Přístupnostní navigace
E-application
Search Search Close
Branch Details
Original title in Czech: Pozemní stavbyFASTAbbreviation: PSTAcad. year: 2015/2016
Programme: Civil Engineering
Length of Study: 4 years
Accredited from: 25.7.2007Accredited until: 31.12.2020
Profile
Study branch Building Structures is due to its complex content divided into four topics: Building Structure, Architecture in Building Structure, Technology and building process control, Building Services. The study is focused on knowledge in building structures and on education to self-scientific work oriented to specific professional areas of particular topic. Deepening of knowledge and abilities in complex and theoretical approach to technical problem solving and justification will be supported during mathematics and physics lectures. Managing theoretical and scientific disciplines which are related to thesis is ensured by passing selected obligatory lectures. Student is solving under guidance of his supervisor given professional problem according to theoretical and experimental requirements and defends results in his thesis. A graduate of PhD program, branch Building Structures is prepared for expected fulfillment of research and development process in selected area of the industry. Due to acquired knowledge he is capable of self-assertion to solve challenging architectural and constructional problems, technology and management of building realization, building services. The continuous active scientific activity is the qualification for possible engagement of graduates as members of the academic staffs at universities.
Guarantor
doc. Ing. Milan Vlček, CSc.
Issued topics of Doctoral Study Program
The topic of the dissertation is a comprehensive analysis of the possibility of increasing the flat roofs retention capacity and drainage modification factors. The work will authenticate using full-scale experiments.
Tutor: Bečkovský David, Ing., Ph.D.
Wall papers and wooden facings were used in historical buildings and are also used in modern buildings. From material point of view leather, cloth, paper plastic and wooden finishings are known. Wooden finishing is completed in many ways from traditional wooden varnishing to artificial boards. Influence of the mentioned finishings on indoor climate comfort in positive and possible negative effects and thermal insulation of the building envelope are the main tasks for the disertation.
Tutor: Vlček Milan, doc. Ing., CSc.
Due to increasing energy consumption, the need for sustainable construction and directive of EU is necessary to design structures in passive houses, in order to reduce energy consumtion and improving the internal environment.
Tutor: Kalousek Miloš, doc. Ing., Ph.D.
The work will deal with analysis and subsequent design measures to avoid pollution of HVAC systems, their implementation and subsequent use. The work will multivariate analysis according to types of systems and psychrometric air adjustments. The analysis will also be monitoring the impact of pollution on the hydraulics system. Methods solutions are theoretical and experimental, the result will be clear methodological outputs for use in practice.
Tutor: Rubina Aleš, doc. Ing., Ph.D.
Timber hybrid structures have considerable potential for further development of wooden buildings and their wider application for buildings can be evaluated as a contribution to sustainable development.
Tutor: Lavický Miloš, doc. Ing., Ph.D.
Tutor: Pěnčík Jan, prof. Ing., Ph.D.
The dissertation is focused on the architectural conservation. The student specifies his/her project according to his/her preferred topic (typology of architectural heritage, conservation areas, social and legislative issues, artistic approach, technology) and method (microanalysis, comparative analysis, historiographical analysis).
Tutor: Horáček Martin, doc. PhDr., Ph.D.
Building services systems that create the quality of indoor environments in historical buildings, were linked with the optimal design of the building and use natural laws. The topic includes a research of systems of heating and ventilation systems in historic buildings, analysis, model creation, simulation of behavior, experimental measurements and determination of recommendations and guidelines for renovation and monument renewal.
Tutor: Hirš Jiří, prof. Ing., CSc.
The topic of the thesis will be a comprehensive analysis of the behavior of reinforced masonry and mixed structures from the point of view of structural design, thermal and fire assessment.
The topic of the dissertation is a comprehensive proposal for prefabricated wooden buildings. Part of the design of the structures in terms of static design, the thermal and fire resistance.
This work focuses on the design and optimization of prefabricated green facades. The work includes a comprehensive verification of the various parts of the green facade of a full-scale experiments.
With the possibility of the use of composites from recycled polymers, such as thermal insulation block, there is a need to modify and improve existing rheological models. The development of models is depending on the way stress. The pressure stress is for that group of materials specifically load. Development models will be made on the basis of experimental prototypes monitoring the test samples with subsequent verification of FEA mathematical modeling.
