Přístupnostní navigace
E-application
Search Search Close
doc. Ing.
Ph.D.
FEEC, UETE – Associate professor
+420 54114 6129maxa@vut.cz
Send BUT message
2024
BAYER, R.; BAČA, P.; MAXA, J.; ŠABACKÁ, P.; BINAR, T.; VYROUBAL, P. CFD Analyses of Density Gradients under Conditions of Supersonic Flow at Low Pressures. SENSORS, 2024, vol. 24, no. 18, p. 1-32. ISSN: 1424-8220.Detail | WWW
MAXA, J.; ŠABACKÁ, P.; JAN, M.; NEDĚLA, V.; BINAR, T.; BAČA, P.; TALÁR, J.; BAYER, R.; ČUDEK, P. The Impact of Nozzle Opening Thickness on Flow Characteristics and Primary Electron Beam Scattering in an Environmental Scanning Electron Microscope. SENSORS, 2024, vol. 24, no. 7, p. 1-27. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
MAXA, J.; NEDĚLA, V.; ŠABACKÁ, P.; BINAR, T. Mathematical Physics Analysis of Nozzle Shaping at the Gas Outlet from the Aperture to the Differentially Pumped Chamber in Environmental Scanning Electron Microscopy (ESEM). SENSORS, 2024, vol. 24, no. 10, p. 1-26. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
ŠABACKÁ, P.; MAXA, J.; ŠVECOVÁ, J.; TALÁR, J.; BINAR, T.; BAYER, R.; BAČA, P.; DOSTALOVÁ, P.; ŠVARC, J. Mathematical-Physics Analyses of the Nozzle Shaping at the Aperture Gas Outlet into Free Space under ESEM Pressure Conditions. SENSORS, 2024, vol. 24, no. 11, p. 1-26. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
2023
MAXA, J.; NEDĚLA, V.; ŠABACKÁ, P.; BINAR, T. Impact of Supersonic Flow in Scintillator Detector Apertures on the Resulting Pumping Effect of the Vacuum Chambers. SENSORS, 2023, vol. 23, no. 10, p. 1-38. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
BAYER, R.; MAXA, J.; ŠABACKÁ, P.; DOSTALOVÁ, P. Tilt angle adjustment for solar panels mounted on solar ships to optimize the charging cycle of connected batteries. Advanced Batteries, Accumulators and Fuel Cells. first. Brno: 2023. p. 121-125. ISBN: 978-80-214-6176-5.Detail
ŠABACKÁ, P.; MAXA, J.; BAYER, R.; BINAR, T.; BAČA, P.; DOSTALOVÁ, P.; MAČÁK, M.; ČUDEK, P. Comparative Analysis of Supersonic Flow in Atmospheric and Low Pressure in the Region of Shock Waves Creation for Electron Microscopy. SENSORS, 2023, vol. 23, no. 24, p. 1-34. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
2022
BINAR, T.; ZIMÁKOVÁ, J.; BAČA, P.; MAXA, J.; FOLK, J. ÚČINKY TEPLOTY OKOLÍ NA VLASTNOSTI OLOVĚNÉHO AKUMULÁTORU. Blansko: Česká elektrotechnická společnost, 2022. p. 1-3. Detail
MAXA, J. Mathematical and Physical Analysis of Waste Heat Dissipation During Compression of Air Used as Energy Storage. Advanced Batteries Accumulators and Fuel Cells – 23rd ABAF. Brno: Brno University of Technology. Brno: Brno University of Technology, 2022. p. 196-198. ISBN: 978-80-214-6088-1.Detail
MAXA, J. Evaluation of Ballistic Coefficient for .223 rem Projectiles. Advanced Batteries Accumulators and Fuel Cells – 23rd ABAF. Brno: Brno University of Technology. Brno: Brno University of Technology, 2022. p. 193-195. ISBN: 978-80-214-6088-1.Detail
MAXA, J. Mathematical and physical analysis of air compression waste heat dissipation used as energy storage. Journal of Physics: Conference Series, 2022, vol. 2022, no. 1, ISSN: 1742-6596.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; BAYER, R.; VYROUBAL, P.; BINAR, T. Slip flow analysis in an experimental chamber simulating dif-ferential pumping in the Environmental Scanning Electron Microscope. SENSORS, 2022, vol. 22, no. 23, p. 1-24. ISSN: 1424-8220.Detail | WWW
MAČÁK, M.; VYROUBAL, P.; KAZDA, T.; CAPKOVÁ, D.; MAXA, J. Numerical Modelling of Discharging the Lithium-Sulphur Batteries in Ansys Fluent. Advances in Military Technology, 2022, vol. 17, no. 2, p. 163-177. ISSN: 1802-2308.Detail | WWW
2021
ŠABACKÁ, P.; MAXA, J.; MAXA, F. Mathematical-physical analysis of Drag Force of a .223 Remington caliber projectile. Advanced Batteries Accumulators and Fuel Cells – 22nd ABAF. Brno: Brno University of Technology. 2021. p. 169-172. ISBN: 978-80-214-5975-5.Detail
BAYER, R.; MAXA, J.; ŠABACKÁ, P. Energy Harvesting Using Thermocouple and Compressed Air. SENSORS, 2021, vol. 21, no. 18, p. 1-15. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
MAXA, J.; ŠABACKÁ, P.; BAYER, R. Analysis of the effect of reflected shock waves in the experimental chamber of diferential pumping. Advanced Batteries Accumulators and Fuel Cells – 22nd ABAF. Brno: Brno University of Technology. 2021. p. 256-259. ISBN: 978-80-214-5975-5.Detail
