Ing.

Jiří Ctibor

FEKT, UVEE – vědecký pracovník

+420 54114 6745
xctibo01@vut.cz

Odeslat VUT zprávu

Ing. Jiří Ctibor

Publikace

  • 2023

    FOLPRECHT, M.; ČERVINKA, D.; CTIBOR, J.; VOREL, P.; HEMZAL, M.; NOVOTNÁ, V. Experimental High–voltage AC Generators for Cardiological Purposes. In 2023 International Conference on Electrical Drives and Power Electronics (EDPE). 2023 International Conference on Electrical Drives and Power Electronics (EDPE). Nový Smokovec, Slovakia: Technical University of Košice, Letná 9, 042 00 Košice, 2023. s. 1-7. ISBN: 979-8-3503-2275-0. ISSN: 2770-7652.
    Detail | WWW

  • 2021

    CTIBOR, J. CONSTRUCTION OF THE ACTIVE MAGNETIC BEARING CONTROL SYSTEM. In Proceedings II of the 27th Conference STUDENT EEICT 2021 selected papers. 1. Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2021. s. 240-244. ISBN: 978-80-214-5943-4.
    Detail | WWW

  • 2019

    KNOBLOCH, J.; CTIBOR, J.; VOREL, P. Hardware Concept of a New BLDC Motor Controller Based on BCD Technology. In 2019 International Conference on Electrical Drives & Power Electronics (EDPE) 9 th Joint Slovakian-Croatian Conference CONFERENCE PROCEEDINGS. Nový Smokovec, Slovakia: Technical University of Košice, Letná 9, 042 00 Košice, 2019. s. 217-220. ISBN: 978-1-7281-0388-4.
    Detail | WWW

    CTIBOR, J.; PAZDERA, I. ST MICROELECTRONICS BLDC DRIVE DEMONSTRATOR SOFTWARE PRE-DEVELOPMENT. In Proceedings of the 25th Conference STUDENT EEICT 2019. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních, 2019. s. 674-678. ISBN: 978-80-214-5735-5.
    Detail | WWW

    CTIBOR, J.; PAZDERA, I.; KNOBLOCH, J. Model aktivních magnetických ložisek s uvažováním nelineárních feromagnetik. In XXXVI. Celostátní konference o elektrických pohonech. Plzeň: Česká elektrotechnická společnost, ÚOS Elektrické pohony, 2019. s. 1-6. ISBN: 978-80-02-02860-4.
    Detail

    CTIBOR, J.; PAZDERA, I.; KNOBLOCH, J.; VOREL, P. BLDC Motor Control with Cascade Structure Utilizing ARM MCU. In 2019 International Conference on Electrical Drives & Power Electronics (EDPE) 9 th Joint Slovakian-Croatian Conference CONFERENCE PROCEEDINGS. Nový Smokovec, Slovakia: Technical University of Košice, Letná 9, 042 00 Košice, 2019. s. 61-65. ISBN: 978-1-7281-0388-4.
    Detail | WWW

    FOLPRECHT, M.; ČERVINKA, D.; CTIBOR, J. Metody měření impedance při buněčné elektroporaci. In XXXVI. celostátní konference o elektrických pohonech, Sborník. Plzeň: Česká elektrotechnická společnost, ÚOS Elektrické pohony, 2019. s. 1-6. ISBN: 978-80-02-02860-4.
    Detail

  • 2018

    PAZDERA, I.; PROCHÁZKA, P.; HUTÁK, P.; CIPÍN, R.; CTIBOR, J.; PATOČKA, M. Induction Machine Models and Equivalent Circuits Based on Hybrid Parameters of Two–Port Network. In Mechatronics 2017. Advances in Intelligent Systems and Computing. Springer International Publishing AG 2018, 2018. s. 202-210. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
    Detail | WWW

    CTIBOR, J.; PAZDERA, I.; KNOBLOCH, J. One-axis Radial Active Magnetic Bearing Simulink Model with Respect of Nonlinear Ferromagnetics. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno, Czech Republic: IEEE, 2018. s. 66-71. ISBN: 978-80-214-5544-3.
    Detail | WWW

    CTIBOR, J.; PAZDERA, I. Comparison of the Common Control Techniques of Induction Machines: Comparison of the Dynamics Based on Matlab Simulink Simulations Considering Motor Parameters Deviations. In Conference Proceedings - 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe. Palermo, Italy: Institute of Electrical and Electronics Engineers Inc., 2018. s. 1-6. ISBN: 978-1-5386-5186-5.
    Detail | WWW

    PAZDERA, I.; PROCHÁZKA, P.; CIPÍN, R.; CTIBOR, J. Synchronous Machine Model and Equivalent Circuits Based on Hybrid Parameters of Two–Port Network. In Proceedings of the 2018 18th International Conference on Mechatronics – Mechatronika (ME). 1. Brno, Czech Republic: IEEE, 2018. s. 120-125. ISBN: 978-80-214-5544-3.
    Detail | WWW

  • 2017

    CTIBOR, J.; PAZDERA, I. The New Stepper Driver for Low-Cost Arduino Based 3D Printer with Dynamic Stepper Control. In Mechatronics 2017. Advances in Intelligent Systems and Computing. Cham: Springer International Publishing AG 2018, 2017. s. 458-466. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
    Detail | WWW

    CTIBOR, J. INNOVATION OF THE CONTROL SYSTEM OF FUSED DEPOSIT MODELING LOW- COST 3D PRINTER. In Proceedings of the 23nd Conference STUDENT EEICT 2017. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních, 2017. s. 596-587. ISBN: 978-80-214-5496- 5.
    Detail | WWW

*) Citace publikací se generují jednou za 24 hodin.