Energy assessment of of technological units (eg. wastewater treatment plants, spa technology, technology of winter stadiums). Analysis of the technological processes, the description of a theoretical model of operation, the analysis of boundary conditions, sensitivity analysis, the potential energy savings, benchmarking components of the system, the evaluation criteria and utilization of renewable energy.
Creating a systematic procedure for management strategy municipalities and cities for the performance of the SMART City in the energy sector. Object modeling of buildings in the region, cooperation with the Centre of Competence Smart Regions on FAST.
Current systems of wooden buildings in therms of accoustic are resolved satisfactory for perimeter structures. The aim is to analyze the acoustic properties of internal structures and make any adjustments of layers composition to achieve the best acoustic comfort in living spaces
Tutor: Kovářová Barbora, Ing., Ph.D.
PhD thesis focuses on the research use of land for energy for heating and cooling. The scope of work will be theoretical and experimental investigation of the thermal interaction between an building and ground and an optimal design of ground and foundation exchangers. The aim is to streamline obtaining geothermal energy of the elements of foundation structures and to develop a methodology for their design in the Czech Republic.
Tutor: Šikula Ondřej, prof. Ing., Ph.D.
The aim of this work is study the syndrome SBS (Sick Building Syndrome) study with new buildings, passive and low-energy houses.
PhD thesis focuses on the modeling and simulation of intelligent buildings and smart regions. Effective use and placement of elements of ventilation, heating and cooling in buildings and their optimal control system. Systems, equipment and strategies for energy storage.
Research focused on traditional urban patterns and their connection to actual needs of the 21st-century society, aimed to the professional description and explanation of tools for qualitative improvement of public spaces. The topic of dissertation is specified according to the student´s specialization (garden cities, City Beautiful, protected heritage areas, New Urbanism, technologies and measures for sustainable planning, community plannig, and peer-to-peer urbanism).
Tutor: Manychová Monika, doc. Ing., Ph.D.
Experimental Analysis and design of multi-layer ventilated facade systems. Monitoring the impact of ventilated air gaps on the inside of the building microclimate.
Tutor: Šuhajda Karel, doc. Ing., Ph.D.
Work will consider specific proposals of container wooden houses. It will be working both on the structure of the container, but also on the casing itself and bonding of the individual containers in a single unit. Will be constructed partial construction details.
Tutor: Novotný Miloslav, prof. Ing., CSc.
The aim of the work is the search for optimal way of modifying the original substrate for the new finishes , including thermal insulation composite system. The idea is to find a appropriate solutions and define the conditions under which it would not need to go through the laborious removal of the original plaster and replacing them with new ones. It will be dealt also with regard to the efficient use of financial cost and effort.
Tutor: Šlanhof Jiří, Mgr. Ing., Ph.D.
PhD thesis is focused on the optimization of Thermo Active Building Structures (TABS) used for heating and cooling buildings. Assumes the use of simulation methods, laboratory experiment and measurement INSITU. The aim is to provide recommendations for optimal design and control of TABS.
The dissertation is focused on ornament in architecture. Ornament will be discussed from the artistic, technological, sociological and psychological point of view. Possibilities of the innovative design of contemporary ornament will be analyzed, as well as technologies and practical issues.
Suitable geological composition of the soil in the basement of the church and unusually ingenious system of air vents allow the natural mummification of the dead, who were buried here. Within a few renovations, the original vents were damaged or submerged. Currently, several mummies damaged by microorganisms. The scope of work is to design measures to correct internal environment and the restoration of the original suitable microclimate. When the work will be used modern diagnostic methods and numerical models.
The topic of the thesis will be research and development of modern precast structures of piece building materials.
Research of elements and systems of buildings services as heating, ventilation and air conditioning (HVAC) will be conducted in order to achieve a thermal comfort in buildings at the minimum operating energy consumption. HVAC systems research will focus on optimizing of their design and operation with the use of low-potential thermal energy sources. The research will be conducted in its theoretical part by development of new mathematical-physical models, and by laboratory experiments and in situ measurements in an experimental part.
Theoretical modeling and experimental measurements of buildings included as pilot projects in the project TAČR CK Smart Regions.