ŠABACKÁ, P.; MAXA, J.; VYROUBAL, P. Velocity and Temperature Profile Analyzes in Supersonic Flow in the Experimental System. In ABAF 21st issue of ECS Transactions. ECS Transactions. 99. 2021. p. 325-331. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; MAXA, F. Mathematical-physical analysis of Drag Force of a .223 REM caliber projectile. In ECS Transactions. ECS Transaction. 105. 2021. p. 637-646. ISBN: 978-1-60768-864-8. ISSN: 1938-6737.Detail
MAXA, J.; ŠABACKÁ, P.; BAYER, R. Analysis of the effect of reflected shock waves in the experimental chamber. In ECS Transactions. ECS Transaction. 105. 2021. p. 589-600. ISBN: 978-1-60768-864-8. ISSN: 1938-6737.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; MAXOVÁ, A. Math - Phys Analysis of the effect of conical and detached shock waves at the tip of a static probe in an experimental chamber. Advanced Batteries Accumulators and Fuel Cells – 22nd ABAF. Brno: Brno University of Technology. 2021. p. 165-168. ISBN: 978-80-214-5975-5.Detail
ŠABACKÁ, P.; MAXA, J.; MAXOVÁ, A. Mathematical and Physical Analysis of the effect of conical and detached shock waves at the tip of a static probe in an experimental chamber. In ECS Transactions. ECS Transaction. 105. 2021. p. 627-636. ISBN: 978-1-60768-864-8. ISSN: 1938-6737.Detail | WWW
ŠABACKÁ, P.; NEDĚLA, V.; MAXA, J.; BAYER, R. Application of Prandtl’s Theory in the Design of an Experimental Chamber for Static Pressure Measurements. SENSORS, 2021, vol. 21, no. 20, p. 1-13. ISSN: 1424-8220.Detail | WWW | Full text in the Digital Library
2020
MAXOVÁ, A.; MAXA, J.; ŠABACKÁ, P. Temperature running simulations during the pumping of chambers separated by a small aperture. 21st ABAF. 2020. p. 123-126. ISBN: 978-80-214-5774-4.Detail
MAČÁK, M.; VYROUBAL, P.; MAXA, J. Numerical Model of Multiphase Catalytic Reactions. The 4th International Conference on Nanomaterials: Fundamentals and Applications. 1. Košice: Pavol Jozef Šafárik University in Košice, 2020. p. 74-77. ISBN: 978-80-8152-941-2.Detail | WWW
MAXOVÁ, A.; MAXA, J.; ŠABACKÁ, P. The Impact of Pumping Velocity on Temperature Running in Chambers of Experimental System. In ECS Transactions. ECS Transaction. 99. IOP Publishing Ltd, 2020. p. 317-323. ISBN: 9781607685395. ISSN: 1938-6737.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; VYROUBAL, P. Temperature profile analysis in supersonic flow in the experimental chamber. 21st ABAF. 2020. p. 119-122. ISBN: 978-80-214-5109-4.Detail
2019
MAXOVÁ, A.; ŠABACKÁ, P.; MAXA, J. Comparison of the Ansys Fluent system solvers for the possibility of supersonic flow solving at the low pressures. In ABAF 20th issue of ECS Transactions. ECS Transaction. USA: The Electrochemical Society, 2019. p. 475-481. ISBN: 9781607688877. ISSN: 1938-6737.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; VYROUBAL, P. Comparative analysis of inserted temperature probe in the differentially pumped. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. Brno: Brno University of Technology, 2019. p. 183-186. ISBN: 978-80-214-5774-4.Detail | WWW
VYROUBAL, P.; MAXA, J.; HLAVATÁ, P.; MAČÁK, M. MODELOVÁNÍ PROUDĚNÍ VĚTRU KRAJINOU. In 40. Nekonvenční zdroje elektrické energie. Vémyslice: Tribun EU, 2019. p. 128-131. ISBN: 978-80-02-02858-1.Detail
MAXOVÁ, A.; ŠABACKÁ, P.; MAXA, J. Comparison of the solver setting in Ansys Fluent system. In Advanced Batteries Accumulators and Fuel Cells – 20th ABAF. 1. Brno: Brno University of Technology, 2019. p. 187-190. ISBN: 978-80-214-5774-4.Detail | WWW
Hlavata, P.; Maxa, J. FLOW ANALYSIS OF THE PRESSURE DISTRIBUTION IN THE EXPERIMENTAL CHAMBER OF THE DIFFERENTIAL PUMPING. Annals of Petrosani University - Mechanical Engineering -, 2019, vol. 20, no. 1, p. 33-40. ISSN: 1454-9166.Detail | WWW
BAYER, R.; MAXA, J.; ŠABACKÁ, P. POWER STABILITY AND EFFECTIVITY OF PHOTOVOLTAIC PANELS MOUNTED ON SIDES OF A SHIP. In 40. Nekonvenční zdroje elektrické energie. 1. Česká Republika: Tribun EU s.r.o., 2019. p. 6-9. ISBN: 978-80-02-02858-1.Detail
MAXA, J.; ŠABACKÁ, P.; VYROUBAL, P. Analysis of impact of conic aperture in differentially pumped chamber. Advances in Military Technology, 2019, vol. 14, no. 1, p. 151-161. ISSN: 1802-2308.Detail | WWW
