Přístupnostní navigace
E-application
Search Search Close
doc. Ing.
Ph.D.
FME, ISMMB DM – Associate professor
+420 54114 2860vlach.r@fme.vutbr.cz
Send BUT message
2023
PRUŠA, R.; HUZLÍK, R.; VLACH, R. Complex drive model of linear synchronous motor with variable load. MM Science Journal, 2023, vol. March 2023, iss. 1, p. 6398-6406. ISSN: 1803-1269.
WoS Article
2019
MUSIL, F.; VLACH, R. Coupled Model of Solenoid. In Mechatronics 2019: Recent Advances Towards Industry 4.0. Warsaw, Poland: Springer Verlag, 2019. p. 45-53. ISBN: 978-3-030-29992-7.
Paper in proceedings (conference paper)
VLACH, R.; MUSIL, F. Coupled Modeling of Permanent Magnet Generator Cooling using CFD. In 2018 18th International Conference on Mechatronics - Mechatronika (ME). 1. 2019. p. 564-569. ISBN: 978-80-214-5543-6.
2016
BÁRTA, J.; ONDRŮŠEK, Č.; LOŠÁK, P.; VLACH, R. Design of High-Speed Induction Machine for the 6 kW, 120 000 rpm Helium Turbo-Circulator. In USB Proceedings 2016 XXII International Conference on Electrical Machines (ICEM). 2016. p. 1552-1558. ISBN: 978-1-5090-2537-4.
VLACH, R.; HUZLÍK, R. Thermal Model of High Speed Asynchronous Machine. In Mechatronika 2016. 2016. p. 256-260. ISBN: 978-80-01-05882-4.
2014
NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Optimization of ceramics bonding in the area of pressure sensor manufacturing. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2014, vol. 20, iss. 4-5, p. 719-728. ISSN: 0946-7076.
LOŠÁK, P.; VLACH, R. Study of the response of the shaft loaded by Unbalanced Magnetic Pull. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014, 2014. p. 79-84. ISBN: 978-80-214-4817-9.
ANČÍK, Z.; HADAŠ, Z.; VLACH, R.; JANÁK, L.; SINGULE, V.; PROCHÁZKA, P. Simulation Modelling of MEMS Thermoelectric Generator for Aircraft Applications. In 16th INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC 2014). 1. Antalya: Gazi University, Turkey, 2014. p. 265-270. ISBN: 978-1-4799-2060-0.
VLACH, R. Novel Approach to Thermoelectric Generator Modeling as Energy Harvesting System. In Proceedings of the 16th International Conference on Mechatronics – Mechatronika 2014. 1. Brno: Brno University of technology, 2014. p. 725-728. ISBN: 978-80-214-4817-9.
2013
VLACH, R. Complex Model of Asynchronous Machine as Traction Machine in Mining. In Mechatronics 2013. 2013. p. 323-329. ISBN: 978-3-319-02293-2.
ANČÍK, Z.; VLACH, R.; JANÁK, L.; KOPEČEK, P.; HADAŠ, Z. Modeling, simulation and experimental testing of the MEMS thermoelectric generators in wide range of operational conditions. In Proceedings of SPIE Smart Sensors, Actuators, and MEMS IV. 8763. Bellingham, Washington, USA: SPIE, 2013. p. 87631M-1 (87631M-10 p.)ISBN: 9780819495600.
VLACH, R. Coupled Thermal-Structural Transient Analysis of Pressure Sensors. In Mechatronics 2013. 2013. p. 495-501. ISBN: 978-3-319-02293-2.
NOVOTNÝ, R.; VLACH, R.; KADLEC, J.; KUCHTA, R. Ceramic joints for pressure sensors development. In Proceedings of the SPIE, Volume 8763, id. 876309. 876309. Grenoble, France: Society of Photo-Optical Instrumentation Engineers (SPIE), 2013. p. 1-9. ISBN: 9780819495600.
2012
ANČÍK, Z.; TOMAN, J.; VLACH, R.; HUBÍK, V. Modeling of Thermal Phenomena in Liquid Cooling System for Aircraft Electric Unit. IEEE Transactions on Industrial Electronics, 2012, vol. 2011, iss. 99, p. 1 (1 s.). ISSN: 0278-0046.
