doc. Ing.

Jan Klusák

Ph.D.

FME – External Cooperator

Send BUT message

doc. Ing. Jan Klusák, Ph.D.

Publications

  • 2021

    KLUSÁK, J.; KOPP, D. 3D assessment of surface influence on crack initiation in sharp notches under a mixed mode of loading. Theoretical and Applied Fracture Mechanics, 2021, vol. 112, no. 1, p. 1-11. ISSN: 0167-8442.
    Detail | WWW

    VYHLÍDAL, M.; KLUSÁK, J. Vliv výrobních tolerancí zkušebního tělesa na hodnotu iniciační síly. Juniorstav 2021: 23. odborná konference doktorského studia s mezinárodní účastí, Sborník příspěvků. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2021. p. 385-390. ISBN: 978-80-86433-75-2.
    Detail

    KLUSÁK, J.; KOPP, D. The role of the surface in crack initiation in sharp and bi-material notches. 2021.
    Detail

  • 2020

    VYHLÍDAL, M.; KLUSÁK, J. A CRACK APPROACHING THE EDGE OF THE AGGREGATE. The 3rd International Conference on Sustainable Development in Civil, Urban and Transportation Engineering 2020 Book of Abstracts. Ostrava: VŠB Technical University of Ostrava, Faculty of Civil Engineering, 2020. p. 43-46. ISBN: 978-80-248-4457-2.
    Detail

    VYHLÍDAL, M.; KLUSÁK, J. A Crack Approaching the Edge of the Aggregate. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 2020, vol. 20, no. 2, p. 47-52. ISSN: 1804-4824.
    Detail | WWW

    SEITL, S.; POKORNÝ, P.; MIARKA, P.; KLUSÁK, J.; KALA, Z.; KUNZ, L. Comparison of fatigue crack propagation behaviour in two steel grades S235, S355 and a steel from old crane way. MATEC Web of Conferences. EDP Sciences, 2020. p. 1-6. ISSN: 2261-236X.
    Detail | WWW | Full text in the Digital Library

    VYHLÍDAL, M.; KLUSÁK, J. Vliv parametrů GMTS kritéria na odhad lomového chování cementového kompozitu. Sborník příspěvků Juniorstav 2020. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2020. p. 462-467. ISBN: 978-80-86433-73-8.
    Detail

  • 2019

    PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. COMPOSITE STRUCTURES, 2019, vol. 208, no. 1, p. 479-497. ISSN: 0263-8223.
    Detail | WWW

    VYHLÍDAL, M.; KLUSÁK, J. Analýza šíření trhliny v tělese s nehomogenitou. In Sborník příspěvků konference JUNIORSTAV 2019. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2019. p. 228-233. ISBN: 978-80-86433-71-4.
    Detail

    PROFANT, T.; HRSTKA, M.; KLUSÁK, J. Microcrack interaction with circular inclusion and interfacial zone. Frattura ed Integrita Strutturale, 2019, vol. 13, no. 48, p. 503-512. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    VYHLÍDAL, M.; KLUSÁK, J. The influence of polygonal cavity on fracture behaviour of concrete. In Procedia Structural Integrity. Procedia Structural Integrity. Online: Elsevier, 2019. p. 690-697. ISSN: 2452-3216.
    Detail | WWW

    KLUSÁK, J.; KREPL, O.; PROFANT, T. An easy and engineering stability criterion of general singular stress concentrators. Theoretical and Applied Fracture Mechanics, 2019, vol. 104, no. 1, p. 102341-102352. ISSN: 0167-8442.
    Detail | WWW

  • 2018

    MALÍKOVÁ, L.; KLUSÁK, J. Influence of the Interfacial Transition Zone on crack behavior in a matrix/aggregate system. In 22th European Conference on Fracture. Procedia Structural Integrity. Bělehrad, Srbsko: 2018. p. 1798-1803. ISSN: 2452-3216.
    Detail

    SEITL, S.; MIARKA, P.; KLUSÁK, J.; BLASÓN, S.; FERNÁNDEZ-CANTELI, A. Comparison of Fatigue Properties of S235 J2 and S355 J2 using ProFatigue software. In PROGRAM AND BOOK OF ABSTRACTS. 2018. p. 115-115. ISBN: 978-961-94088-2-7.
    Detail | WWW

    MALÍKOVÁ, L.; KLUSÁK, J. Multi-parameter fracture mechanics: Crack approaching a bi-material interface. In Local Mechanical Properties. Key Engineering Materials (print). Trans Tech Publications Ltd, 2018. p. 79-84. ISBN: 978-3-0357-1242-1. ISSN: 1013-9826.
    Detail | WWW