ŠABACKÁ, P.; MAXA, J.; VYROUBAL, P. Correction of the supersonic flow impact on the results of the inserted temperature probe in the differentially pumped chamber. In ABAF 20th issue of ECS Transactions. ECS Transaction. USA: The Electrochemical Society, 2019. p. 491-496. ISBN: 9781607688877. ISSN: 1938-6737.Detail | WWW
MAČÁK, M.; VYROUBAL, P.; MAXA, J. Magnetohydrodynamic Model of Electric Arc during Contact Opening. Advances in Military Technology, 2019, vol. 14, no. 2, p. 347-361. ISSN: 1802-2308.Detail | WWW
2018
VYROUBAL, P.; KAZDA, T.; MAXA, J.; MAČÁK, M. Finite Element Approach of Interior Permanent Magnet Motor Acoustics Noise. Advances in Military Technology, 2018, no. 2, p. 223-235. ISSN: 1802-2308.Detail | WWW
HLAVATÁ, P.; MAXA, J.; VYROUBAL, P. Design of the conic static probe tip of the Pitot’s tube in experimental chamber. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Brno: Brno University of Technology, 2018. p. 58-61. ISBN: 978-80-214-5651-8.Detail
HLAVATÁ, P.; MAXA, J.; VYROUBAL, P. Mathematical - physics evaluation of the flow in the experimental chamber. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Brno: Brno University of Technology, 2018. p. 54-57. ISBN: 978-80-214-5651-8.Detail
HLAVATÁ, P.; MAXA, J.; VYROUBAL, P. Flow evaluation in the experimental chamber for supersonic flow in low pressures. In ECS Transactions. ECS Transactions. 2018. p. 50-56. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
VYROUBAL, P.; ŠIMONOVÁ, L.; HLAVATÁ, P.; MAXA, J. Numerical Model of the Simple Thermophotovoltaic Structure. In ECS Transactions. ECS Transactions. 2018. p. 50-61. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
HLAVATÁ, P.; MAXA, J.; VYROUBAL, P. Analysis of Pitot tube static probe angle in the experimental chamber conditions. In ECS Transactions. ECS Transactions. 2018. p. 50-56. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
FIALA, P.; MAXA, J. Numerical Models of a Multilayered Graphene Structure. In Progress in Electromagnetics Research Symposium (PIERS-Toyama). Progress In Electromagnetics. Toyama, Japan: IEEE, 2018. p. 527-532. ISBN: 978-4-88552-316-8. ISSN: 1559-9450.Detail | WWW
MAXA, J.; HLAVATÁ, P.; VYROUBAL, P. Analysis of the Impact of the Conic Aperture in the Differentially Pumped Chamber. Advances in Military Technology, 2018, no. 1, p. 50-61. ISSN: 1802-2308.Detail
MAXA, J.; HLAVATÁ, P.; VYROUBAL, P. Comparative analysis of ideal and real gas in pumping of the experimental chamber. In Advanced Batteries Accumulators and Fuel Cells – 19th ABAF. Brno: Brno University of Technology, 2018. p. 50-53. ISBN: 978-80-214-5651-8.Detail
MAXA, J.; HLAVATÁ, P.; VYROUBAL, P. Using the ideal and real gas model for the mathematical - physics analysis of the experimental chambre. In ECS Transactions. ECS Transactions. 2018. p. 377-387. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail | WWW
2017
HÁJKOVÁ, V.; MAXA, J.; HLAVATÁ, P.; BÍLEK, M. Design of the shape of the experimental chamber for the analysis of the pressure layout in the differential pumped chamber. In ECS Transactions. ECS Transactions. 81. Electrochemical Society Inc., 2017. p. 329-335. ISBN: 9781607688297. ISSN: 1938-5862.Detail | WWW
LEPLTOVÁ, K.; MAXA, J.; HLAVATÁ, P.; BÍLEK, M. Design of the shape of the experimental chamber for the analysis of the velocity layout in the differential pumped chamber. In ECS Transactions. ECS Transactions. 81. Electrochemical Society Inc., 2017. p. 323-328. ISBN: 9781607688297. ISSN: 1938-5862.Detail | WWW
BÍLEK, M.; MAXA, J.; HLAVATÁ, P.; BAYER, R. Modelling and simulation of a velocity field within supersonic flows in low-pressure areas. In ECS Transactions. ECS Transactions. 2017. p. 311-316. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
HLAVATÁ, P.; MAXA, J.; BÍLEK, M.; LEPLTOVÁ, K.; BAYER, R. Influence of Critical Flow in the Differentially Pumped Chamber AQUASEM. Advances in Military Technology, 2017, no. 2, p. 301-310. ISSN: 1802-2308.Detail
HLAVATÁ, P.; MAXA, J.; BÍLEK, M.; VYROUBAL, P. Impact of the shape of the differentially pumped chamber on critical flow character. Advanced Batteries Accumulators and Fuel Cells - 18th ABAF. 18. Brno: Brno University of Technology, 2017. p. 161-163. ISBN: 978-80-214-5529-0.Detail