Peer-reviewed article not indexed in WoS or Scopus
2011
VLACH, R. Thermal modelling of powerful traction battery charger. In Mechatronics Recent Technogical and Scientific Advances. 2011. p. 175-187. ISBN: 978-3-642-23243-5.
CHALUPA, M.; VEVERKA, J.; VLACH, R. DYNAMIC LOADING OF VEHICLE TRACK SIMULATION. In Engineering Mechanics 2011, 17th International conference may 9-12, 2011, Svratka, Czech republic. 2011. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic, 2011. p. 227-230. ISBN: 978-80-87012-33-8.
2010
VLACH, R. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In MENDEL 2010 - 16th International Conference on Soft Computing. Brno: 2010. p. 298-302. ISBN: 978-80-214-4120-0.
URBAN, F.; KADLEC, J.; VLACH, R.; KUCHTA, R. Design of pressure sensor based on optical fiber Bragg grating lateral deformation. SENSORS, 2010, vol. 10, iss. 12, p. 11212-11225. ISSN: 1424-8220.
2009
SIKORA, M.; VLACH, R. The Dynamic Model of Stirling Engine Crank Mechanism with Connected Electric Generator. Applied andComputational Mechanics, 2009, vol. 3, iss. 1, p. 185-194. ISSN: 1802-680X.
2008
KADLEC, J.; HELÁN, R.; URBAN, F.; VLACH, R.; VRBA, R. Temperature calibrated design of the optical pressure sensor capsule. In Proceedings of the EDS 08 conference. Brno: Ing. Zdeněk Novotný CSc., 2008. p. 1-6. ISBN: 978-80-214-3717-3.
2007
VLACH, R.; GREPL, R.; KREJČÍ, P. Control of Stator Winding Slot Cooling by Water Using Prediction of Heating. In ICM2007 4th IEEE international Conference on Mechatronics. Kumamoto,Japan: IEEE, 2007. p. 5-9. ISBN: 1-4244-1184-X.
VLACH, R. DC MACHINE COOLING BY HEAT PIPE. In LVEM - Low Voltage Electrical Machines 2007. Brno: 2007. p. 1-2. ISBN: 978-80-214-3560-5.
VLACH, R. Thermal model of control non-convectional winding slot cooling by water. In Modeling and optimalization of physical systems. 2007. p. 157-162.
KREJČÍ, P.; VLACH, R.; GREPL, R. Sensor of contact force vector. In ICM2007. Kumamoto. Japan: IEEE, 2007. p. 1-4. ISBN: 1-4244-1184-X.
VLACH, R. Predictor for Control of Stator Winding Water Cooling of Synchronous Machine. In Recent Advances in Mechatronics. Mech. Berlín: Springer, 2007. p. 190-194. ISBN: 978-3-540-73955-5.
SIKORA, M.; VLACH, R. Simulation of Stirling engine working cycle. In Recent Advances in Mechatronics. Mech. Berlin: Springer, 2007. p. 42-46. ISBN: 978-3-540-73955-5.
GREPL, R.; VLACH, R.; KREJČÍ, P. Modelling of Unilateral Constraints for Virtual Prototyping in SimMechanics. In Int. Conf. on Mechatronics. 1. Kumamoto: KUmamoto universtity, 2007. p. 37
SIKORA, M.; VLACH, R. Thermal Model of Stirling Engine with Using the Control Volumes Method. In Modelling and optimization of physical systems. Gliwice 2007. Gliwice, Polsko: Wydawnictwo Katedry Mechaniky Stosowanej, 2007. p. 137-142.
2006
VLACH, R. Control of Stator Winding Slot Cooling by Water. In Simulation Modeling of Mechatronics systems II. mechatronika. 2006. p. 75.ISBN: 80-214-3341-8.
Chapter in a book
VLACH, R.; SIKORA, M. Virtual Model of Stirling Engine. In Simulation Modeling of Mechatronic systems II. mechatronika. 2006. p. 215.ISBN: 80-214-3341-8.