Topic of doctoral thesis focuses on the application and verification of theoretical research methods airflow in buildings and external aerodynamics of buildings with the current transfer of moisture. The simulations can use the software Fluent, CFX, or OpenFOAM.
Clever town design and infrastructure with respect for low power consuption, application of renewable resources and and quality life conditions. Global trend is to increase concentration of population in relatively few large cities. Large dense cities can be highly productive, inovative, and per capita very green, and hence desirable for our future.
Tutor: Košíčková Ivana, Ing. arch., Ph.D.
Machines analysis in processes of fabric, selection, technical and economical characteristics, current methods calculation of machines capacity, data examination of capacity in praxis, effective capacity, effective design capacity, to create methodology of calculation of effective machines capacity and capacity graphs for analysis of time and technology structure.
Tutor: Motyčka Vít, doc. Ing., CSc.
Since the times of Industrial revolution technology became not only obvious part of architecture but even a significant source of its inspiration. It acted at the birth of Modern movement and its crutial impact has an effect till present. Effort will be focused to metamorphoses of the relations between technology and architecture since the end of 18th century until today.
Tutor: Nový Alois, prof. Ing. arch., CSc.
Requirements for reducing energy consumption in buildings evoke the need to increase the efficiency of technical systems. The study will be focused on the theoretical evaluation of the effectiveness of European standards and guidelines on monitoring existing systems and experimental determination of their efficacy. The expected result will also be the identification of ways to increase the efficiency of modern systems engineering environment.
Tutor: Rubinová Olga, Ing., Ph.D.
The work is focused on monitoring and subsequent evaluation of physical and technical properties of applied materials, thermal insulation systems of building envelopes when exposed to external environmental influences. From the test results will be verified durability of the materials and new solutions will be proposed and recommendations for restoration and repairs.
Tutor: Mohapl Martin, Ing., Ph.D.
The dissertation is focused on traditional form languages in architecture from the 19th until the 21st century, combining methods of historiography, design and technological research. The subject might be the analysis of the work of particular architect/s or architectural school, architecture in specific region or application of traditional design in the contemporary architecture and building technology.
Tutor: Fuciman Ondřej, Ing., Ph.D.
The structures of cross laminated timber panels has considerable potential for further development of wooden buildings. Modern timber technologies are applied in their production that the use of timber is optimized. The glues environmentally friendly are used to connect individual components. Wider application of these structures for buildings can be evaluated as a contribution to sustainable development.
Research on performance of buildings and building services in the smart regions in relation to buildings with active energy balance, the use of energy from renewable sources and application of BIM system in a management. Is connected to project TA CR - Smart Regions.
The work deals with the methodology of the pressure loss of air ducts with a view to more instability detection behavior of HVAC systems. This is especially practical usage often unsolvable problem in real traffic pressure difference between inlet and outlet air ducts. Part of the work will be theoretical and experimental methods to solve a clear methodological outputs for use in practice. As theoretical methods will be used mathematical modeling of pressure loss pipelines.
Economy of traditional industrialized countries is changing. Productions developed from Industrial revolution are moving Eastwards being substituted by intelligent technologies. What impact have such a changes on contemporary industrial architecture and town planning?
Industrial architectute is often considered less important then other building sorts in spite of the fact that it fundamentally assisted at the birth of Modern Movement. Evidence of its significance we can find in the work of the most famous authors both in history and present.
The impact of light on perception of architectural space. The use of computer technologies while creating the concept of light in exterior and interior.
Tutor: Odvárka Antonín, doc. Ing. arch., Ph.D.
The aim of the doctoral thesis is to analyse long-term behaviour of the additionally insulated building structures and to evaluate their influence on the duration of a building object lifetime. An important part of the work is the creation of draft conclusions for the use in construction practice, which will be based on the developed analysis.
The aim of the work is the search for optimal treatment method for substrate preparation before assembly external thermal insulation composite system. It will be dealt also with regard to the efficient use of financial cost and effort.
DhD thesis will focus on surveys of wood elements and structures, analysis of the causes of damage and resulting methods of reconstruction.
Machines analysis in processes of fabric, selection, technical and economical characteristics, current methods calculation of machines capacity, data examination of capacity in praxis, effective capacity, effective design capacity, to create methodology of calculation and capacity graphs for analysis of time and technology structure.