    SEITL, S.; MIARKA, P.; KLUSÁK, J.; DOMSKI, J.; KATZER, J.; ŠIMONOVÁ, H.; KERŠNER, Z. Change of a Crack Propagation Rate in Fine-Grained Cement-Based Composites due to Partial Replacement of Aggregate by Ceramic Waste. In Non-Traditional Cement and Concrete. Key Engineering Materials (print). Switzerland: Trans Tech Publication Ltd., 2018. p. 111-115. ISBN: 978-3-0357-1096-0. ISSN: 1013-9826.
    Detail

    SEITL, S.; MIARKA, P.; POKORNÝ, P.; FINTOVÁ, S.; KLUSÁK, J. Influence of Micro-Structure on the Fatigue Crack Propagation in Bridge Steel. In Proceedings Volume 2(8), ICEM 2018. Proceedings — Open Access Journal. MDPI, 2018. p. 1-6. ISSN: 2504-3900.
    Detail | WWW | Full text in the Digital Library

  • 2017

    MALÍKOVÁ, L.; KLUSÁK, J. Interaction between edge-crack and aggregate in silicate-based composite. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2017, vol. 17, no. 2, p. 59-64. ISSN: 1213-1962.
    Detail

    KREPL, O.; KLUSÁK, J. The influence of non-singular terms on the precision of stress description near a sharp material inclusion tip. Theoretical and Applied Fracture Mechanics, 2017, no. 90, p. 85-99. ISSN: 0167-8442.
    Detail | WWW

    MALÍKOVÁ, L.; KLUSÁK, J. Interaction between edge-crack and aggregate in silicate-based composite. Conference on Local Mechanical Properties. 2017. p. 31-32.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J. Vzájemné působení trhliny a zrna kameniva v kompozitu na silikátové bázi. In Modelování v mechanice 2017. Ostrava, Česká republika: 2017. p. 1-6. ISBN: 978-80-248-4010-9.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J.; KERŠNER, Z. Assessment of crack stability in a quasi-brittle particle composite. In Structural and Physical Aspect of Construction Engineering. Procedia Engineering. Elsevier, 2017. p. 49-53. ISSN: 1877-7058.
    Detail | WWW | Full text in the Digital Library

    PROFANT, T.; HRSTKA, M.; KLUSÁK, J.; KERŠNER, Z. On the Energy Release Rate of the Crack Emanating from the Inclusion Interphase. In ENGINEERING MECHANICS 2017. Engineering mechanics 2014. Dolejškova 5, Prague 8, 182 00, Czech Republic: ACAD SCI CZECH REPUBLIC, INST THERMOMECHANICS, 2017. p. 806-809. ISBN: 978-80-214-5497-2. ISSN: 1805-8248.
    Detail | WWW

    SEITL, S.; MIARKA, P.; SOBEK, J.; KLUSÁK, J. A numerical investigation of the stress intensity factor for a bent chevron notched specimen: Comparison of 2D and 3D solutions. In Procedia Structural Integrity. Procedia Structural Integrity. 2017. p. 737-744. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    SEITL, S.; MIARKA, P.; KALA, Z.; KLUSÁK, J. Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure. In Procedia Structural Integrity. Procedia Structural Integrity. 2017. p. 697-704. ISSN: 2452-3216.
    Detail | WWW | Full text in the Digital Library

    ŠIMONOVÁ, H.; VYHLÍDAL, M.; KUCHARCZYKOVÁ, B.; BAYER, P.; KERŠNER, Z.; MALÍKOVÁ, L.; KLUSÁK, J. Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement- based composites. Frattura ed Integrita Strutturale, 2017, no. 41, p. 211-219. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

    SEITL, S.; MIARKA, P.; KLUSÁK, J.; DOMSKI, J.; KATZER, J.; ŠIMONOVÁ, H.; KERŠNER, Z. Change of a crack propagation rate in fine-grained cement- based composites due to partial replacement of aggregate by ceramic waste. Proceedings of the International Conference NON-TRADITIONAL CEMENT & CONCRETE VI. Brno: Brno University of Technology, 2017. p. 46-47. ISBN: 978-80-214-5507- 8.
    Detail

    KREPL, O.; KLUSÁK, J. Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion. Frattura ed Integrita Strutturale, 2017, vol. 11, no. 42, p. 66-73. ISSN: 1971-8993.
    Detail | WWW | Full text in the Digital Library

