Publications

• 2025

  ŠEBEK, F.; KUBÍK, P.; ZAPLETAL, J.; KUNČICKÁ, L.; KOCICH, R.; PAGÁČ, M.; PAŠKA, Z.; FOJTÍK, F.; HALAMA, R. Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, vol. 137, no. 7-8, p. 3933-3948. ISSN: 0268-3768.
  Detail | WWW

• 2024

  KUBÍK, P.; ŠEBEK, F.; HASSAN VAND, M.; BRABEC, M.; TIPPNER, J. Fracture predictions in impact three-point bending test of European beech. JOURNAL OF WOOD SCIENCE, 2024, vol. 70, no. 1, p. 1-12. ISSN: 1435-0211.
  Detail | WWW | Full text in the Digital Library

  ŠEBEK, F.; SALVET, P.; BOHÁČ, P.; ADÁMEK, R.; VĚCHET, S.; NÁVRAT, T.; ZAPLETAL, J.; GANJIANI, M. Size Effect on the Ductile Fracture of the Aluminium Alloy 2024-T351. EXPERIMENTAL MECHANICS, 2024, vol. 64, no. 1, p. 1483-1495. ISSN: 0014-4851.
  Detail | WWW | Full text in the Digital Library

• 2023

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; NÁVRAT, T.; ZAPLETAL, J. Multiaxial ductile fracture criteria coupled with non-quadratic non-prismatic yield surface in the predictions for a naturally aged aluminium alloy. INTERNATIONAL JOURNAL OF FRACTURE, 2023, vol. 239, no. 1, p. 41-67. ISSN: 0376-9429.
  Detail | WWW

  VOBEJDA, R.; ŠEBEK, F. Comparison of associated and non-associated plasticity models for aluminium alloys. Engineering Mechanics 2023. 2023. p. 263-266. ISBN: 978-80-87012-84-0.
  Detail

  KUBÍK, P.; VOBEJDA, R.; PETRUŠKA, J.; ŠEBEK, F. Numerical simulations of plane strain tension for nickel-based alloy 718. Engineering Mechanics 2023. 2023. p. 143-146. ISBN: 978-80-87012-84-0.
  Detail

  KUBÍK, P.; PETRUŠKA, J.; JUDAS, J.; ŠEBEK, F. Computational prediction of chevron cracking during multi-pass cold forward extrusion. Journal of Manufacturing Processes, 2023, vol. 102, no. 2023, p. 154-168. ISSN: 1526-6125.
  Detail | WWW

  KUBÍK, P.; ŠEBEK, F.; KREJČÍ, P.; BRABEC, M.; TIPPNER, J.; DVOŘÁČEK, O.; LECHOWICZ, D.; FRYBORT, S. Linear woodcutting of European beech: experiments and computations. WOOD SCIENCE AND TECHNOLOGY, 2023, vol. 57, no. 1, p. 51-74. ISSN: 0043-7719.
  Detail | WWW | Full text in the Digital Library

• 2022

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Evaluation of damage accumulation for ductile materials. Engineering Mechanics 2022. 2022. p. 353-356. ISBN: 978-80-86246-48-2.
  Detail

  MAŠEK, J.; LÖFFELMANN, F.; POPELA, R.; KUBÍK, P.; ŠEBEK, F.; KOUTNÝ, D.; MALÝ, M.; PANTĚLEJEV, L.; PAMBAGUIAN, L. Additive manufacturing capabilities for heat switch technology: Key challenges & knowledge gaps. Lille, Francie: EUCASS association, 2022. p. 1-15.
  Detail | WWW | Full text in the Digital Library

  BRABEC, M.; TIPPNER, J.; VALENTA, J.; ŠEBEK, F.; DVOŘÁČEK, O. Quantitative and qualitative analysis of strain near the cutting edge during high-speed machining of hardwood. In 10th Hardwood Conference. 2022. p. 251-256. ISBN: 978-963-334-446-0.
  Detail

  VOBEJDA, R.; ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Solution to problems caused by associated non-quadratic yield functions with respect to the ductile fracture. INTERNATIONAL JOURNAL OF PLASTICITY, 2022, vol. 154, no. 1, p. 1-36. ISSN: 0749-6419.
  Detail | WWW | Full text in the Digital Library