GREPL, R., VLACH, R., KREJČÍ, P. An Effective Approach To Design Of Interactive Mechatronic System. In Engineering mechanics 2006. Svratka: ÚT AVČR, 2006. s. 82-83. ISBN: 80-86246-27-2.
VLACH, R., GREPL, R., KREJČÍ, P. Ŕízení nekonvenčního cházení statorového vinutí vodou. In Engineering Mechanics 2006. Praha: 2006. s. 1-2. ISBN: 80-86246-27-2.
SIKORA, M.; VLACH, R. The numerical model of alfa Stirling engine modification. In Simulation modelling of mechatronic system III. Mechatronics. Brno: Brno University of Technology, 2006. p. 219.ISBN: 978-80-214-3559-9.
KREJČÍ, P.; VLACH, R.; GREPL, R. CONTACT SENSOR FOR ROBOTIC APPLICATIONS - VERIFICATION OF FUNCTIONALITY. In Engineering Mechanics 2006. 1. Svratka: Ústav termomechniky AVČR, 2006. s. 182-183. ISBN: 80-86246-27-2.
2005
VLACH, R. PARAMETRICKÝ MODEL PŘÍMÉHO CHLAZENÍ VINUTÍ SYNCHRONNÍHO MOTORU VODOU. In Engeneering Mechanics 2005. 2005. s. 1-4. ISBN: 80-214-2940-4.
PÍŠTĚK, V.; NOVOTNÝ, P.; KAPLAN, Z.; VLACH, R. Virtual Prototypes of External Heat Supply Engines. In Simulation Modelling of Mechatronic Systems I. Mechatronika. Brno: Faculty of Mechanical Engineering, Brno University of Technology, 2005. p. 197.ISBN: 80-214-3144-X.
VLACH, R. COMPUTATIONAL AND EXPERIMENTAL MODELLING OF NON-CONVECTIONAL WINDING SLOT COOLING. Inženýrská mechanika - Engineering Mechanics, 2005, vol. 2005, iss. 12, p. 1-6. ISSN: 1210-2717.
VLACH, R. Parametric Model of Synchrnous Machine Winding Cooling by Heat Pipe. In Engineering Mechanics2005. Praha: 2005. s. 1-2. ISBN: 80-85918-93-5.
2004
GREPL, R., VLACH, R., ONDRŮŠEK, Č. Complex Dynamic Modelling of Mobile Robot. In Fracture Methodologies and Manufacturing Processes. ASME/JSME Pressure Vessels and Piping Conference. San Diego, USA: ASME, 2004. p. 1-7. ISBN: 0-7918-4669-5.
VLACH, R. Experimentální ověření vlastností tepelné trubice. In Modelování a měření v termomechnice kontinua. Plzeň: 2004. s. 1-5. ISBN: 80-02-01654-8.
VLACH, R., ONDRŮŠEK, Č. Cooling of Synchronous Machine Winding Using Heat Pipe. In Engineering Mechanics 2004. Praha: 2004. s. 1-7. ISBN: 80-85918-88-9.
VLACH, R., ONDRŮŠEK, Č. Comparison of Synchronous Machine Cooling Using Heat Pipe and Water Cooling. Elektronika, 2004, vol. 2004, iss. 8-9, p. 1-2. ISSN: 0033-2089.
VLACH, R. Chlazení elektrických strojů. Brno: 2004. 28 s. ISBN: 80-214-2848-1.
Book
VLACH, R., ONDRŮŠEK, Č., GREPL, R. Computational and Experimental Simulation of Synchronous Generator Ventilation. In Fracture Methodologies and Manufacturing Processes. San Diego: ASME, 2004. p. 1-6. ISBN: 0-7918-4669-5.
VLACH, R., ONDRŮŠEK, Č. Computational and Experimental Modeling of Synchronous Generator Fan. In Engineering Meachanics 2004. Praha: 2004. s. 1-11. ISBN: 80-85918-88-9.
2003
CHALUPA, M., VLACH, R., KOTEK, V. Choice Parameters Influence at Vehicle Track Behavior. In Engineering mechanics 2003. Brno: 2003. s. 1-2. ISBN: 80-86246-18-3.