  • 2016

    VYHLÍDAL, M.; ŠIMONOVÁ, H.; VESELÝ, V.; KERŠNER, Z.; KLUSÁK, J.; MALÍKOVÁ, L. Basic features of aggregate-matrix-interface fracture of concrete: pilot modelling. In Advances and Trends in Engineering Sciences and Technologies II. London: Taylor & Francis Group, 2016. p. 309-314. ISBN: 978-1-138-03224-8.
    Detail

    O. Krepl, J. Klusák, T. Profant. Analytical-numerical determination of stress distribution around a tip of polygon-like inclusion. Key Engineering Materials (web), 2016, vol. 1, no. 713, p. 94-98. ISSN: 1662-9795.
    Detail

    KREPL, O.; KLUSÁK, J. Multi-parameter Based Stress Distribution in Vicinity of Sharp Material Inclusion Tip. Solid State Phenomena, 2016, no. 258, p. 169-173. ISSN: 1012-0394.
    Detail

    J. Klusák, O. Krepl, T. Profant. Behaviour of a crack in a corner or at a tip of a polygon-like particle. In Procedia Structural Integrity. Procedia Structural Integrity. 2016. p. 1912-1919. ISSN: 2452-3216.
    Detail | WWW

    O. Krepl, J. Klusák. Reconstruction of a 2D stress field around the tip of a sharp material inclusion. Procedia Structural Integrity, 2016, vol. 1, no. 2, p. 1920-1927. ISSN: 2452-3216.
    Detail

    MALÍKOVÁ, L.; KLUSÁK, J.; KERŠNER, Z. Assessment of crack stability in a quasi- brittle particle composite. Space 2016. Košice, Slovenská republika: 2016. p. 1-2. ISBN: 978-80-553-2643- 6.
    Detail

  • 2014

    KLUSÁK, J.; KOPP, D.; PROFANT, T. Bi-material notches under various normal- shear loading modes. Key Engineering Materials (print), 2014, vol. 577- 578, no. 1, p. 361-364. ISSN: 1013- 9826.
    Detail

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M.; HRSTKA, M.; MARCIÁN, P. An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi- material orthotropic notch. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). Switzerland: Trans Tech Publications, 2014. p. 745-748. ISSN: 1013-9826.
    Detail

    KLUSÁK, J.; HRSTKA, M.; PROFANT, T.; KREPL, O.; ŠEVEČEK, O.; KOTOUL, M. The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theoretical and Applied Fracture Mechanics, 2014, vol. 71, no. 2014, p. 67-75. ISSN: 0167-8442.
    Detail

    HRSTKA, M.; PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. A Stability Criterion of an Orthotropic Bi-Material Notch Based on the Strain Energy Density. In Engineering Mechanics 2014. 1. Svratka: BUT, 2014. p. 232-235. ISBN: 978-80-214-4871-1.
    Detail

    KREPL, O.; KLUSÁK, J.; PROFANT, T.; HRSTKA, M. Stress distribution and fracture parameters of orthotropic bi-material notches determination. 2014.
    Detail

  • 2013

    KLUSÁK, J.; PROFANT, T.; KNÉSL, Z.; KOTOUL, M. The influence of discontinuity and orthotropy of fracture toughness on conditions of fracture initiation in singular stress concentrators. Engineering Fracture Mechanics, 2013, vol. 110, no. 2013, p. 438-447. ISSN: 0013- 7944.
    Detail

    SEITL, S.; KLUSÁK, J.; FERNÁNDEZ, P.; CANTELI, A. Thermographic determination methods: Application on fatigue limit of al 2024 for R=0. 1. Velké Karlovice, Česká republika: 2013. p. 1-2.
    Detail

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; KOTOUL, M. On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non- uniform fracture mechanics properties. Key Engineering Materials (print), 2013, vol. 525- 526, no. 1, p. 545-548. ISSN: 1013- 9826.
    Detail

    PROFANT, T.; KLUSÁK, J.; ŠEVEČEK, O.; HRSTKA, M.; KOTOUL, M. An energetic criterion for a micro-crack of finite length initiated in orthotropic bi- material notches. Engineering Fracture Mechanics, 2013, vol. 110, no. 2013, p. 396-409. ISSN: 0013- 7944.
    Detail

  • 2012

    HOLUŠOVÁ, T.; KLUSÁK, J.; SEITL, S. Vliv vybraných parametrů na průběh protlačovací zkoušky. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2012, vol. XII, no. 2, p. 313-322. ISSN: 1213- 1962.
    Detail

    KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Conditions for crack initiation in an orthotropic bi- material notch. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2012, vol. 2012 (19), no. 4, p. 302-307. ISSN: 1537- 6494.
    Detail

    HOLUŠOVÁ, T.; KLUSÁK, J.; SEITL, S. Protlačovací zkouška: Numerická studie vlivu velikosti betonové části na průběh zatěžovací zkoušky. In Víceúrovňový design pokrokových materiálů 2012. Brno: Ústav fyziky materiálů, 2012. p. 87-94. ISBN: 978-80-87434-06- 2.
    Detail

    KLUSÁK, J.; PROFANT, T.; ŠEVEČEK, O.; KOTOUL, M. Crack propagation from bi-material notches - matched asymptotic procedure. Key Engineering Materials (print), 2012, vol. 488- 489, no. 2012, p. 416-419. ISSN: 1013- 9826.
    Detail

  • 2011

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M. Case Criterion of Crack Onset in Orthotropic Bi- Material Notches. Key Engineering Materials, 2011, vol. 465, no. 1, p. 157-160. ISSN: 1013- 9826.
    Detail

    ŘOUTIL, L.; VESELÝ, V.; SEITL, S.; KLUSÁK, J. Optimal propotions of wedge splitting test specimen for testing of various cement based composites. Luxor, Egypt: 2011. p. 457-465.
    Detail

    KLUSÁK, J.; KNÉSL, Z.; PROFANT, T. The influence of discontinuity of fracture-mechanics parameters on the failure manner of multi- material structures. In Proceedings of Computational Modeling of Fracture and Failure of Materials and Structures. 1. Barcelona, Španělsko: cimne, 2011. p. 1-4. ISBN: 978-84-87867-66- 8.
    Detail

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M. THE ANALYSIS OF THE CRACK INITIATED FROM THE ORTHOTROPIC BI- MATERIAL SHARP NOTCH. In ENGINEERING MECHANICS. 1. Prague: Institute of Thermomechanics - Academy of Sciences of the Czech Republic - Prague, 2011. p. 103-107. ISBN: 978-80-87012-33- 8.
    Detail

  • 2010

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M. CONDITIONS FOR CRACK INITIATION IN AN ORTHOTROPIC BI- MATERIAL CORNER DETERMINED BY MEANS OF THE STRAIN ENERGY DENSITY FACTOR. In Multiscaling of Synthetic and Natural Systems with Self- Adaptive Capability. Taipei: National Taiwan University of Science and Technology, 2010. p. 149-152. ISBN: 978-986-02-3909- 6.
    Detail

    ŘOUTIL, L.; VESELÝ, V.; SEITL, S.; KLUSÁK, J. Posouzení geometrie zkušebního tělesa pro WST kvazikřehkých kompozitů: Numerická studie. In Křehký lom 2010. Brno, Česká repoublika: 2010. p. 201-212. ISBN: 978-80-87434-01- 7.
    Detail

    SEITL, S.; KLUSÁK, J.; ŘOUTIL, L. Numerická studie vlivu šířky drážky pro aplikaci zatížení na chování iniciační trhliny v tělese pro WST. In Modelování v mechanice 2010. Ostrava, Česká republika: 2010. p. 43-49. ISBN: 978-80-248-2234- 1.
    Detail

    SEITL, S.; KLUSÁK, J.; VESELÝ, V.; ŘOUTIL, L. Wedge-Splitting Test Determination of Minimal Starting Notch Length for Various Cement Based Composites. Part II: Crack and Notch Fracture Mechanics Approaches. Key Engineering Materials, 2010, vol. 10, no. 4, p. 81-84. ISSN: 1013- 9826.
    Detail

    KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Determination of the threshold values of orthotropic bi- material notches. Procedia Engineering, 2010, vol. 2, no. 1, p. 1635-1642. ISSN: 1877- 7058.
    Detail

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M. On the crack initiated from the bi- material notch tip. Key Engineering Materials, 2010, vol. 452- 453, no. 1, p. 441-444. ISSN: 1013- 9826.
    Detail

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M. A study of the stability of sharp notches in the orthotropic heterogeneous media. In The Ninth International Conference on Multiaxial Fatigue & Fracture (ICMFF9). 2010. p. 733-740. ISBN: 978-88-95940-31- 1.
    Detail