  KOŠŤÁL, J.; ŠEBEK, F.; PETRUŠKA, J.; SEIFERT, T. Cyclic plasticity models and fatigue criteria for exhaust manifold life assessment in the context of limited material data available. MATERIALS AT HIGH TEMPERATURES, 2022, vol. 39, no. 1, p. 68-85. ISSN: 0960-3409.
  Detail | WWW

• 2021

  ŠEBEK, F.; KUBÍK, P.; TIPPNER, J.; BRABEC, M. Orthotropic elastic–plastic–damage model of beech wood based on split Hopkinson pressure and tensile bar experiments. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2021, vol. 157, no. 1, p. 1-13. ISSN: 0734-743X.
  Detail | WWW

• 2020

  NYTRA, M.; KUBÍK, P.; PETRUŠKA, J.; ŠEBEK, F. A Fully Coupled Thermomechanical Damage Analysis of Hot Closed Die Forging Using Finite Element Modeling. Journal of Materials Engineering and Performance, 2020, vol. 29, no. 12, p. 8236-8246. ISSN: 1059-9495.
  Detail | WWW

  ŠEBEK, F.; KUBÍK, P.; BRABEC, M.; TIPPNER, J. Modelling of impact behaviour of European beech subjected to split Hopkinson pressure bar test. COMPOSITE STRUCTURES, 2020, vol. 245, no. 1, p. 1-11. ISSN: 0263-8223.
  Detail | WWW

  KOŘÍNEK, M.; HALAMA, R.; FOJTÍK, F.; PAGÁČ, M.; KRČEK, J.; ŠEBEK, F.; KRZIKALLA, D. Monotonic Testing of 3D Printed SS316L under Multiaxial Loading. In Experimental Stress Analysis 2020. 2020. p. 213-224. ISBN: 978-80-248-4451-0.
  Detail

  VOBEJDA, R.; ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Associated and non-associated flow rules in the stress state prediction. In Engineering Mechanics 2020. 2020. p. 512-515. ISBN: 978-80-214-5896-3.
  Detail

• 2019

  PEČ, M.; ZAPLETAL, J.; ŠEBEK, F.; PETRUŠKA, J. Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings. EXPERIMENTAL TECHNIQUES, 2019, vol. 43, no. 1, p. 41-56. ISSN: 0732-8818.
  Detail

  PEČ, M.; ŠEBEK, F.; PETRUŠKA, J. Basic Kinematic Hardening Rules Applied to 304 Stainless Steel and the Advantage of Parameters Evolution. MECH SOLIDS+, 2019, vol. 54, no. 1, p. 122-129. ISSN: 0025-6544.
  Detail | WWW

  KUBÍK, P.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; NÁVRAT, T. Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy. Journal of Engineering Materials and Technology, 2019, vol. 141, no. 4, p. 1-12. ISSN: 0094-4289.
  Detail | WWW

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Non-associated flow rule in the prediction of complex stress states and deformations. In Experimental Stress Analysis 2019. 2019. p. 488-492. ISBN: 978-80-214-5766-9.
  Detail

  KUBÍK, P.; PETRUŠKA, J.; VOSYNEK, P.; ŠEBEK, F. Lode dependent plasticity in the prediction of deformation states of tensile specimens. In 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). Procedia Structural Integrity. 2019. p. 15-20. ISSN: 2452-3216.
  Detail

  ŠEBEK, F.; ZAPLETAL, J.; KUBÍK, P.; PETRUŠKA, J. Flow behaviour in compression test under various lubrication conditions. In Engineering Mechanics 2019. 2019. p. 351-354. ISBN: 978-80-87012-71-0.
  Detail

  ŠEBEK, F.; PARK, N.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy. Engineering Fracture Mechanics, 2019, vol. 206, no. 1, p. 509-525. ISSN: 0013-7944.
  Detail

  PEČ, M.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; HASSAN, T. Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351. Advances in Mechanical Engineering, 2019, vol. 11, no. 3, p. 1-14. ISSN: 1687-8140.
  Detail | WWW | Full text in the Digital Library

• 2018

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Application of Coupled Ductile Fracture Criterion to Plane Strain Plates. In Engineering and Innovative Materials VI. Defect and Diffusion Forum. 2018. p. 186-190. ISBN: 978-3-0357-1209-4. ISSN: 1012-0386.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Standard tensile test compared to the small punch test of aluminium alloy. In Engineering Mechanics 2018. 2018. p. 745-748. ISBN: 978-80-86246-88-8.
  Detail