HLAVATÁ, P.; MAXA, J.; BÍLEK, M.; VYROUBAL, P. Impact of the shape of the differentially pumped chamber on critical flow character. In ECS Transactions. ECS Transactions. 81. Electrochemical Society Inc., 2017. p. 317-322. ISBN: 9781607688297. ISSN: 1938-5862.Detail | WWW
LEPLTOVÁ, K.; MAXA, J.; HLAVATÁ, P.; BÍLEK, M. Design of the shape of the experimental chamber for the analysis of the velocity layout in the differential pumped chamber. Advanced Batteries Accumulators and Fuel Cell - 18th ABAF. 18. Brno: Brno University of Technology, 2017. p. 151-153. ISBN: 978-80-214-5529-0.Detail
VYROUBAL, P.; MAXA, J. NUMERICAL METHODS IN RENEWABLE ENERGY SOURCES – FAMILY HOUSE HEATING. In ZBORNÍK MEDZINÁRODNEJ KONFERENCIE RESpect 2017. 1. Košice: 2017. p. 159-162. ISBN: 978-80-553-3147- 8.Detail | WWW
VYROUBAL, P.; KAZDA, T.; MAXA, J. Coupled Field Numerical Model of Lithium Ion Battery Damage. In ECS Transactions. ECS Transactions. 2017. p. 15-21. ISSN: 1938-5862.Detail
BAYER, R.; MAXA, J. Increasing Accuracy of Simulations of Gas Flowing into Low-Pressure Areas Using Optical Methods on Shockwaves. In Advanced Batteries Accumulators and Fuel Cells – 18th ABAF. ECS Transactions. 18. Brno: Brno University of Technology, 2017. p. 179-181. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J. Coupled Field Analysis of Electric Vehicle. In Advanced Batteries Accumulators and Fuel Cells – 18th ABAF. 18. Brno: Brno Universtiy of Technology, 2017. p. 84-86. ISBN: 978-80-214-5529-0.Detail
HÁJKOVÁ, V.; MAXA, J.; HLAVATÁ, P.; BÍLEK, M. Design of the shape of the experimental chamber for the analysis of the pressure layout in the differential pumped chamber. Advanced Batteries Acumulators and Fuel Cells - 18th ABAF. 18. Brno: Brno University of Technology, 2017. p. 158-160. ISBN: 978-80-214-5529-0.Detail
2016
MAXA, J.; BÍLEK, M.; HLAVATÁ, P.; VYROUBAL, P.; LEPLTOVÁ, K. Comparisons Using Methods of Continuum Mechanics and Monte Carlo at Differentially Pumped Chamber. Advances in Military Technology, 2016, vol. 11, no. 2, p. 143-150. ISSN: 1802-2308.Detail | WWW | Full text in the Digital Library
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J.; SEDLAŘÍKOVÁ, M.; TICHÝ, J.; CIPÍN, R. 3D Modelling and Study of Electrochemical Characteristics and Thermal Stability of Commercial Accumulator by Simulation Methods. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2016, no. 11, p. 1938-1950. ISSN: 1452-3981.Detail | WWW
BÍLEK, M.; MAXA, J.; HLAVATÁ, P. Comparison of Results obtained using Different Turbulence Models in Analysis Differentially Pumped Chamber. In ECS Transactions. ECS Transactions. The Electrochemical Society, 2016. p. 259-266. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail | WWW
VYROUBAL, P.; KAZDA, T.; MAXA, J. FEM Model of Lithium Ion Battery Temperature Field. In Advanced Batteries Accumulators and Fuel Cells – 17th ABAF. Brno: Brno University of Technology, 2016. p. 68-69. ISBN: 978-80-214-5384- 5.Detail
BÍLEK, M.; HLAVATÁ, P.; MAXA, J. Comparison of Results obtained using Monte Carlo and ANSYS Fluent in Analysis Differentially Pumped Chamber. In Proceedings of the 22 Conference STUDENT EEICT 2016. 2016. p. 600-604. ISBN: 978-80-214-5350- 0.Detail | WWW
BAYER, R.; MAXA, J. Analysis of whirling of gas flow within the specimen chamber of ESEM. In Proceedings of the 22nd Conference STUDENT EEICT 2016. Brno: Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních, 2016. p. 595-599. ISBN: 978-80-214-5350- 0.Detail
VYROUBAL, P.; MAXA, J.; BAČA, P.; KAZDA, T. Numerické modelování v aplikacích nekonvenčních zdrojů elektrické energie. 37. Nekonvenční zdroje elektrické energie. Brno, Česká republika: Česká elektrotechnická společnost, 2016. p. 134-137. ISBN: 9788002026532.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J. Finite Element Model of Discharging and Temperature Field of the Lithium Ion Battery. In ECS Transactions. ECS Transactions. 2016. p. 3-8. ISBN: 978-80-214-5109-4. ISSN: 1938-5862.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J. Moderní přístup k numerickému modelování bezpečnosti lithium iontových akumulátorů při zkratu. In Fotovoltaické Fórum a Energetická konference 2016. Praha: Česká fotovoltaická asociace, 2016. p. 50-56. ISBN: 978-80-906281-3- 7.Detail
