in swirling non-premixed natural gas flames in large-scale combustor: Data for validation of combustion codes. Chemical Engineering Transactions, 2010, vol. 21, iss. 2, p. 1123-1128. ISSN: 1974-9791.
2009
VONDÁL, J.; HÁJEK, J. Experimental and numerical analysis of wall heat transfer in non-premixed gas combustor. Chemical Engineering Transactions, 2009, vol. 18, iss. 1, p. 587-592. ISSN: 1974-9791.
JUŘENA, T.; HÁJEK, J. Computational system for CFD simulation of drying and devolatilization of biomass in 1D experimental fixed bed reactor. In 56. konference chemického a procesního inženýrství CHISA 2009 (sborník příspěvků). 1. Praha: Česká společnost chemického inženýrství, 2009. p. A4.8 (A4.8 p.)ISBN: 978-80-86059-51-8.
RECMAN, M.; HÁJEK, J. Experimental reactor for analysing biomass combustion properties. Chemical Engineering Transactions, 2009, vol. 18, iss. 1, p. 977-982. ISSN: 1974-9791.
JUŘENA, T.; RECMAN, M.; HÁJEK, J. Simulation of biomass drying in fixed bed of experimental grate combustion reactor. Chemical Engineering Transactions, 2009, vol. 18, iss. 1, p. 599-604. ISSN: 1974-9791.
2008
HÁJEK, J. Computational fluid dynamic simulations in thermal waste treatment technology - Design, optimisation and troubleshooting. Energy, 2008, vol. 33, iss. 6, p. 930-941. ISSN: 0360-5442.
2007
PETR, P.; STEHLÍK, P.; HÁJEK, J. CFD simulace prototypu jednotky pro energetické využití různých druhů biomasy a fytomasy. In CHISA 2007 - SBORNÍK 1. 2007. Praha: Česká společnost chemického inženýrství, 2007. s. 198 ISBN: 80-86059-47-2.
ŠARLEJ, M.; PETR, P.; HÁJEK, J.; STEHLÍK, P. Computational support in experimental burner design optimisation. APPLIED THERMAL ENGINEERING, 2007, vol. 27, iss. 16, p. 2727-2732. ISSN: 1359-4311.
ŠARLEJ, M.; HÁJEK, J.; STEHLÍK, P. Simulace spalování a extrakce tepla ve spalovací komoře. In CHISA 2007 - Sborník 1. 2007. s. x (x s.)ISBN: 80-86059-47-2.
PISKOVSKÝ, M.; HÁJEK, J.; KILKOVSKÝ, B.; ELSAESSER, T.; STEHLÍK, P. ANALYSIS OF HELICAL HEAT EXCHANGER WATER - SLUDGE BY CFD. In Proceedings of Heat-SET 2007. Volume 1. Chambery, FR: 2007. p. 471-482.
PETR, P.; BÉBAR, L.; HÁJEK, J.; ŠARLEJ, M.; STEHLÍK, P. Optimising design of secondary combustion chambers using CFD. In 17TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING. Radarweg 29, PO Box 211, 1000 AE Amsterdam, The Netherlands: Elsevier, 2007. p. 1-6. ISBN: 978-0-444-53158-2.
MÁŠA, V.; PAVLAS, M.; HÁJEK, J.; SKOUPÝ, A. Effective and environmental friendly energy utilization of forest biomass. In IUFRO - All Division 5 Conference - Forest Products and Environment: a Productive Symbiosis. Taipei, Taiwan: 2007. p. 160
2006
PISKOVSKÝ, M., HÁJEK, J., STEHLÍK, P. Computational fluid dynamics simulation of venturi wet scrubber. In CHISA 2006 Summaries 3 - Hydrodynamic Processes. Praha: Process Engineering Publisher, 2006. p. 1-8. ISBN: 80-86059-45-6.
HÁJEK, J. CFD simulation in thermal waste treatment technology design, optimization and troubleshooting. In CHISA2006-System Engineering - Summaries 4. Praha: 2006. p. 1456 ISBN: 80-86059-45-6.
PETR, P.; HÁJEK, J.; ŠARLEJ, M.; PISKOVSKÝ, M.; PAŘÍZEK, T.; BÉBAR, L.; STEHLÍK, P. Computational analysis of secondary combustion chamber in hazardous waste incinerator. In CHISA 2006 - Summaries 4 - System Engineering. Praha: Process Enginnering Publisher, 2006. p. 1373 ISBN: 80-86059-45-6.
ŠARLEJ, M.; PETR, P.; HÁJEK, J.; STEHLÍK, P. Computational support in experimental burner design optimisation. In CHISA2006-System Engineering - Summaries 4. Praha: 2006. p. 867-871. ISBN: 80-86059-45-6.