    KORBEL, J.; KLUSÁK, J.; KNÉSL, Z. Prediction of brittle fracture of epoxy- aluminum flanging. Applied andComputational Mechanics, 2010, vol. 4, no. 1, p. 49-56. ISSN: 1802- 680X.
    Detail

  • 2009

    KOTOUL, M.; PROFANT, T.; ŠEVEČEK, O.; KLUSÁK, J. Computational model of the transition of crack across the sharp material interface. In 12th International Conference on Fracture. 2009. p. 1-10. ISBN: 9781617382277.
    Detail

    PROFANT, T.; KLUSÁK, J.; KOTOUL, M.; KNÉSL, Z. Application of the generalized linear elastic fracture mechanics to NiTi catheter. Brazílie: SBPMat, 2009. p. 1 (1 s.).
    Detail

    KLUSÁK, J.; PROFANT, T.; KOTOUL, M. Study of stress distribution around an orthotropic bi- material notch tip. Key Engineering Materials (print), 2009, vol. 417- 418, no. 1, p. 385-388. ISSN: 1013- 9826.
    Detail

  • 2008

    NÁHLÍK, L.; KNÉSL, Z.; KLUSÁK, J. CRACK INITIATION CRITERIA FOR SINGULAR STRESS CONCENTRATIONS, Part III: An Application to a Crack Touching a Bimaterial Interface. Engineering Mechanics, 2008, vol. 15, no. 2, p. 99-114. ISSN: 1802- 1484.
    Detail

    KLUSÁK, J.; PROFANT, T.; KOTOUL, M. A comparison of two direct methods of generalized stress intesity factor calculations of bi- material notches. Key Engineering Materials (print), 2008, vol. 385, no. 1, p. 409-412. ISSN: 1013- 9826.
    Detail

    SEITL, S.; ŘOUTIL, L.; KLUSÁK, J.; VESELÝ, V. The influence of the shape of a saw-cut notch in quasi- brittle 3PB specimens on the critical applied force. Applied andComputational Mechanics, 2008, vol. 2, no. 1, p. 123-132. ISSN: 1802- 680X.
    Detail

  • 2007

    KLUSÁK, J.; KNÉSL, Z.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part II: Stability of sharp and bi- material notches. Engineering Mechanics, 2007, vol. 14, no. 6, p. 409-423. ISSN: 1802- 1484.
    Detail

    KNÉSL, Z.; KLUSÁK, J.; NÁHLÍK, L. Crack initiation criteria for singular stress concentrations Part I: A universal assessment of singular stress concentrations. Engineering Mechanics, 2007, vol. 14, no. 6, p. 399-408. ISSN: 1802- 1484.
    Detail

    SEITL, S.; KLUSÁK, J.; KNÉSL, Z.; KERŠNER, Z. Influence of notch geometry on fracture behaviour of three-point bend notched specimens from quasi- brittle materials. Cape Town, South Africa: 2007. p. 245-246.
    Detail

    SEITL, S.; KLUSÁK, J.; KERŠNER, Z. Vliv šířky zářezu na růst trhliny pro různé konfigurace vzorků pro tříbodový ohyb. Materiálové inžinierstvo, 2007, vol. 14, no. 3, p. 213-219. ISSN: 1335- 0803.
    Detail

    SEITL, S.; KLUSÁK, J.; KERŠNER, Z.; KNÉSL, Z. Evaluation of notch geometry effect on behaviour of fracture toughness testing specimen. In Engineering mechanics 2007. Svratka, Česká republika: 2007. p. 243-244. ISBN: 978-80-87012-06- 2.
    Detail

    SEITL, S.; KLUSÁK, J.; KNÉSL, Z.; KERŠNER, Z. Influence of notch geometry on fracture behaviour of three-point bend notched specimens from quasi- brittle materials. In Recent Developments in structural engineering, mechanics and computation. Cape Town, south Africa: 2007. p. 655-658. ISBN: 978-90-5966-054- 0.
    Detail

    FRANTÍK, P.; KERŠNER, Z.; KLUSÁK, J.; SEITL, S. Lomová houževnatost z tříbodového ohybu vzorků z kvazikřehkých materiálů: korekce vzhledem k šířce zářezu. In Experiment 2007. Brno, Česká republika: 2007. p. 77-80. ISBN: 978-80-7204-543- 3.
    Detail

    SEITL, S.; KLUSÁK, J.; KERŠNER, Z.; KNÉSL, Z. Evaluation of notch geometry effect on behaviour of fracture toughness testing specimen. Svratka, Česká republika: 2007. p. 243-244.
    Detail

*) Publications are generated once a 24 hours.