FIALA, P.; STEINBAUER, M.; KŘÍŽ, T.; MAXA, J. Numerical models of a graphene coaxial line. In 2016 Progress In Electromagnetics Research Symposium (PIERS). Shanghai, CHINA: Institute of Electrical and Electronics Engineers, Inc., 2016. p. 1800-1804. ISBN: 978-1-5090-6093-1.Detail | WWW
2015
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J.; TICHÝ, J. Analýza teplotního pole při vybíjení li- ion baterie. In 36. Nekonvenční zdroje elektrické energie. Brno: Tribun EU s.r.o., 2015. p. 152-155. ISBN: 978-80-02-02593- 1.Detail
VYROUBAL, P.; HLADKÝ, D.; HLAVATÁ, P.; MAXA, J.; VANĚK, J. Využití odpadního tepla fotovoltaických panelů. In 36. Nekonvenční zdroje elektrické energie. 2015. p. 50-53. ISBN: 978-80-02-02593- 1.Detail
BÍLEK, M.; MAXA, J.; VYROUBAL, P. Optimalizace tvaru sacích kanálů diferenciálně čerpané komory pomocí modelování dynamiky proudění tekutin. In Elektrotechnika a informatika 2015. Plzeň: Tribun EU s.r.o., 2015. p. 11-14. ISBN: 978-80-261-0514- 5.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J. Analysis of Temperature Field in Lithium Ion Battery. In 16th ABAF International Conference proceeding. Brno: Brno University of Technology, FEKT, UETE, 2015. p. 65-66. ISBN: 978-80-214-5109- 4.Detail | WWW
VYROUBAL, P.; MAXA, J.; HLADKÝ, D. Concentrator Photovoltaic Panel in Practice – Heating of the Family House. In 16th ABAF International Conference proceeding. Brno: Brno University of Technology, FEKT, UETE, 2015. p. 147-148. ISBN: 978-80-214-5109- 4.Detail | WWW
VYROUBAL, P.; MAXA, J.; BAČA, P. Optimization of Lead Acid Battery Grid Shapes. In 16th ABAF International Conference proceeding. Brno: Brno University of Technology, FEKT, UETE, 2015. p. 120-122. ISBN: 978-80-214-5109- 4.Detail | WWW
BAYER, R.; MAXA, J.; VYROUBAL, P. Analýza proudění plynu v komoře vzorku EREM simulační metodou. In Elektrotechnika a informatika 2015. Plzeň: Tribun EU s.r.o., 2015. p. 3-6. ISBN: 978-80-261-0514- 5.Detail
VYROUBAL, P.; MAXA, J.; KAZDA, T. MODEL TEPLOTNÍHO POLE LI- ION AKUMULÁTORU PŘI NABÍJENÍ. In Alternatívne zdroje energie, ALER 2015. 2015. p. 44-49. ISBN: 978-80-89456-22- 2.Detail
VYROUBAL, P.; MAXA, J.; HLAVATÁ, P.; HLADKÝ, D. Concentrator Photovoltaic Cells in Practice – Family House Heating. In ECS Transactions. ECS Transactions. 2015. p. 223-228. ISSN: 1938- 5862.Detail
VYROUBAL, P.; MAXA, J.; BAČA, P. Optimization of Lead Acid Battery Grid Shapes by Discharging. In ECS Transactions. ECS Transactions. 2015. p. 263-267. ISSN: 1938- 5862.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J. Analysis of Temperature Field in Lithium Ion Battery by Discharging. In ECS Transactions. ECS Transactions. 2015. p. 269-273. ISSN: 1938- 5862.Detail
VANÝSEK, P.; VYROUBAL, P.; HAŇKA, J.; NOVÁK, V.; MAXA, J. Finite Elements Approach to Predicting Impedance Response of Geometrically Convoluted Samples. ECS Meeting Abstracts, 228th ECS Meeting. Pennington, NJ USA: The Electrochemical Society, 2015. ISSN: 2151- 2043.Detail | WWW
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J.; TICHÝ, J. Analýza teplotního pole při vybíjení lithium iontové baterie. HW server s.r. o, 2015, no. 10, p. 1-3. ISSN: 1803- 6392.Detail | WWW
VYROUBAL, P.; MAXA, J.; BAČA, P. MODEL PROUDOVÉHO POLE OLOVĚNÉHO AKUMULÁTORU. In Alternatívne zdroje energie, ALER 2015. 2015. p. 50-53. ISBN: 978-80-89456-22- 2.Detail
2014
VYROUBAL, P.; MAXA, J.; KAZDA, T.; VONDRÁK, J. Computational Modeling of Lithium Ion Battery. In 15th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2014). ECS Transactions. 2014. p. 99-110. ISBN: 978-1-62332-230- 4. ISSN: 1938- 5862.Detail
MAXA, J.; VYROUBAL, P.; ŠIMONOVÁ, L. Thermal Analysis of Thermophotovoltaic Emitter. In Advanced Batteries Accumulators and Fuel Cells – 15th ABAF. Brno: Brno University of Technology, 2014. p. 140-142. ISBN: 978-80-214-5008- 0.Detail
MAXA, J.; VYROUBAL, P.; ŠIMONOVÁ, L. Thermal Study of the Thermophotovoltaic Emitter. In 15th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2014). ECS Transactions. 2014. p. 175-181. ISBN: 978-1-62332-230- 4. ISSN: 1938- 5862.Detail
MAXA, J.; NEDĚLA, V.; LEPLTOVÁ, K.; VYROUBAL, P.; VACULÍK, S.; HLAVATÁ, P. Use systems for the analysisof gas flow. In Workshop of Interesting Topics of SEM and ESEM. Mikulov: Brno: Tribun EU s. r. o., 2014. p. 42-45. ISBN: 978-80-87441-12- 1.Detail