2005
HÁJEK, J.; KERMES, V.; ŽITNÝ, R.; STEHLÍK, P.; BÉBAR, L.; ORAL, J. Pokroky ve vývoji alternativního semi-empirického NOx post-procesoru pro CFD simulace hořáků. In 52. konference chemického a procesního inženýrství CHISA 2005. Srní, Šumava: 2005. s. 57 ISBN: 80-86059-42-1.
HÁJEK, J.; PETR, P.; ŠARLEJ, M.; KERMES, V.; DVOŘÁK, R.; STEHLÍK, P.; ORAL, J.; ŠIKULA, J. COMPUTATIONAL SUPPORT IN EMISSIONS ABATEMENT. In Proceedings of the First International Conference on Thermal Treatment and Resource Utilization of Wastes. Beijing, China: 2005. p. 213-123.
PISKOVSKÝ, M.; HÁJEK, J.; BÉBAR, L.; STEHLÍK, P.; ORAL, J. Assessment of Venturi nozzle for filter bag cleaning in fabric filters using CFD modelling. In FILTECH 2005 II. Wiesbaden: 2005. p. 139-146.
PETR, P.; ŠARLEJ, M.; HÁJEK, J.; PISKOVSKÝ, M.; BÉBAR, L.; STEHLÍK, P. CFD analýza dohořívací komory jednotek pro termické zpracování nebezpečných odpadů. In 52. konference chemického a procesního inženýrství CHISA 2005. Srní, Šumava: 2005. s. 219 ISBN: 80-86059-42-1.
HÁJEK, J.; KERMES, V.; ŠIKULA, J.; STEHLÍK, P. Utilising CFD as efficient tool for improved equipment design. In Proceedings of the 6th Conference on Process Integration, Modelling and Optimisation of Energy Saving and Pollution Reduction. Hamilton, Ontario, Canada: 2005. p. 1-9.
ORAL, J.; STEHLÍK, P.; BÉBAR, L.; HÁJEK, J.; VÁVRA, Z.; MAŘÍK, P. Aplikace dioxinového filtru ve spalovně komunálního odpadu. 2005, roč. 37, č. 3, s. 12-15.
HÁJEK, J.; KERMES, V.; ŠIKULA, J.; STEHLÍK, P. Utilizing CFD as Efficient Tool for Improved Equipment Design. HEAT TRANSFER ENGINEERING, 2005, vol. 26, iss. 5, p. 1-10. ISSN: 0145-7632.
DVOŘÁK, R., STEHLÍK, P., BÉBAR, L., HÁJEK, J., ORAL, J. Nové zařízení pro katalytické zneškodňování VOC, HOC a oxidu uhelnatého jako výsledek kombinace teoretického a experimentálního přístupu. In CHISA 2005 Plné texty přednášek na CD-ROM. Praha: ČSCHI, 2005. s. 1-10. ISBN: 80-86059-42-1.
KERMES, V.; HÁJEK, J.; STEHLÍK, P.; BÉBAR, L.; ORAL, J. Progress in development of a novel semi-empirical NOx modelling approach. In Chemical Engineering Transactions, Volume 7. Giardini di Naxos: 2005. p. 369-374. ISBN: 88-900775-8-1.
PISKOVSKÝ, M., HÁJEK, J., BÉBAR, L., STEHLÍK, P., ORAL, J. Optimální návrh filtru na bázi simulačních výpočtů s využitím CFD. In CHISA 2005. Praha: Ing. Jan Novosad, Procesní inženýrství, 2005. s. 1-8. ISBN: 80-86059-42-1.
DVOŘÁK, R., STEHLÍK, P., BÉBAR, L., HÁJEK, J., ORAL, J. New and original equipment for environmental protection as a result of convenient combination of experimental and computational approach. In Computational Methods and Experimental Measurements XII. Malta: WIT PRESS, 2005. p. 1-10. ISBN: 1-84564-020-9.
2004
HÁJEK, J.; KERMES, V.; BROŽ, F.; ORAL, J. Modelling as a Supporting Tool for Research and Development of Low NOx Gas Burners. In CHT-04: Advanced in Computaional Heat Transfer III. New York: Begell House Inc., 2004. p. P198 (P215 p.)ISBN: 1-5670-174-2.
KERMES, V., HÁJEK, J., NEKVASIL, R., BÉBAR, L., ORAL, J. Evaluation of different approaches for prediction of NOx emissions concentration from gas flames. In 16th International Congress of Chemical and Process Engineering CHISA 2004, 7th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2004. Czech Republic: ČSCHI, 2004. p. 1-20. ISBN: 80-86059-40-5.
2003
HÁJEK, J.; KERMES, V.; BROŽ, F.; STEHLÍK, P.; ČANĚK, J.; ORAL, J. Utilising CFD software for low NOx Burner design. In Proceedings of 4th European Congress in Chemical Engineering. Granada, Spain: 2003. p. 1-3.