  ŠEBEK, F.; DYMÁČEK, P.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. The role of punch eccentricity in small punch testing. In 6th International Small Sample Test Techniques Conference. Ubiquity Proceedings. 2018. p. 43-46. ISSN: 2631-5602.
  Detail

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; PARK, N.; HUH, H. Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations. Theoretical and Applied Fracture Mechanics, 2018, vol. 98, no. 1, p. 186-198. ISSN: 0167-8442.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy. Materials & Design, 2018, vol. 137, no. 1, p. 90-107. ISSN: 0264-1275.
  Detail

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Notched specimen under compression for ductile failure criteria. Mechanics of Materials, 2018, vol. 125, no. 1, p. 94-109. ISSN: 0167-6636.
  Detail

• 2017

  NÁVRAT, T.; PETRUŠKA, J.; VOSYNEK, P.; KUBÍK, P.; ŠEBEK, F.; HOUFEK, L.; HOUFEK, M.; HALABUK, D. Posouzení a zefektivnění provozu nůžek na válcované profily firmy Arcelor Mittal. 2017. p. 1-261.
  Detail

  NÁVRAT, T.; ŠEBEK, F.; PETRUŠKA, J. Analýza porušení spojení páky a čepu a návrh úpravy. 2017. p. 1-19.
  Detail

  ŠEBEK, F.; PETRUŠKA, J. Vývoj procesu rovnání elektrotechnického plechu. 2017. p. 1-16.
  Detail

  ŠPANIEL, M.; MAREŠ, T.; KUŽELKA, J.; ŠEBEK, F.; DŽUGAN, J. Uncoupled material model of ductile fracture with directional plasticity. In Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications. 2017. p. 596-605. ISBN: 978-84-946909-6-9.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Behavior of Lode Dependent Plasticity at Plane Strain Condition and its Implication to Ductile Fracture. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. 2017. p. 213-216. ISBN: 978-3-03835-626-4. ISSN: 1662-9779.
  Detail

  JENÍK, I.; KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test. ARCHIVE OF APPLIED MECHANICS, 2017, vol. 87, no. 6, p. 1077-1093. ISSN: 0939-1533.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Ductile fracture criteria implementation and calibration using the tension–torsion tests. In Engineering Mechanics 2017. 2017. p. 854-857. ISBN: 978-80-214-5497-2.
  Detail

  KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J.; ŠEBEK, F. Simulation of the small punch test of AISI 316L austenitic steel. In Engineering Mechanics 2017. 2017. p. 542-545. ISBN: 978-80-214-5497-2.
  Detail

  PEČ, M.; VOSYNEK, P.; ŠEBEK, F.; NÁVRAT, T. Implementation of American weld connection standards into finite element computations. In 4th International Conference Recent Trends in Structural Materials. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-7. ISSN: 1757-8981.
  Detail | WWW | Full text in the Digital Library

  ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The performance and prediction ability of advanced approach to ductile fracture. In Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications. 2017. p. 588-595. ISBN: 978-84-946909-6-9.
  Detail

• 2016

  ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Strain hardening exponent role in phenomenological ductile fracture criteria. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2016, vol. 57, no. 5-6, p. 149-164. ISSN: 0997-7538.
  Detail

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Ductile fracture criteria in prediction of slant fracture. In ECCOMAS Congress 2016. 2016. p. 6699-6710. ISBN: 978-618-82844-0-1.
  Detail

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F.; BENEŠOVSKÝ, M. Optimal intermeshing of multi roller cross roll straightening machine. In AIP Conference Proceedings 1769. 2016. p. 120002-1 (120002-4 p.)ISBN: 978-0-7354-1427-3.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, vol. 47, no. 11, p. 5302-5312. ISSN: 1073-5623.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. The role of loading path in ductile fracture. In Insights and Innovations in Structural Engineering, Mechanics and Computation. 2016. p. 550-556. ISBN: 978-1-138-02927-9.
  Detail

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, vol. 233, no. 7, p. 53-67. ISSN: 0924-0136.
  Detail

  KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Calibration of ductile fracture criteria at negative stress triaxiality. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, vol. 108-109, no. 4, p. 90-103. ISSN: 0020-7403.
  Detail