VACULÍK, S.; VYROUBAL, P.; MAXA, J.; VANĚK, J. Thermal Analysis of the Photovoltaic Concentrator Cell. In Advanced Batteries Accumulators and Fuel Cells – 15th ABAF. Brno: Brno University of Technology, 2014. p. 147-149. ISBN: 978-80-214-5008- 0.Detail
VYROUBAL, P.; KAZDA, T.; MAXA, J.; VONDRÁK, J. Numerical Study of Lithium Ion Battery. In Advanced Batteries Accumulators and Fuel Cells – 15th ABAF. Brno: Brno University of Technology, 2014. p. 78-81. ISBN: 978-80-214-5008- 0.Detail
VYROUBAL, P.; MAXA, J.; VANĚK, J. Chlazení koncentrátorového solárního článku s podporou CAx systémů. Energetika, 2014, vol. 64, no. 3, p. 136-140. ISSN: 0375- 8842.Detail
VYROUBAL, P.; MAXA, J.; BAČA, P.; TICHÝ, J. Simulation of Charging and Discharging Process in the Lead Acid Battery. In ECS Transactions. ECS Transactions. San Francisco: 2014. p. 105-113. ISBN: 978-1-56677-988-3. ISSN: 1938-5862.Detail
VYROUBAL, P.; MAXA, J.; KAZDA, T.; VONDRÁK, J. The Finite Element Method in Electrochemistry – Modelling of the Lithium-Ion Battery. In 13th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2012). ECS Transactions. San Francisco: 2014. p. 289-296. ISBN: 978-1-62332-031-7. ISSN: 1938-5862.Detail
LEPLTOVÁ, K.; MAXA, J.; NEDĚLA, V.; VYROUBAL, P.; VACULÍK, S.; HLAVATÁ, P. Analysis of the gas flow. In Workshop of Interesting Topics of SEM and ESEM. Mikulov: Brno: Tribun EU s. r. o., 2014. p. 46-48. ISBN: 978-80-87441-12- 1.Detail
VACULÍK, S.; VYROUBAL, P.; MAXA, J.; VANĚK, J. Optimization of Temperature Profile in Concentrator Photovoltaic Cell. In 15th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2014). ECS Transactions. San Francisco: 2014. p. 199-206. ISBN: 978-1-62332-230-4. ISSN: 1938-5862.Detail
VYROUBAL, P.; MAXA, J.; KAZDA, T. Simulation of the Behavior of the Lithium Ion Battery. Advances in Military Technology, 2014, vol. 9, no. 1, p. 107-115. ISSN: 1802- 2308.Detail
VYROUBAL, P.; TOŠER, P.; MAXA, J.; BAČA, P.; VACULÍK, S. Simulation of Current Distribution in Lead Acid Battery Grid Using FEM. In Advanced Batteries Accumulators and Fuel Cells – 15th ABAF. Brno: Brno University of Technology, 2014. p. 170-172. ISBN: 978-80-214-5008- 0.Detail
VYROUBAL, P.; MAXA, J.; VANĚK, J.; KŘIVÍK, P.; SOLČANSKÝ, M. The Finite Volume Method in Photovoltaic - The Cooling System of Concentrator Solar Panels. In 13th International Conference on Advanced Batteries, Accumulators and Fuel Cells (ABAF 2012). ECS Transactions. San Francisco: 2014. p. 255-264. ISBN: 978-1-62332-031-7. ISSN: 1938-5862.Detail
2013
VYROUBAL, P.; MAXA, J.; BAČA, P. NUMERICKÝ MODEL OLOVĚNÉHO AKUMULÁTORU. In 34. Nekonvenční zdroje elektrické energie. Blansko: Česká elektrotechnická společnost, 2013. p. 47-50. ISBN: 978-80-02-02458- 3.Detail
VYROUBAL, P.; MAXA, J.; KAZDA, T.; VONDRÁK, J.; TICHÝ, J. Numerical simulation of lithium ion battery. In Advanced Batteries Accumulators and Fuel Cells – 14th ABAF. Brno: Brno University of Technology, 2013. p. 74-77. ISBN: 978-80-214-4767- 7.Detail
VYROUBAL, P.; MAXA, J. The Aperture with Laval Nozzle in Secondary Electron Detector for Environmental Scanning Electron Microscopy. In Computer Software and Hardware Applications. 1. Vsetín 2012: Silhavy sro (Scientfic Press), 2013. p. 87-95. ISBN: 978-80-904741-2- 3.Detail
MAXA, J.; VYROUBAL, P.; VANĚK, J.; LEPLTOVÁ, K. POČÍTAČOVÁ PODPORA NÁVRHU CHLAZENÍ KONCENTRÁTOROVÉHO SOLÁRNÍHO PANELU. In 34. Nekonvenční zdroje elektrické energie. Blansko: Česká elektrotechnická společnost, 2013. p. 51-54. ISBN: 978-80-02-02458- 3.Detail
MAXA, J.; VYROUBAL, P.; VANĚK, J.; HLADKÁ, K. Analysis of using the air for solar panel cooling with ANSYS system. In Advanced Batteries Accumulators and Fuel Cells – 14th ABAF. Brno: Brno University of Technology, 2013. p. 78-80. ISBN: 978-80-214-4767- 7.Detail
VYROUBAL, P.; MAXA, J.; NEDĚLA, V.; JIRÁK, J.; HLADKÁ, K. Apertures with Laval nozzle and circular orifice in secondary electron detector for environmental scanning electron microscope. Advances in Military Technology, 2013, vol. 8, no. 1, p. 59-69. ISSN: 1802- 2308.Detail
VYROUBAL, P.; MAXA, J.; BAČA, P. Matematický model a numerická simulace olověného akumulátoru. Electrorevue, 2013, vol. 2013, no. 2, p. 1-4. ISSN: 1336- 8559.Detail
MAXA, J.; VYROUBAL, P.; VANĚK, J.; HLADKÁ, K. Aplikace CAE systémů při návrhu vzduchem chlazeného koncentrátorového solárního panelu. Electrorevue, 2013, vol. 2013, no. 4, p. 1-5. ISSN: 1336- 8559.Detail
