Publication detail

Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts

VRBKA, M. KŘUPKA, I. SVOBODA, P. ŠPERKA, P. NÁVRAT, T. HARTL, M. NOHAVA, J.

Original Title

Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts

Type

journal article - other

Language

English

Original Abstract

The effect of shot peening on rolling contact fatigue (RCF) and lubricant film thickness within nonconformal rolling/sliding contacts operated under mixed lubrication conditions was observed in this study. Rolling contact fatigue tests and film thickness measurements were carried out using specimens with modified surface topography by shot peening process using glass beads having diameter between 0.07 and 0.11 mm. It has been shown that the effect of shot peening on RCF has no positive effect even if shot peened surface of the roller exhibited somewhat higher hardness in contrast to the grounded surface. The reduction of RCF may be caused due to asperities interactions because after shot peening the surface roughness of the roller was increased. Film thickness measurements confirmed that the contact is realized actually only between asperity peaks of shot peened ball and smooth disc. Conversely, no negative effect on RCF was observed when the shot peened surface of the roller was polished. The polish of asperity peaks causes the creation of lands and micro-cavities, which may be employed as lubricant micro-reservoirs. From film thickness measurements it has been observed that lubricant emitted by shallow micro-cavities can provide the local increase in lubrication film thickness, which thereby reduces asperities interactions. Similar results were obtained for start-up conditions where the squeeze lubricant enlarges film thickness and reduces surface interactions. From the obtained results, it can be suggested that properly designed surface topography modification could help to increase the efficiency of lubrication films leading to the enhancement of contact fatigue life of non-conformal mixed lubricated rolling/sliding contacts.

Keywords

Surface topography modification, Shot peening, Rolling contact fatigue (RCF), Film thickness

Authors

VRBKA, M.; KŘUPKA, I.; SVOBODA, P.; ŠPERKA, P.; NÁVRAT, T.; HARTL, M.; NOHAVA, J.

RIV year

2011

Released

25. 6. 2011

Publisher

Elsevier

Location

Nizozemí

ISBN

0301-679X

Periodical

Tribology International

Year of study

44

Number

12

State

United Kingdom of Great Britain and Northern Ireland

Pages from

1726

Pages to

1735

Pages count

10

BibTex

@article{BUT74463,
  author="VRBKA, M. and KŘUPKA, I. and SVOBODA, P. and ŠPERKA, P. and NÁVRAT, T. and HARTL, M. and NOHAVA, J.",
  title="Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts",
  journal="Tribology International",
  year="2011",
  volume="44",
  number="12",
  pages="1726--1735",
  issn="0301-679X"
}