HÁJEK, J.; KERMES, V.; ŠIKULA, J.; STEHLÍK, P. Application of CFD in heat recovery system of incinerator for thermal treatment of sludge. In Proceedings of theTwenty-second Annual International Conference on Incineration and Thermal Treatment Technologies. Orlando, Florida, USA: University of Maryland, 2003. p. 1-11.
HÁJEK, J.; KERMES, V.; BÉBAR, L.; STEHLÍK, P.; ORAL, J. Application of CFD for solution of heat transfer and fluid flow for troubleshooting in industry. In HEFAT 2003 - Heat Transfer, Fluid Mechanics and Thermodynamics. JAR: 2003. p. 1-6. ISBN: 0-620-30503-7.
KERMES, V., HÁJEK, J., ORAL, J., BÉBAR, L., ŠŤASTA, P. Substituing Fuel by Mining Gas in Unit for Thermal Treatment of Sludge. In Proceedings of theTwenty-second Annual International Conference on Incineration and Thermal Treatment Technologies. Orlando, Florida, USA: University of Maryland, 2003. p. 1-11.
HÁJEK, J.; STEHLÍK, P.; BROŽ, F.; ORAL, J. Aplikace CFD v oblasti termického zpracování odpadů. In Sborník Jubilejní 50. konference chemického a procesního inženýrství CHISA 2003. 2003. s. 1-14. ISBN: 80-86059-36-7.
BÉBAR, L.; FILIP, M.; BUCHTA, J.; STEHLÍK, P.; HÁJEK, J.; DVOŘÁK, R. Nové zařízení pro čištění spalin. In Sborník Jubilejní 50. konference chemického a procesního inženýrství CHISA 2003. 2003. s. 1-13. ISBN: 80-86059-36-7.
2002
KERMES, V., HÁJEK, J., BÉBAR, L., ČANĚK, J., ORAL, J., STEHLÍK, P. Emission Reduction through Effective Burner Design. In 29th International Conference of the Slovak Society of Chemical Engineering. Tatranské Matliare, Slovak Republic: 2002. p. 1-13. ISBN: 80-227-1690-1.
KERMES, V.; HÁJEK, J.; BÉBAR, L.; ČANĚK, J.; ORAL, J.; STEHLÍK, P. Emission Reduction through Effective Burner Design. In 15th International Congress of Chemical and Process Engineering CHISA 2002, 5th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2002. Prague, Czech Republic: 2002. p. 25-43. ISBN: 80-86059-33-2.
BÉBAR, L.; MARTINÁK, P.; HÁJEK, J.; STEHLÍK, P.; HAJNÝ, Z.; ORAL, J. Waste to Energy in the Field of Thermal Processing of Waste. APPLIED THERMAL ENGINEERING, 2002, vol. 22, iss. 15, p. 1-10. ISSN: 1359-4311.
FABIKOVIČ, V.; ŠTULÍŘ, R.; HÁJEK, J.; ORAL, J.; STEHLÍK, P. Simulation and Measurement of Device for Thermal Treatment of Organic Pollutants. In 29th International Conference of the Slovak Society of Chemical Engineering. Tatranské Matliare, Slovak Republic: 2002. p. 1-8. ISBN: 80-227-1690-1.
HÁJEK, J.; KERMES, V.; BÉBAR, L.; STEHLÍK, P. CFD Modelling and Design Optimisation of an Exhaust Duct. In 15th International Congress of Chemical and Process Engineering CHISA 2002, 5th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2002. Prague, Czech Republic: 2002. p. 1-13. ISBN: 80-86059-33-2.
KERMES, V., HÁJEK, J., BÉBAR, L., ČANĚK, J., ORAL, J., STEHLÍK, P. Burners with Reduced Emission Production as Important Contribution in Industrial application. In Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems. Dubrovnik, Croatia: 2002. p. 1-10. ISBN: 953-6759-16-0.
2001
FABIKOVIČ, V.; HÁJEK, J.; ŠTULÍŘ, R.; ORAL, J. Modeling of Unit for Thermal Processing of Wastes Based on CFD. In 4th Conference on Process Integration, Modeling and Optimization for Energy saving and Pollution Reduction. Florence, Italy: 2001. p. 1-6.
MARTINÁK, P.; STEHLÍK, P.; ŠÁLEK, J.; HÁJEK, J. Selection of Utilities From Various Points of View. In 4th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction. Florence, Italy: AIDIC - the Italian Association of Chemical Engineering, 2001. p. 1-6.
MARTINÁK, P., HÁJEK, J. Selection of Utilities from Various Points of View. In Process Integration, Modelling and Optimization. AIDIC Conference Series, Volume 5,2002. Milano, Italy: Editoriale Elsevier SpA, 2001. 6 p. ISBN: 0390-2358.
Kapitola, resp. kapitoly v odborné knize
*) Citace se generují jednou za 24 hodin.