GREPL, R., VLACH, R., KRATOCHVÍL, C. Návrh tepelného modelu stejnosměrného motoru pro řízené momentové přetěžování. In Výpočtová mechanika 2003. Plzeň: 2003. s. 1-6. ISBN: 80-7082-999-0.
VLACH, R., ONDRŮŠEK, Č. HEATING PREDICTION OF ELECTRIC MACHINE USING NEURAL NETWORK. In International Conference Mechatronics, Robotics and Biomechanics 2003. UMT FSI VUT Brno. Brno: 2003. p. 1-2. ISBN: 80-214-2312-9.
VLACH, R., ONDRŮŠEK, Č. Control of electric machine Ventilation Using Artificial intelligence. In Engineering mechanics 2003. Brno: 2003. s. 1-2. ISBN: 80-86246-18-3.
GREPL, R., VLACH, R. Computational Modelling of Thermal Behavior of DC Motor. In EPVE 2003. Brno: 2003. p. 1-4. ISBN: 80-214-2497-4.
VLACH, R., GREPL, R., CHALUPA, M., ONDRŮŠEK, Č. Výpočtové modelování dynamických vlastností pásového vozidla. In Computational Mechanics 2003. Plzeň: 2003. s. 1-4. ISBN: 80-7082-999-0.
VLACH, R. Výpočtově - experimentální modelování ventilátoru synchronního generátoru. In Vybrané problémy elektrických strojů a pohonů. Brno: 2003. s. 1-2. ISBN: 80-214-2400-1.
2002
GREPL, R., VLACH, R., ONDRŮŠEK, Č. Návrh tepelného modelu krokového motoru. In EPVE 2002. Brno, Česká republika: 2002. s. 1-4. ISBN: 80-214-2246-7.
VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. 2002. s. 1-8. ISBN: 80-214-2109-6.
VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. Brno: 2002. 143 s.
Dissertation
VLACH, R., ONDRŮŠEK, Č. Komplexní model synchronního motoru. In Inženýrská mechanika 2002. Brno: Institud of mechanics of solids, 2002. s. 1-2. ISBN: 80-214-2109-6.
VLACH, R. Řízení ventilace elektrického stroje s využitím umělé inteligence. 2002. 26 s.
VLACH, R., CHALUPA, M., KOTEK, V. Vliv vypraných parametrů na chování lyže pro jízdu po trávě. In Inženýrská mechanika 2002. Brno: 2002. s. 1-2. ISBN: 80-214-2109-6.
2001
VLACH, R. VENTILAČNÍ MĚŘENÍ SYNCHRONNÍHO MOTORU S VLASTNÍM ZDROJEM VENTILACE. In Vybrané problémy elektrických strojů a pohonů 2001. Brno: UVEE FEKT VUT Brno, 2001. s. 1-5. ISBN: 80-7580-125-2.
KREJČÍ, P., VLACH, R. Optimization of ventilation network parameters of asynchronous generator by genetic algorithm. Zeszyty Naukowe Politechniki Slaskej - Elektryka, 2001, vol. 177, iss. 05, p. 1-4. ISSN: 0072-4688.
VLACH, R. Modelování ventilace synchronního motoru pomocí CFD. In Měření, analýza a identifikace parametrů pro simulační modely asynchronních strojů. Brno: UVEE FEKT VUT Brno, 2001. s. 1-6. ISBN: 80-214-1979-2.
VLACH, R. Analýza chování lyže pro jízdu po trávě. In Inženýrská mechanika 2001. Praha: ČVUT Praha, 2001. s. 1-5. ISBN: 80-85918-64-1.
VLACH, R. 3D ventilační síť synchronního motoru se zdrojem cizí ventilace. In Aplikovaná mecchanika 2001. 2001. s. 1-4. ISBN: 80-217-1887-1.
2000
VLACH, R. Výpočtové modelování oteplení asynchronního dynamometru. In Aplikovaná elektromechanika 2000. Liberec: 2000. s. 1-4. ISBN: 80-7083-388-2.
VLACH, R. Controled of cooling of synchronous motor. In Sborník konference Diagnostika a aktivní řízení 2000. Třešť: VUT Brno, 2000. p. 1-6. ISBN: 80-214-1665-3.
*) Citations are generated once every 24 hours.