  PEČ, M.; KUBÍK, P.; ŠEBEK, F.; NÁVRAT, T.; PETRUŠKA, J. Modeling of the blast load effects in explicit dynamics. In Engineering Mechanics 2016. 2016. p. 442-445. ISBN: 978-80-87012-59- 8.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Verification of Ductile Fracture Criteria Based On Selected Calibration Tests. In Engineering Mechanics 2015. Applied Mechanics and Materials. 2016. p. 450-455. ISBN: 978-3-03835-700- 1. ISSN: 1662- 7482.
  Detail

• 2015

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Chevron crack prediction using the extremely low stress triaxiality test. MM Science Journal, 2015, no. June, p. 617-621. ISSN: 1803- 1269.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Prediction of central bursting in the process of forward extrusion using the uncoupled ductile failure models. Advances in Materials and Processing Technologies, 2015, vol. 1, no. 1-2, p. 43-48. ISSN: 2374-068X.
  Detail

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Critical review of geometry of tension- torsion specimens used in ductile fracture calibration. In Výpočty konstrukcí metodou konečných prvků 2015. 2015. p. 65-66. ISBN: 978-80-87012-56- 7.
  Detail

• 2014

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; RŮŽIČKA, J.; ŠPANIEL, M.; DŽUGAN, J.; PRANTL, A. Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens. In Materials Structure & Micromechanics of Fracture VII. Key Engineering Materials (print). 2014. p. 258-261. ISBN: 9783037859346. ISSN: 1013-9826.
  Detail

  PETRUŠKA, J.; ŠEBEK, F.; KUBÍK, P. Výběr a implementace postupů pro vyhodnocení nízko‐ cyklové únavy vnitřní vestavby jaderných zařízení se zahrnutím víceosé napjatosti. 2014.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Localization Problem of Coupled Ductile Failure Models Compared to Uncoupled Ones. In Engineering Mechanics 2014. Svratka: Brno University of Technology, 2014. p. 632-635. ISBN: 978-80-214-4871-1.
  Detail

  ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Phenomenological Ductile Fracture Criteria Applied to the Cutting Process. World Academy of Science, Engineering and Technology, 2014, vol. 8, no. 12, p. 1204-1207. ISSN: 1307-6892.
  Detail

  ŠEBEK, F.; HŮLKA, J.; KUBÍK, P.; PETRUŠKA, J. On the Proportionality of Damage Rule in Finite Element Simulations of the Ductile Failure. In Modern Technologies for Engineering, Applied Mechanics and Material Science. Advanced Materials Research. 2014. p. 189-193. ISBN: 9783038351580. ISSN: 1022- 6680.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. Euler- type algorithm applied to leveling process analysis. Engineering Mechanics, 2014, vol. 21, no. 3, p. 185-191. ISSN: 1802- 1484.
  Detail

• 2013

  NÁVRAT, T.; PETRUŠKA, J.; VOSYNEK, P.; KUBÍK, P.; ŠEBEK, F. Dynamická analýza rozváděčové skříně - simulace výbuchu. 2013.
  Detail

  PETRUŠKA, J.; KUBÍK, P.; HŮLKA, J.; ŠEBEK, F. Ductile Fracture Criteria in Prediction of Chevron Cracks. Advanced Materials Research, 2013, vol. 716, no. 1, p. 653-658. ISSN: 1022- 6680.
  Detail

  ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Comparison of Various Ductile Fracture Models and Their Fracture Envelopes. In Modelling and Optimization of Physical Systems. Gliwice, Polsko: Katedra Mechaniki Teoretycznej i Stosowanej, 2013. p. 53-58. ISBN: 83-60102-65- 1.
  Detail

  ŠEBEK, F.; PETRUŠKA, J.; NÁVRAT, T. On Advance in Leveling Process of Long Products. In Engineering Mechanics 2013. Svratka: Institute of Thermomechanics, Prague, 2013. p. 502-509. ISBN: 978-80-87012-47- 5.
  Detail

  KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J. Influence of the Testing Machine’ s Stiffness on the Calibration Process of Ductile Failure Models. Bulletin of Applied Mechanics, 2013, vol. 9, no. 34, p. 31-34. ISSN: 1801-1217.
  Detail

• 2012

  PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. A New Model for Fast Analysis of Leveling Process. Advanced Materials Research, 2012, vol. 586, no. 1, p. 389-393. ISSN: 1022- 6680.
  Detail

*) Publications are generated once a 24 hours.