2012
MAXA, J.; NEDĚLA, V.; JIRÁK, J.; VYROUBAL, P.; HLADKÁ, K. Analysis of gas flow in a secondary electron scintillation detector for ESEM with a new system of pressure limiting apertures. Advances in Military Technology, 2012, vol. 7, no. 2, p. 39-44. ISSN: 1802- 2308.Detail
MAXA, J.; VYROUBAL, P.; VANĚK, J.; SOLČANSKÝ, M. Využití počítačové simulace při návrhu chlazení koncentrátorových solárních systémů. ElectroScope - http://www.electroscope.zcu. cz, 2012, vol. 2012, no. 4, p. 1-6. ISSN: 1802- 4564.Detail
MAXA, J.; VYROUBAL, P.; VANĚK, J.; SOLČANSKÝ, M. DESIGN AND OPTIMALIZATION OF CONCENTRATOR SOLAR PANELS COOLING SYSTEM USING COMPUTER SIMULATION. In Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings. Brno: Brno University of Technology, 2012. p. 325-332. ISBN: 978-80-214-4610- 6.Detail
MAXA, J.; NEDĚLA, V.; JIRÁK, J. Analysis Of Gas Flow In The New System Of Apertures In The Secondary Electron Scintillation Detector For ESEM. MICROSCOPY AND MICROANALYSIS, 2012, vol. 2012(18), no. Suppl 2, p. 1264-1265. ISSN: 1431-9276.Detail
VYROUBAL, P.; MAXA, J.; TICHÝ, J.; BAČA, P.; KŘIVÍK, P. SIMULATION AND MATHEMATICAL DESCRIPTION OF CHARGING AND DISCHARGING OF THE LEAD ACID ACCUMULATOR. In Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings. Brno: Brno University of Technology, 2012. p. 213-219. ISBN: 978-80-214-4610- 6.Detail
VYROUBAL, P.; MAXA, J. Analysis of the Impact of Supersonic Flow in Detector of Secondary Electrons ESEM. In 2nd Computer Science On- Line Conference in 2012. 1. Vsetín: Silhavy sro., 2012. p. 149-155. ISBN: 978-80-904741-1- 6.Detail
VYROUBAL, P.; VANĚK, J.; MAXA, J.; SOLČANSKÝ, M. APLIKACE CAE SYSTÉMŮ PŘI NÁVRHU CHLAZENÍ KONCENTRÁTOROVÝCH SOLÁRNÍCH PANELŮ. In 33. Nekonvenční zdroje elektrické energie. 1. Hrotovice: Česká elektrotechnická společnost, 2012. p. 116-119. ISBN: 978-80-02-02372- 2.Detail
VYROUBAL, P.; MAXA, J.; VONDRÁK, J.; KAZDA, T. MODELING AND NUMERICAL SIMULATION OF LITHIUM ION BATTERY. In Advanced Batteries Accumulators and Fuel Cells - 13th ABAF Book of Proceedings. Brno: Brno University of Technology, 2012. p. 118-124. ISBN: 978-80-214-4610- 6.Detail
2011
MAXA, J.; NEDĚLA, V. IMPACT OF THE CRITICAL FLOW ON CONDITIONS OF THE PRIMARY ELECTRON BEAM PASSAGE THROUGH THE DIFFERENTIALLY PUMPED CHAMBER. Advances in Military Technology, 2011, vol. 6, no. 1, p. 39-46. ISSN: 1802- 2308.Detail
2007
MAXA, J.; NEDĚLA, V. Selection of PDM Information System. Solid State Phenomena, 2007, vol. 15, no. 3, p. 12-17. ISSN: 1012- 0394.Detail
MAXA, J. Mechanical Desktop. VUT FEKT Brno: 2007. p. 1 ( p.)Detail
MAXA, J. PODKLADY PRO CVIČENÍ PŘEDMĚTU: ŘÍZENÍ A SPRÁVA DAT - SKUPINA "ZAVLHČOVACÍ ZAŘÍZENÍ.". VUT Brno, 2007. p. 1-46. Detail
MAXA, J. PODKLADY PRO CVIČENÍ PŘEDMĚTU: ŘÍZENÍ A SPRÁVA DAT - SKUPINA "DETEKTOR.". VUT Brno, 2007. p. 1-45. Detail
MAXA, J. PODKLADY PRO CVIČENÍ PŘEDMĚTU: ŘÍZENÍ A SPRÁVA DAT - SKUPINA "KOMORA UZAVŘENÁ.". VUT Brno, 2007. p. 1-31. Detail
MAXA, J. PODKLADY PRO CVIČENÍ PŘEDMĚTU: ŘÍZENÍ A SPRÁVA DAT - SKUPINA "KOMORA OTEVŘENÁ.". VUT Brno, 2007. p. 1-31. Detail
MAXA, J. PODKLADY PRO CVIČENÍ PŘEDMĚTU: ŘÍZENÍ A SPRÁVA DAT - SKUPINA "KUŽELOVÁ VARIANTA.". VUT Brno, 2007. p. 1-22. Detail
MAXA, J.; NEDĚLA, V. Selection of PDM Information System. Kaunas, Lithuania: Kauno technologijos universitetas, 2007. p. 277-277. Detail
MAXA, J.; NEDĚLA, V. Teorie zavedení simulovaného prostředí EPD a PDM do výuky. VUT FEKT Brno: 2007. p. 1 ( p.)Detail
2006
Maxa J.,Neděla V. Selection of PDM Information System. In XIX. Didmattech 2006. Komárno: UJS komárno, 2006. p. 293-244. ISBN: 978-80-89234-23- 3.Detail
MAXA, J. Třírozměrné modelování a simulace. VUT FEKT Brno: 2006. p. 1 ( p.)Detail
MAXA, J. Řízení a správa dat. VET FEKT Brno: 2006. p. 1 ( p.)Detail
KAZELLE, J.; KALÁB, P.; ZATLOUKAL, M.; SEDLAŘÍKOVÁ, M.; VANĚK, J.; MAXA, J. Výrobní procesy. Brno: FEKT VUT, 2006. p. 1 ( p.)Detail
Neděla V., Maxa J., Autrata R. Environmental Scanning Electron Microscope Aquasem II - the Design and Applications. In Recent Trends in Charged Particle Optics and Surface Physics Instruments. 10th. Brno: Institute of Scientific Instruments of AS CR, 2006. p. 55 ( p.)ISBN: 80-239-6285- X.Detail
NEDĚLA, V.; MAXA, J. Hydratační systém pro environmentální rastrovací elektronové mikroskopy. Jemná mechanika a optika, 2006, vol. 2006, no. 11- 12, p. 329 ( p.)ISSN: 0447- 6441.Detail
Maxa J., Neděla V. Experience with the establishment of teaching solidworks. In Engineering Mechanics 2006. Svratka: ITAM ASCR Praha, 2006. p. 238 ( p.)ISBN: 80-86246-27- 2.Detail
Maxa J., Neděla V. Výuka electronics product definition pomocí Solidworks. In Kybernetika a informatika. Michalovce: FEI STU Bratislava, 2006. p. 132 ( p.)ISBN: 80-227-2431- 9.Detail
2005
Maxa J, Neděla V, Procházka P. Selection of PDM Information System. 2005, vol. 2005, no. 2, p. 170 ( p.)Detail
Maxa J., Neděla V., Procházka P. Selection of Information System for the Concerns. In Engineering Mechanics 2005. Svratka: 2005. p. 219 ( p.)ISBN: 80-85918-93- 5.Detail
Maxa J., Neděla V. Selection of PDM information System. International Conference on Engineering Education and Research "Progress Through Partnership", 2005, vol. 2005, no. 3, p. 453 ( p.)ISSN: 1562- 3580.Detail
2004
MAXA, J. Provázanost podniků se školstvím v oblasti CAx a PDM. MM Průmyslové spektrum, 2004, vol. 2004, no. 1, p. 58 ( p.)ISSN: 1212- 2572.Detail
MAXA, J. Metodika výběru systému PDM. MM Průmyslové spektrum, 2004, vol. 2004, no. 6, p. 52 ( p.)ISSN: 1212- 2572.Detail
MAXA, J., PROCHÁZKA, P., NEDĚLA, V. K PROBLEMATICE INOVACÍ V OBLASTI VÝUKY POČÍTAČOVÝCH PODPOR VÝROBY. In Proceedings of 45th International Conference of Machine Design Departments. Blansko: 2004. p. 292 ( p.)ISBN: 80-214-2702- 7.Detail
2003
MAXA, J., PROCHÁZKA, P., NEDĚLA, V. Zkušenosti se zaváděním výuky EPD a PDM. In Engineering Mechanics 2003. Žďár nad Sázavou: 2003. p. 198 ( p.)ISBN: 80-86246-18- 3.Detail
MAXA, J. Současný trend v oblasti CAx a PDM technologií. MM Průmyslové spektrum, 2003, vol. 2003, no. 6, p. 16 ( p.)ISSN: 1212- 2572.Detail | WWW
PROCHÁZKA, P., MAXA, J. VÝUKA POČÍTAČOVÝCH PODPOR PŘÍPRAVY VÝROBY. In DIDMATTECH 2003. Votobia Olomouc, Universita Palackého, Olomouc, 2003. p. 128 ( p.)ISBN: 80-7220-150- 6.Detail
MAXA, J., NEDĚLA, V., PROCHÁZKA, P. Diagnostika jako součást elektronické definice výrobku (EPD) ve výuce. In DIS 2003. Košice: Technická univerzita Košice, 2003. p. 15 ( p.)ISBN: 80-8073-046- 6.Detail
MAXA, J., PROCHÁZKA, P. Směr vývoje v oblasti CA.. technologií a správy dat. In Sborník referátů XLIV. Konference kateder ČMS s mezinárodní účastí. Praha: 2003. p. 184 ( p.)ISBN: 80-01-02788- 0.Detail
2002
BAČA, P., MAXA, J. Experience with the Establishment of Teaching EPD. In STO- 8 MODERNÍ SMĚRY VÝUKY ELEKTROTECHNIKY A ELEKTRONIKY. Brno: Katedra elektrotechniky a elektroniky VA Brno, Ústav teoretické a experimentální elektrotechniky FEKT VUT Brno, 2002. p. 25 ( p.)ISBN: 80-214-2190- 8.Detail
2000
MAXA, J. Problematika výuky v oblasti elektronické definice výrobku. In Sborník XLI. konference kateder částí a mech. strojů. 3. International konference Concrete and conrete structures. Košice: Košice, 2000. p. 89 ( p.)ISSN: 80-7100-954- 7.Detail
1999
MAXA, J. Zkušenosti se zaváděním výuky EPD a PDM. In Sborník XXXX. konference kateder částí a mech. strojů. Žilina: Žilinská univerzita, 1999. p. 63 ( p.)ISBN: 80-7100-636- X.Detail
MAXA, J. Experience with the establishment of teaching EPD and PDM. In Journal of mechanical engineering. University of Maribor: University of Maribor, 1999. p. 56 ( p.)Detail
1998
MAXA, J. CADDS5 - Přehled ikon parametrického modeláře. učebnice. učebnice. Praha: Inter Informatics, 1998. 36 p.Detail
MAXA, J. Zkušenosti se zaváděním výuky konstruování metodou EPD. In Sborník XXXIX. konference kateder částí a mech. strojů, Liberec. Technická univerzita v Liberci: Technická univerzita v Liberci, 1998. p. 195 ( p.)ISBN: 80-7083-295- 9.Detail
MAXA, J. CADDS5 - Explicit. učebnice. učebnice. Praha: Inter Informatics, 1998. 45 p.Detail
1997
MAXA, J. CADDS5 - Parametrické modelování, díl II. učebnice. učebnice. Praha: Inter Informatics, 1997. 52 p.Detail
MAXA, J. CADDS5 - Sketcher. učebnice. učebnice. Praha: Inter Informatics, 1997. 43 p.Detail
1996
MAXA, J. CADDS5 - Parametrické modelování, díl I. učebnice. učebnice. Praha: Inter Informatics, 1996. 65 p.Detail
1995
MAXA, J. Modernizace laboratorní výuky v předmětu Části strojů. In Sborník XXXVI. konference kateder částí a mech. strojů. Brno: VUT FS BRNO, 1995. p. 63 ( p.)Detail
*) Publications are generated once a 24 hours.